| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHUa44Fmr=vDLbST5qwTDOtSZJq4RYqO+Y4Pij64VeBU-0BgrQ@mail.gmail.com>
Date: Thu, 1 Sep 2022 10:43:58 +0200
From: Jens Wiklander <jens.wiklander@...aro.org>
To: Sudeep Holla <sudeep.holla@....com>
Cc: linux-kernel@...r.kernel.org, op-tee@...ts.trustedfirmware.org,
Marc Bonnici <marc.bonnici@....com>,
Achin Gupta <achin.gupta@....com>,
Valentin Laurent <valentin.laurent@...stonic.com>,
Lukas Hanel <lukas.hanel@...stonic.com>,
Coboy Chen <coboy.chen@...iatek.com>
Subject: Re: [PATCH 7/9] firmware: arm_ffa: Add v1.1 get_partition_info support
On Tue, Aug 30, 2022 at 12:07 PM Sudeep Holla <sudeep.holla@....com> wrote:
>
> FF-A v1.1 adds support to discovery the UUIDs of the partitions that was
> missing in v1.0 and which the driver workarounds by using UUIDs supplied
> by the ffa_drivers.
>
> Add the v1.1 get_partition_info support and disable the workaround if
> the detected FF-A version is greater than v1.0.
>
> Signed-off-by: Sudeep Holla <sudeep.holla@....com>
> ---
> drivers/firmware/arm_ffa/driver.c | 39 ++++++++++++++++++++++++-------
> include/linux/arm_ffa.h | 1 +
> 2 files changed, 32 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c
> index 5c8484b05c50..6822241168d6 100644
> --- a/drivers/firmware/arm_ffa/driver.c
> +++ b/drivers/firmware/arm_ffa/driver.c
> @@ -264,18 +264,24 @@ static int ffa_rxtx_unmap(u16 vm_id)
> return 0;
> }
>
> +#define PARTITION_INFO_GET_RETURN_COUNT_ONLY BIT(0)
> +
> /* buffer must be sizeof(struct ffa_partition_info) * num_partitions */
> static int
> __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
> struct ffa_partition_info *buffer, int num_partitions)
> {
> - int count;
> + int idx, count, flags = 0, size;
> ffa_value_t partition_info;
>
> + if (!buffer || !num_partitions) /* Just get the count for now */
> + flags = PARTITION_INFO_GET_RETURN_COUNT_ONLY;
> +
> mutex_lock(&drv_info->rx_lock);
> invoke_ffa_fn((ffa_value_t){
> .a0 = FFA_PARTITION_INFO_GET,
> .a1 = uuid0, .a2 = uuid1, .a3 = uuid2, .a4 = uuid3,
> + .a5 = flags,
> }, &partition_info);
>
> if (partition_info.a0 == FFA_ERROR) {
> @@ -285,8 +291,15 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
>
> count = partition_info.a2;
>
> + if (drv_info->version > FFA_VERSION_1_0)
> + size = partition_info.a3;
What happens if this value is larger than sizeof(struct ffa_partition_info)?
> + else
> + size = 8; /* FFA_VERSION_1_0 lacks size in the response */
> +
> if (buffer && count <= num_partitions)
> - memcpy(buffer, drv_info->rx_buffer, sizeof(*buffer) * count);
> + for (idx = 0; idx < count; idx++)
> + memcpy(buffer + idx, drv_info->rx_buffer + idx * size,
> + size);
>
> ffa_rx_release();
>
> @@ -678,6 +691,14 @@ void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
> int count, idx;
> struct ffa_partition_info *pbuf, *tpbuf;
>
> + /*
> + * FF-A v1.1 provides UUID for each partition as part of the discovery
> + * API, the discovered UUID must be populated in the device's UUID and
> + * there is no need to copy the same from the driver table.
> + */
> + if (drv_info->version > FFA_VERSION_1_0)
> + return;
> +
> count = ffa_partition_probe(uuid, &pbuf);
> if (count <= 0)
> return;
> @@ -691,6 +712,7 @@ void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
> static void ffa_setup_partitions(void)
> {
> int count, idx;
> + uuid_t uuid;
> struct ffa_device *ffa_dev;
> struct ffa_partition_info *pbuf, *tpbuf;
>
> @@ -701,14 +723,15 @@ static void ffa_setup_partitions(void)
> }
>
> for (idx = 0, tpbuf = pbuf; idx < count; idx++, tpbuf++) {
> - /* Note that the &uuid_null parameter will require
> + import_uuid(&uuid, (u8 *)tpbuf->uuid);
> +
> + /* Note that the UUID will be uuid_null and that will require
Note that if the UUID is uuid_null, that will require ...
Cheers,
Jen s
> * ffa_device_match() to find the UUID of this partition id
> - * with help of ffa_device_match_uuid(). Once the FF-A spec
> - * is updated to provide correct UUID here for each partition
> - * as part of the discovery API, we need to pass the
> - * discovered UUID here instead.
> + * with help of ffa_device_match_uuid(). FF-A v1.1 and above
> + * provides UUID here for each partition as part of the
> + * discovery API and the same is passed.
> */
> - ffa_dev = ffa_device_register(&uuid_null, tpbuf->id, &ffa_ops);
> + ffa_dev = ffa_device_register(&uuid, tpbuf->id, &ffa_ops);
> if (!ffa_dev) {
> pr_err("%s: failed to register partition ID 0x%x\n",
> __func__, tpbuf->id);
> diff --git a/include/linux/arm_ffa.h b/include/linux/arm_ffa.h
> index eafab07c9f58..b40afa7933dc 100644
> --- a/include/linux/arm_ffa.h
> +++ b/include/linux/arm_ffa.h
> @@ -107,6 +107,7 @@ struct ffa_partition_info {
> /* partition can send and receive indirect messages. */
> #define FFA_PARTITION_INDIRECT_MSG BIT(2)
> u32 properties;
> + u32 uuid[4];
> };
>
> /* For use with FFA_MSG_SEND_DIRECT_{REQ,RESP} which pass data via registers */
> --
> 2.37.2
>
Powered by blists - more mailing lists