linux-kernel - [PATCH v1 13/17] pinctrl: cy8c95x0: Make use of device properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  2 Sep 2022 21:26:46 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Patrick Rudolph <patrick.rudolph@...ements.com>,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v1 13/17] pinctrl: cy8c95x0: Make use of device properties

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/pinctrl/Kconfig            |  2 +-
 drivers/pinctrl/pinctrl-cy8c95x0.c | 16 +++++++++-------
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index fc0e529e633f..c09562fbb1b7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -137,7 +137,7 @@ config PINCTRL_BM1880
 
 config PINCTRL_CY8C95X0
 	tristate "Cypress CY8C95X0 I2C pinctrl and GPIO driver"
-	depends on I2C && OF
+	depends on I2C
 	select GPIOLIB
 	select GPIOLIB_IRQCHIP
 	select PINMUX
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index ea81b5ae27a6..699da63d9c39 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -13,15 +13,16 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
 
 /* Fast access registers */
 #define CY8C95X0_INPUT		0x00
@@ -1040,8 +1041,10 @@ static const struct pinctrl_ops cy8c95x0_pinctrl_ops = {
 	.get_groups_count = cy8c95x0_pinctrl_get_groups_count,
 	.get_group_name = cy8c95x0_pinctrl_get_group_name,
 	.get_group_pins = cy8c95x0_pinctrl_get_group_pins,
+#ifdef CONFIG_OF
 	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
 	.dt_free_map = pinconf_generic_dt_free_map,
+#endif
 	.pin_dbg_show = cy8c95x0_pin_dbg_show,
 };
 
@@ -1245,9 +1248,8 @@ static int cy8c95x0_probe(struct i2c_client *client)
 	chip->dev = &client->dev;
 
 	/* Set the device type */
-	if (client->dev.of_node)
-		chip->driver_data = (unsigned long)of_device_get_match_data(&client->dev);
-	else
+	chip->driver_data = (unsigned long)device_get_match_data(&client->dev);
+	if (!chip->driver_data)
 		chip->driver_data = i2c_match_id(cy8c95x0_id, client)->driver_data;
 
 	if (!chip->driver_data)
-- 
2.35.1