| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMRc=McXoBqm-SBJTWdULZGep98V5-z3O9Dygkd07H=Z2k0-HA@mail.gmail.com>
Date: Thu, 1 Sep 2022 09:08:26 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: "jay.xu@...k-chips.com" <jay.xu@...k-chips.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
"linus.walleij" <linus.walleij@...aro.org>,
linux-gpio <linux-gpio@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Heiko Stübner <heiko@...ech.de>
Subject: Re: Re: [PATCH v2 1/1] gpio: rockchip: Switch to use fwnode instead
of of_node
On Thu, Sep 1, 2022 at 3:47 AM jay.xu@...k-chips.com
<jay.xu@...k-chips.com> wrote:
>
> Hi
>
> --------------
> jay.xu@...k-chips.com
> >On Wed, Aug 31, 2022 at 3:45 PM Andy Shevchenko
> ><andriy.shevchenko@...ux.intel.com> wrote:
> >>
> >> GPIO library now accepts fwnode as a firmware node, so
> >> switch the driver to use it.
> >>
> >> Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> >> ---
> >> v2: fixed compilation errors (LKP), replace some OF calls (Bart)
> >> drivers/gpio/gpio-rockchip.c | 38 +++++++++++-------------------
> >> drivers/pinctrl/pinctrl-rockchip.h | 2 --
> >> 2 files changed, 14 insertions(+), 26 deletions(-)
> >>
> >> diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
> >> index bb50335239ac..e8fa99fd4c80 100644
> >> --- a/drivers/gpio/gpio-rockchip.c
> >> +++ b/drivers/gpio/gpio-rockchip.c
> >> @@ -14,12 +14,11 @@
> >> #include <linux/init.h>
> >> #include <linux/interrupt.h>
> >> #include <linux/io.h>
> >> +#include <linux/mod_devicetable.h>
> >> #include <linux/module.h>
> >> #include <linux/of.h>
> >> -#include <linux/of_address.h>
> >> -#include <linux/of_device.h>
> >> -#include <linux/of_irq.h>
> >> #include <linux/pinctrl/pinconf-generic.h>
> >> +#include <linux/property.h>
> >> #include <linux/regmap.h>
> >>
> >> #include "../pinctrl/core.h"
> >> @@ -518,7 +517,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
> >> struct irq_chip_generic *gc;
> >> int ret;
> >>
> >> - bank->domain = irq_domain_add_linear(bank->of_node, 32,
> >> + bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev), 32,
> >> &irq_generic_chip_ops, NULL);
> >> if (!bank->domain) {
> >> dev_warn(bank->dev, "could not init irq domain for bank %s\n",
> >> @@ -606,14 +605,10 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
> >> * files which don't set the "gpio-ranges" property or systems that
> >> * utilize ACPI the driver has to call gpiochip_add_pin_range().
> >> */
> >> - if (!of_property_read_bool(bank->of_node, "gpio-ranges")) {
> >> - struct device_node *pctlnp = of_get_parent(bank->of_node);
> >> + if (!device_property_read_bool(bank->dev, "gpio-ranges")) {
> >> struct pinctrl_dev *pctldev = NULL;
> >>
> >> - if (!pctlnp)
> >> - return -ENODATA;
> >> -
> >> - pctldev = of_pinctrl_get(pctlnp);
> >> + pctldev = pinctrl_get(bank->dev->parent);
> >> if (!pctldev)
> >> return -ENODEV;
> >>
> >> @@ -641,23 +636,20 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
> >>
> >> static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
> >> {
> >> + struct platform_device *pdev = to_platform_device(bank->dev);
> >> + struct device_node *np = bank->dev->of_node;
> >> struct resource res;
> >> int id = 0;
> >>
> >> - if (of_address_to_resource(bank->of_node, 0, &res)) {
> >> - dev_err(bank->dev, "cannot find IO resource for bank\n");
> >> - return -ENOENT;
> >> - }
> >> -
> >> - bank->reg_base = devm_ioremap_resource(bank->dev, &res);
> >> + bank->reg_base = devm_platform_ioremap_resource(pdev, 0);
> >> if (IS_ERR(bank->reg_base))
> >> return PTR_ERR(bank->reg_base);
> >>
> >> - bank->irq = irq_of_parse_and_map(bank->of_node, 0);
> >> + bank->irq = platform_get_irq(pdev, 0);
> >> if (!bank->irq)
> >> return -EINVAL;
> >>
> >> - bank->clk = of_clk_get(bank->of_node, 0);
> >> + bank->clk = of_clk_get(np, 0);
> >
> >Why did you stop above? Why not regular clk_get here?
> >
> >> if (IS_ERR(bank->clk))
> >> return PTR_ERR(bank->clk);
> >>
> >> @@ -668,7 +660,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
> >> if (id == GPIO_TYPE_V2 || id == GPIO_TYPE_V2_1) {
> >> bank->gpio_regs = &gpio_regs_v2;
> >> bank->gpio_type = GPIO_TYPE_V2;
> >> - bank->db_clk = of_clk_get(bank->of_node, 1);
> >> + bank->db_clk = of_clk_get(np, 1);
> >
> >Ah, the clocks don't have names in DT? That's unfortunate...
>
> The patch add 'clock-names' property for gpio dt node, after that, the driver can change to
> devm_clk_get(dev, "bus");
> devm_clk_get(dev, "db");
>
We can't unfortunately, we need to remain compatible with existing DTs.
Bart
> https://patchwork.kernel.org/project/linux-rockchip/patch/20220901013101.2634480-2-jay.xu@rock-chips.com
>
> >
> >Bart
> >
> >> if (IS_ERR(bank->db_clk)) {
> >> dev_err(bank->dev, "cannot find debounce clk\n");
> >> clk_disable_unprepare(bank->clk);
> >> @@ -705,17 +697,16 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
> >> {
> >> struct device *dev = &pdev->dev;
> >> struct device_node *np = dev->of_node;
> >> - struct device_node *pctlnp = of_get_parent(np);
> >> struct pinctrl_dev *pctldev = NULL;
> >> struct rockchip_pin_bank *bank = NULL;
> >> struct rockchip_pin_deferred *cfg;
> >> static int gpio;
> >> int id, ret;
> >>
> >> - if (!np || !pctlnp)
> >> + if (!dev->parent)
> >> return -ENODEV;
> >>
> >> - pctldev = of_pinctrl_get(pctlnp);
> >> + pctldev = pinctrl_get(dev->parent);
> >> if (!pctldev)
> >> return -EPROBE_DEFER;
> >>
> >> @@ -728,7 +719,6 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
> >> return -EINVAL;
> >>
> >> bank->dev = dev;
> >> - bank->of_node = np;
> >>
> >> raw_spin_lock_init(&bank->slock);
> >>
> >> @@ -776,7 +766,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
> >> mutex_unlock(&bank->deferred_lock);
> >>
> >> platform_set_drvdata(pdev, bank);
> >> - dev_info(dev, "probed %pOF\n", np);
> >> + dev_info(dev, "probed %pfw\n", dev_fwnode(dev));
> >>
> >> return 0;
> >> }
> >> diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h
> >> index 4759f336941e..37a0501bcc03 100644
> >> --- a/drivers/pinctrl/pinctrl-rockchip.h
> >> +++ b/drivers/pinctrl/pinctrl-rockchip.h
> >> @@ -299,7 +299,6 @@ struct rockchip_drv {
> >> * @drv: array describing the 4 drive strength sources of the bank
> >> * @pull_type: array describing the 4 pull type sources of the bank
> >> * @valid: is all necessary information present
> >> - * @of_node: dt node of this bank
> >> * @drvdata: common pinctrl basedata
> >> * @domain: irqdomain of the gpio bank
> >> * @gpio_chip: gpiolib chip
> >> @@ -327,7 +326,6 @@ struct rockchip_pin_bank {
> >> struct rockchip_drv drv[4];
> >> enum rockchip_pin_pull_type pull_type[4];
> >> bool valid;
> >> - struct device_node *of_node;
> >> struct rockchip_pinctrl *drvdata;
> >> struct irq_domain *domain;
> >> struct gpio_chip gpio_chip;
> >> --
> >> 2.35.1
> >>
Powered by blists - more mailing lists