| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b4add7855fe7154c65728efe22461c0fbc6937bb.camel@pengutronix.de>
Date: Fri, 02 Sep 2022 10:41:41 +0200
From: Lucas Stach <l.stach@...gutronix.de>
To: Richard Zhu <hongxing.zhu@....com>, p.zabel@...gutronix.de,
bhelgaas@...gle.com, lorenzo.pieralisi@....com, robh@...nel.org,
shawnguo@...nel.org, vkoul@...nel.org,
alexander.stein@...tq-group.com, marex@...x.de,
richard.leitner@...ux.dev
Cc: linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, kernel@...gutronix.de,
linux-imx@....com
Subject: Re: [PATCH v6 7/7] PCI: imx6: Add i.MX8MP PCIe support
Am Donnerstag, dem 01.09.2022 um 12:02 +0800 schrieb Richard Zhu:
> Add i.MX8MP PCIe support.
> To avoid codes duplication when find the syscon regmap, add the iomux
> gpr syscon compatible into drvdata.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> Tested-by: Marek Vasut <marex@...x.de>
> Tested-by: Richard Leitner <richard.leitner@...data.com>
> Tested-by: Alexander Stein <alexander.stein@...tq-group.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 27 +++++++++++++++++++++++++--
> 1 file changed, 25 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6e5debdbc55b..3018f9d1c1b8 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -51,6 +51,7 @@ enum imx6_pcie_variants {
> IMX7D,
> IMX8MQ,
> IMX8MM,
> + IMX8MP,
> };
>
> #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
> @@ -61,6 +62,7 @@ struct imx6_pcie_drvdata {
> enum imx6_pcie_variants variant;
> u32 flags;
> int dbi_length;
> + char gpr[128];
Same comment as with the PHY patch:
const char *gpr;
Otherwise looks good.
Regards,
Lucas
> };
>
> struct imx6_pcie {
> @@ -150,7 +152,8 @@ struct imx6_pcie {
> static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> {
> WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
> - imx6_pcie->drvdata->variant != IMX8MM);
> + imx6_pcie->drvdata->variant != IMX8MM &&
> + imx6_pcie->drvdata->variant != IMX8MP);
> return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
> }
>
> @@ -301,6 +304,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> {
> switch (imx6_pcie->drvdata->variant) {
> case IMX8MM:
> + case IMX8MP:
> /*
> * The PHY initialization had been done in the PHY
> * driver, break here directly.
> @@ -558,6 +562,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> break;
> case IMX8MM:
> case IMX8MQ:
> + case IMX8MP:
> ret = clk_prepare_enable(imx6_pcie->pcie_aux);
> if (ret) {
> dev_err(dev, "unable to enable pcie_aux clock\n");
> @@ -602,6 +607,7 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
> break;
> case IMX8MM:
> case IMX8MQ:
> + case IMX8MP:
> clk_disable_unprepare(imx6_pcie->pcie_aux);
> break;
> default:
> @@ -669,6 +675,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> reset_control_assert(imx6_pcie->pciephy_reset);
> fallthrough;
> case IMX8MM:
> + case IMX8MP:
> reset_control_assert(imx6_pcie->apps_reset);
> break;
> case IMX6SX:
> @@ -744,6 +751,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> break;
> case IMX6Q: /* Nothing to do */
> case IMX8MM:
> + case IMX8MP:
> break;
> }
>
> @@ -793,6 +801,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
> case IMX7D:
> case IMX8MQ:
> case IMX8MM:
> + case IMX8MP:
> reset_control_deassert(imx6_pcie->apps_reset);
> break;
> }
> @@ -812,6 +821,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
> case IMX7D:
> case IMX8MQ:
> case IMX8MM:
> + case IMX8MP:
> reset_control_assert(imx6_pcie->apps_reset);
> break;
> }
> @@ -1179,6 +1189,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> }
> break;
> case IMX8MM:
> + case IMX8MP:
> imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> if (IS_ERR(imx6_pcie->pcie_aux))
> return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
> @@ -1216,7 +1227,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>
> /* Grab GPR config register range */
> imx6_pcie->iomuxc_gpr =
> - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> + syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
> if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
> dev_err(dev, "unable to find iomuxc registers\n");
> return PTR_ERR(imx6_pcie->iomuxc_gpr);
> @@ -1295,12 +1306,14 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .flags = IMX6_PCIE_FLAG_IMX6_PHY |
> IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
> .dbi_length = 0x200,
> + .gpr = "fsl,imx6q-iomuxc-gpr",
> },
> [IMX6SX] = {
> .variant = IMX6SX,
> .flags = IMX6_PCIE_FLAG_IMX6_PHY |
> IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
> IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .gpr = "fsl,imx6q-iomuxc-gpr",
> },
> [IMX6QP] = {
> .variant = IMX6QP,
> @@ -1308,17 +1321,26 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
> IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> .dbi_length = 0x200,
> + .gpr = "fsl,imx6q-iomuxc-gpr",
> },
> [IMX7D] = {
> .variant = IMX7D,
> .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .gpr = "fsl,imx7d-iomuxc-gpr",
> },
> [IMX8MQ] = {
> .variant = IMX8MQ,
> + .gpr = "fsl,imx8mq-iomuxc-gpr",
> },
> [IMX8MM] = {
> .variant = IMX8MM,
> .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .gpr = "fsl,imx8mm-iomuxc-gpr",
> + },
> + [IMX8MP] = {
> + .variant = IMX8MP,
> + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> + .gpr = "fsl,imx8mp-iomuxc-gpr",
> },
> };
>
> @@ -1329,6 +1351,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
> { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
> { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
> + { .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
> {},
> };
>
Powered by blists - more mailing lists