| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2339be29-c35a-67a4-8e98-daf247dd77dd@quicinc.com>
Date: Fri, 2 Sep 2022 01:50:07 +0530
From: Akhil P Oommen <quic_akhilpo@...cinc.com>
To: Philipp Zabel <p.zabel@...gutronix.de>
CC: freedreno <freedreno@...ts.freedesktop.org>,
<dri-devel@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
Rob Clark <robdclark@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Douglas Anderson <dianders@...omium.org>,
<krzysztof.kozlowski@...aro.org>, Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, <linux-clk@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 3/6] clk: qcom: gdsc: Add a reset op to poll gdsc
collapse
On 9/1/2022 3:58 PM, Philipp Zabel wrote:
> On Wed, Aug 31, 2022 at 10:48:24AM +0530, Akhil P Oommen wrote:
>> Add a reset op compatible function to poll for gdsc collapse.
>>
>> Signed-off-by: Akhil P Oommen <quic_akhilpo@...cinc.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
>> ---
>>
>> (no changes since v2)
>>
>> Changes in v2:
>> - Minor update to function prototype
>>
>> drivers/clk/qcom/gdsc.c | 23 +++++++++++++++++++----
>> drivers/clk/qcom/gdsc.h | 7 +++++++
>> 2 files changed, 26 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
>> index 44520ef..2d0f1d1 100644
>> --- a/drivers/clk/qcom/gdsc.c
>> +++ b/drivers/clk/qcom/gdsc.c
>> @@ -17,6 +17,7 @@
>> #include <linux/reset-controller.h>
>> #include <linux/slab.h>
>> #include "gdsc.h"
>> +#include "reset.h"
>>
>> #define PWR_ON_MASK BIT(31)
>> #define EN_REST_WAIT_MASK GENMASK_ULL(23, 20)
>> @@ -116,7 +117,8 @@ static int gdsc_hwctrl(struct gdsc *sc, bool en)
>> return regmap_update_bits(sc->regmap, sc->gdscr, HW_CONTROL_MASK, val);
>> }
>>
>> -static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status)
>> +static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status,
>> + s64 timeout_us, unsigned int interval_ms)
>> {
>> ktime_t start;
>>
>> @@ -124,7 +126,9 @@ static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status)
>> do {
>> if (gdsc_check_status(sc, status))
>> return 0;
>> - } while (ktime_us_delta(ktime_get(), start) < TIMEOUT_US);
>> + if (interval_ms)
>> + msleep(interval_ms);
>> + } while (ktime_us_delta(ktime_get(), start) < timeout_us);
> Could this loop be implemented with read_poll_timeout()?
I felt it is not worth the code churn. Currently, we hit this path only
during GPU recovery which is a rare event.
>
>> if (gdsc_check_status(sc, status))
>> return 0;
>> @@ -172,7 +176,7 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
>> udelay(1);
>> }
>>
>> - ret = gdsc_poll_status(sc, status);
>> + ret = gdsc_poll_status(sc, status, TIMEOUT_US, 0);
>> WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n");
>>
>> if (!ret && status == GDSC_OFF && sc->rsupply) {
>> @@ -343,7 +347,7 @@ static int _gdsc_disable(struct gdsc *sc)
>> */
>> udelay(1);
>>
>> - ret = gdsc_poll_status(sc, GDSC_ON);
>> + ret = gdsc_poll_status(sc, GDSC_ON, TIMEOUT_US, 0);
>> if (ret)
>> return ret;
>> }
>> @@ -565,3 +569,14 @@ int gdsc_gx_do_nothing_enable(struct generic_pm_domain *domain)
>> return 0;
>> }
>> EXPORT_SYMBOL_GPL(gdsc_gx_do_nothing_enable);
>> +
>> +int gdsc_wait_for_collapse(void *priv)
>> +{
>> + struct gdsc *sc = priv;
>> + int ret;
>> +
>> + ret = gdsc_poll_status(sc, GDSC_OFF, 500000, 5);
>> + WARN(ret, "%s status stuck at 'on'", sc->pd.name);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(gdsc_wait_for_collapse);
> Superficially, using this as a reset op seems like abuse of the reset
> controller API. Calling reset_control_reset() on this in the GPU driver
> will not trigger a reset signal on the GPU's "cx_collapse" reset input.
>
> So at the very least, this patchset should contain an explanation why
> this is a good idea regardless, and how this is almost a reset control.
>
> I have read the linked discussion, and I'm not sure I understand all
> of it, so please correct me if I'm wrong: There is some other way to
> force the GDSC into a state that will eventually cause a GPU reset, and
> this is just the remaining part to make sure that the workaround dance
> is finished?
>
> If so, it should be explained that this depends on something else to
> actually indirectly trigger the reset, and where this happens.
Let me clarify a bit. In Qcom gpu subsystem, power collapse is the only
way to properly reset the cx domain. Power collapse is a bit complex
here because multiple subsystems/drivers can keep a vote on the
regulator which blocks power collapse. So we remove the vote from gpu
driver and poll (with a reasonable timeout obviously) until everyone
removes their vote and gdsc collapses.
I suppose generally a reset implementation would look like this:
reset {
Step 1: Trigger a reset pulse
Step 2: Wait/poll for reset to complete
}
We skip step1 because we don't have a way to force it during gpu reset.
Instead of that, we just remove the gdsc vote from the gpu driver. So
all that is left to do here is step 2.
Like you suggested, I think it would be better if we document this in
patch 4.
Thanks for the review. Please let me know if you have any feedback.
-Akhil.
>
> regards
> Philipp
Powered by blists - more mailing lists