linux-kernel - [PATCH nolibc 15/18] selftests/nolibc: add a "run" target to start the kernel in QEMU

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 31 Aug 2022 11:21:45 -0700
From:   "Paul E. McKenney" <paulmck@...nel.org>
To:     linux-kernel@...r.kernel.org
Cc:     gwml@...r.gnuweeb.org, kernel-team@...com, w@....eu,
        Willy Tarreau <w@....eu>,
        "Paul E . McKenney" <paulmck@...nel.org>
Subject: [PATCH nolibc 15/18] selftests/nolibc: add a "run" target to start the kernel in QEMU

From: Willy Tarreau <w@....eu>

The "run" target will build the kernel and start it in QEMU. The
"rerun" target will not have the kernel dependency and will just try
to start QEMU. The QEMU architecture used to start the kernel is
derived from the configured ARCH. This might need to be improved
for archs which include different variants under the same name
(mips vs mipsel, +/-64, riscv32 vs riscv64). This could be tested
for i386, x86, arm, arm64, mips and riscv (the later two reporting
issues on some tests).

It is possible to pass a test specification for nolibc-test in the TEST
variable, which will be passed as-is as NOLIBC_TEST.

On success, the number of successful tests is printed. On failure, failed
lines are individually printed.

Signed-off-by: Willy Tarreau <w@....eu>
Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
---
 tools/testing/selftests/nolibc/Makefile | 33 +++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile
index c104719eae8b8..7c1f5360f454e 100644
--- a/tools/testing/selftests/nolibc/Makefile
+++ b/tools/testing/selftests/nolibc/Makefile
@@ -31,6 +31,27 @@ DEFCONFIG_mips    = malta_defconfig
 DEFCONFIG_riscv   = defconfig
 DEFCONFIG         = $(DEFCONFIG_$(ARCH))
 
+# optional tests to run (default = all)
+TEST =
+
+# QEMU_ARCH: arch names used by qemu
+QEMU_ARCH_i386    = i386
+QEMU_ARCH_x86     = x86_64
+QEMU_ARCH_arm64   = aarch64
+QEMU_ARCH_arm     = arm
+QEMU_ARCH_mips    = mipsel  # works with malta_defconfig
+QEMU_ARCH_riscv   = riscv64
+QEMU_ARCH         = $(QEMU_ARCH_$(ARCH))
+
+# QEMU_ARGS : some arch-specific args to pass to qemu
+QEMU_ARGS_i386    = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_x86     = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_arm64   = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_arm     = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_mips    = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_riscv   = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS         = $(QEMU_ARGS_$(ARCH))
+
 # OUTPUT is only set when run from the main makefile, otherwise
 # it defaults to this nolibc directory.
 OUTPUT ?= $(CURDIR)/
@@ -61,8 +82,20 @@ defconfig:
 kernel: initramfs
 	$(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs
 
+# run the tests after building the kernel
+run: kernel
+	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
+	$(Q)grep -w FAIL "$(CURDIR)/run.out" && echo "See all results in $(CURDIR)/run.out" || echo "$$(grep -c ^[0-9].*OK $(CURDIR)/run.out) test(s) passed."
+
+# re-run the tests from an existing kernel
+rerun:
+	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
+	$(Q)grep -w FAIL "$(CURDIR)/run.out" && echo "See all results in $(CURDIR)/run.out" || echo "$$(grep -c ^[0-9].*OK $(CURDIR)/run.out) test(s) passed."
+
 clean:
 	$(call QUIET_CLEAN, nolibc-test)
 	$(Q)rm -f nolibc-test
 	$(call QUIET_CLEAN, initramfs)
 	$(Q)rm -rf initramfs
+	$(call QUIET_CLEAN, run.out)
+	$(Q)rm -rf run.out
-- 
2.31.1.189.g2e36527f23