linux-kernel - Re: amd iommu configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <8a8822a1-327d-84b9-549a-f11009a15b4f@infradead.org>
Date:   Fri, 2 Sep 2022 15:10:17 -0700
From:   Randy Dunlap <rdunlap@...radead.org>
To:     Steven J Abner <pheonix.sja@....net>, linux-kernel@...r.kernel.org
Subject: Re: amd iommu configuration



On 9/1/22 11:36, Steven J Abner wrote:
> Hi
> Building a kernel tailored for AMD 2400g on ASRock B450 using 5.18.12 as base.
> I stumbled across an odd situation and which lacked Kconfig info and lead to oddity.
> /drivers/iommu/amd/Kconfig states 'config AMD_IOMMU_V2' is 'tristate' but unlike many
> other tristate configures doesn't mention that module name is 'iommu_v2.ko' and loading should be done by adding to modules-load.d.
> 
> The oddity is that by loading as module is as follows (differences):
> 
> builtin iommu_v2 version dmesg:
> amdgpu: HMM registered 2048MB device memory
> amdgpu: Topology: Add APU node [0x0:0x0]
> amdgpu: Topology: Add APU node [0x15dd:0x1002]
> AMD-Vi: AMD IOMMUv2 loaded and initialized
> kfd kfd: amdgpu: added device 1002:15dd
> kfd kfd: amdgpu: Allocated 3969056 bytes on gart
> memmap_init_zone_device initialised 524288 pages in 0ms
> 
> module not loaded due to missing iommu.conf dmesg:
> amdgpu: CRAT table disabled by module option
> amdgpu: Topology: Add CPU node
> amdgpu: Virtual CRAT table created for CPU
> kfd kfd: amdgpu: GC IP 090100 not supported in kfd
> 
> module load through iommu.conf dmesg:
> amdgpu: CRAT table disabled by module option
> amdgpu: Topology: Add CPU node
> amdgpu: Virtual CRAT table created for CPU
> AMD-Vi: AMD IOMMUv2 loaded and initialized
> kfd kfd: amdgpu: GC IP 090100 not supported in kfd
> 
> Note, only difference on witk/without iommu.conf is:
> AMD-Vi: AMD IOMMUv2 loaded and initialized
> 
> So does this mean missing features by not having builtin?
> If not, should Kconfig have hint about module and loading?
> 
> Steve
> 
> I wish to be personally CC'ed the answers/comments posted to the list
> in response to my posting, please:) Not a list member.

Hi,
Please try these email addresses:

AMD IOMMU (AMD-VI)
M:	Joerg Roedel <joro@...tes.org>
R:	Suravee Suthikulpanit <suravee.suthikulpanit@....com>
L:	iommu@...ts.linux.dev

Thanks.

-- 
~Randy