lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AS8PR04MB86760623F932DE8EF23AA5718C7B9@AS8PR04MB8676.eurprd04.prod.outlook.com>
Date:   Thu, 1 Sep 2022 01:28:11 +0000
From:   Hongxing Zhu <hongxing.zhu@....com>
To:     Lucas Stach <l.stach@...gutronix.de>,
        "p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
        "bhelgaas@...gle.com" <bhelgaas@...gle.com>,
        "lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
        "robh@...nel.org" <robh@...nel.org>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "vkoul@...nel.org" <vkoul@...nel.org>,
        "alexander.stein@...tq-group.com" <alexander.stein@...tq-group.com>,
        "marex@...x.de" <marex@...x.de>,
        "richard.leitner@...ux.dev" <richard.leitner@...ux.dev>
CC:     "linux-phy@...ts.infradead.org" <linux-phy@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY
 support

> -----Original Message-----
> From: Lucas Stach <l.stach@...gutronix.de>
> Sent: 2022年8月31日 16:34
> To: Hongxing Zhu <hongxing.zhu@....com>; p.zabel@...gutronix.de;
> bhelgaas@...gle.com; lorenzo.pieralisi@....com; robh@...nel.org;
> shawnguo@...nel.org; vkoul@...nel.org; alexander.stein@...tq-group.com;
> marex@...x.de; richard.leitner@...ux.dev
> Cc: linux-phy@...ts.infradead.org; devicetree@...r.kernel.org;
> linux-pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> linux-kernel@...r.kernel.org; kernel@...gutronix.de; dl-linux-imx
> <linux-imx@....com>
> Subject: Re: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY
> support
> 
> Am Mittwoch, dem 31.08.2022 um 06:16 +0000 schrieb Hongxing Zhu:
> > > -----Original Message-----
> > > From: Lucas Stach <l.stach@...gutronix.de>
> > > Sent: 2022年8月30日 21:07
> > > To: Hongxing Zhu <hongxing.zhu@....com>; p.zabel@...gutronix.de;
> > > bhelgaas@...gle.com; lorenzo.pieralisi@....com; robh@...nel.org;
> > > shawnguo@...nel.org; vkoul@...nel.org;
> > > alexander.stein@...tq-group.com; marex@...x.de;
> > > richard.leitner@...ux.dev
> > > Cc: linux-phy@...ts.infradead.org; devicetree@...r.kernel.org;
> > > linux-pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> > > linux-kernel@...r.kernel.org; kernel@...gutronix.de; dl-linux-imx
> > > <linux-imx@....com>
> > > Subject: Re: [PATCH v5 6/7] phy: freescale: imx8m-pcie: Add iMX8MP
> > > PCIe PHY support
> > >
> > > Am Dienstag, dem 30.08.2022 um 15:46 +0800 schrieb Richard Zhu:
> > > > Add i.MX8MP PCIe PHY support.
> > > >
> > > > Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> > > > Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
> > > > Tested-by: Marek Vasut <marex@...x.de>
> > > > Tested-by: Richard Leitner <richard.leitner@...data.com>
> > > > Tested-by: Alexander Stein <alexander.stein@...tq-group.com>
> > > > ---
> > > >  drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 137
> > > > +++++++++++++--------
> > > >  1 file changed, 89 insertions(+), 48 deletions(-)
> > > >
> > > > diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> > > > b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> > > > index ad7d2edfc414..c76e3a1a5f51 100644
> > > > --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> > > > +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> > > > @@ -11,6 +11,9 @@
> > > >  #include <linux/mfd/syscon.h>
> > > >  #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
> > > >  #include <linux/module.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/of_device.h>
> > > >  #include <linux/phy/phy.h>
> > > >  #include <linux/platform_device.h>
> > > >  #include <linux/regmap.h>
> > > > @@ -31,12 +34,10 @@
> > > >  #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
> > > >  #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
> > > >  #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
> > > > -#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
> > > > -#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
> > > > +#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
> > > > +#define  ANA_PLL_DONE			0x3
> > > >  #define PCIE_PHY_TRSV_REG5		0x414
> > > > -#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
> > > >  #define PCIE_PHY_TRSV_REG6		0x418
> > > > -#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
> > > >
> > > >  #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
> > > >  #define IMX8MM_GPR_PCIE_REF_CLK_PLL
> > > 	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
> > > > @@ -47,16 +48,23 @@
> > > >  #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
> > > >  #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
> > > >
> > > > +enum imx8_pcie_phy_type {
> > > > +	IMX8MM,
> > > > +	IMX8MP,
> > > > +};
> > > > +
> > > >  struct imx8_pcie_phy {
> > > >  	void __iomem		*base;
> > > >  	struct clk		*clk;
> > > >  	struct phy		*phy;
> > > >  	struct regmap		*iomuxc_gpr;
> > > >  	struct reset_control	*reset;
> > > > +	struct reset_control	*perst;
> > > >  	u32			refclk_pad_mode;
> > > >  	u32			tx_deemph_gen1;
> > > >  	u32			tx_deemph_gen2;
> > > >  	bool			clkreq_unused;
> > > > +	enum imx8_pcie_phy_type	variant;
> > > >  };
> > > >
> > > >  static int imx8_pcie_phy_init(struct phy *phy) @@ -68,31 +76,20
> > > > @@ static int imx8_pcie_phy_init(struct phy *phy)
> > > >  	reset_control_assert(imx8_phy->reset);
> > > >
> > > >  	pad_mode = imx8_phy->refclk_pad_mode;
> > > > -	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't
> > > > hooked */
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> > > > -			   imx8_phy->clkreq_unused ?
> > > > -			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_AUX_EN,
> > > > -			   IMX8MM_GPR_PCIE_AUX_EN);
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_SSC_EN, 0);
> > > > -
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
> > > > -			   pad_mode ==
> > > > IMX8_PCIE_REFCLK_PAD_INPUT ?
> > > > -			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
> > > > -			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
> > > > -	usleep_range(100, 200);
> > > > -
> > > > -	/* Do the PHY common block reset */
> > > > -	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > -			   IMX8MM_GPR_PCIE_CMN_RST,
> > > > -			   IMX8MM_GPR_PCIE_CMN_RST);
> > > > -	usleep_range(200, 500);
> > > > +	switch (imx8_phy->variant) {
> > > > +	case IMX8MM:
> > > > +		/* Tune PHY de-emphasis setting to pass PCIe
> > > > compliance. */
> > > > +		if (imx8_phy->tx_deemph_gen1)
> > > > +			writel(imx8_phy->tx_deemph_gen1,
> > > > +			       imx8_phy->base +
> > > > PCIE_PHY_TRSV_REG5);
> > > > +		if (imx8_phy->tx_deemph_gen2)
> > > > +			writel(imx8_phy->tx_deemph_gen2,
> > > > +			       imx8_phy->base +
> > > > PCIE_PHY_TRSV_REG6);
> > > > +		break;
> > > > +	case IMX8MP:
> > > > +		reset_control_assert(imx8_phy->perst);
> > > > +		break;
> > > > +	}
> > > >
> > > >  	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
> > > >  	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) { @@ -
> > > > 120,20
> > > +117,44 @@
> > > > static int imx8_pcie_phy_init(struct phy *phy)
> > > >  		       imx8_phy->base +
> > > > IMX8MM_PCIE_PHY_CMN_REG065);
> > > >  	}
> > > >
> > > > -	/* Tune PHY de-emphasis setting to pass PCIe compliance.
> > > > */
> > > > -	if (imx8_phy->tx_deemph_gen1)
> > > > -		writel(imx8_phy->tx_deemph_gen1,
> > > > -		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
> > > > -	if (imx8_phy->tx_deemph_gen2)
> > > > -		writel(imx8_phy->tx_deemph_gen2,
> > > > -		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
> > > > +	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't
> > > > hooked */
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> > > > +			   imx8_phy->clkreq_unused ?
> > > > +			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_AUX_EN,
> > > > +			   IMX8MM_GPR_PCIE_AUX_EN);
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_SSC_EN, 0);
> > > > +
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
> > > > +			   pad_mode ==
> > > > IMX8_PCIE_REFCLK_PAD_INPUT ?
> > > > +			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
> > > > +			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
> > > > +	usleep_range(100, 200);
> > > > +
> > > > +	/* Do the PHY common block reset */
> > > > +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> > > > +			   IMX8MM_GPR_PCIE_CMN_RST,
> > > > +			   IMX8MM_GPR_PCIE_CMN_RST);
> > > >
> > > > -	reset_control_deassert(imx8_phy->reset);
> > > > +	switch (imx8_phy->variant) {
> > > > +	case IMX8MP:
> > > > +		reset_control_deassert(imx8_phy->perst);
> > > > +		fallthrough;
> > > > +	case IMX8MM:
> > > > +		reset_control_deassert(imx8_phy->reset);
> > > > +		usleep_range(200, 500);
> > > > +		break;
> > > > +	}
> > > >
> > > >  	/* Polling to check the phy is ready or not. */
> > > > -	ret = readl_poll_timeout(imx8_phy->base +
> > > IMX8MM_PCIE_PHY_CMN_REG75,
> > > > -				 val, val ==
> > > > PCIE_PHY_CMN_REG75_PLL_DONE,
> > > > -				 10, 20000);
> > > > +	ret = readl_poll_timeout(imx8_phy->base +
> > > IMX8MM_PCIE_PHY_CMN_REG075,
> > > > +				 val, val == ANA_PLL_DONE, 10,
> > > > 20000);
> > > >  	return ret;
> > > >  }
> > > >
> > > > @@ -160,6 +181,13 @@ static const struct phy_ops imx8_pcie_phy_ops
> > > > = {
> > > >  	.owner		= THIS_MODULE,
> > > >  };
> > > >
> > > > +static const struct of_device_id imx8_pcie_phy_of_match[] = {
> > > > +	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void
> > > > *)IMX8MM},
> > > > +	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void
> > > > *)IMX8MP},
> > > > +	{ },
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
> > > > +
> > > >  static int imx8_pcie_phy_probe(struct platform_device *pdev)  {
> > > >  	struct phy_provider *phy_provider; @@ -172,6 +200,9 @@ static
> > > > int imx8_pcie_phy_probe(struct
> > > platform_device *pdev)
> > > >  	if (!imx8_phy)
> > > >  		return -ENOMEM;
> > > >
> > > > +	imx8_phy->variant =
> > > > +		(enum
> > > > imx8_pcie_phy_type)of_device_get_match_data(dev);
> > > > +
> > > >  	/* get PHY refclk pad mode */
> > > >  	of_property_read_u32(np, "fsl,refclk-pad-mode",
> > > >  			     &imx8_phy->refclk_pad_mode); @@ -196,8 +227,16
> @@ static
> > > > int imx8_pcie_phy_probe(struct
> > > platform_device *pdev)
> > > >  	}
> > > >
> > > >  	/* Grab GPR config register range */
> > > > -	imx8_phy->iomuxc_gpr =
> > > > -		 syscon_regmap_lookup_by_compatible("fsl,imx6q-
> > > > iomuxc-gpr");
> > > > +	switch (imx8_phy->variant) {
> > > > +	case IMX8MM:
> > > > +		imx8_phy->iomuxc_gpr =
> > > > +
> > > syscon_regmap_lookup_by_compatible("fsl,imx8mm-iomuxc-gpr");
> > > > +		break;
> > > > +	case IMX8MP:
> > > > +		imx8_phy->iomuxc_gpr =
> > > > +
> > > syscon_regmap_lookup_by_compatible("fsl,imx8mp-iomuxc-gpr");
> > > > +		break;
> > > > +	}
> > >
> > > Oh, I had a real phandle in DT in mind for this, but I see how this
> > > would be hard to introduce in a backward compatible manner for the
> > > 8MM.
> > > At least this way it is fully contained in the driver and doesn't
> > > leak into DT compatibles.
> > >
> > > Maybe we could make this a little nicer by just having an const
> > > array of iomux syscon compatibles indexed by imx8_phy->variant, to
> > > avoid the switch and the resulting code (almost-)duplication.
> > >
> > Hi Lucas:
> > Thanks for your comments.
> > Do you mean a drvdata struct indexed by variant, and contains the
> > const array of iomux syscon compatible like below?
> >
> > +static const struct imx8_pcie_phy_drvdata drvdata[] = {
> > +       [IMX8MM] = {
> > +               .variant = IMX8MM,
> > +               .gpr = "fsl,imx8mm-iomuxc-gpr",
> > +       },
> > +
> > +       [IMX8MP] = {
> > +               .variant = IMX8MP,
> > +               .gpr = "fsl,imx8mp-iomuxc-gpr",
> > +       },
> > +};
> > +
> >
> > Then, we can get the drvdata, and find the according gpr syscon regmap
> > below.
> >
> > +       imx8_phy->drvdata = of_device_get_match_data(dev);
> > ...
> > +       imx8_phy->iomuxc_gpr =
> > +                syscon_regmap_lookup_by_compatible(imx8_phy-
> > >drvdata->gpr);
> >
> I had a simple array of GPR compatible strings in mind, so we could lookup the
> compatible from the variant. But I think putting it directly in drvdata, like done
> in your suggestion above, looks even better.
> 
> > If yes, I would do the changes, and issue the v6 later.
> 
> Yep, please change as suggested above. Same comment applies to the next
> patch "PCI: imx6: Add iMX8MP PCIe support".
> 
> Also in both patches the dot between i and MX in i.MX8MP is missing in the
> patch description subject line.

Okay, thanks.

Best Regards
Richard Zhu
> 
> Regards,
> Lucas

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ