lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1662109086-15881-3-git-send-email-hongxing.zhu@nxp.com>
Date:   Fri,  2 Sep 2022 16:58:01 +0800
From:   Richard Zhu <hongxing.zhu@....com>
To:     p.zabel@...gutronix.de, l.stach@...gutronix.de,
        bhelgaas@...gle.com, lorenzo.pieralisi@....com, robh@...nel.org,
        shawnguo@...nel.org, vkoul@...nel.org,
        alexander.stein@...tq-group.com, marex@...x.de,
        richard.leitner@...ux.dev
Cc:     linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, kernel@...gutronix.de,
        linux-imx@....com, Richard Zhu <hongxing.zhu@....com>
Subject: [PATCH v7 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support

Add i.MX8MP PCIe support.

Signed-off-by: Richard Zhu <hongxing.zhu@....com>
Tested-by: Marek Vasut <marex@...x.de>
Tested-by: Richard Leitner <richard.leitner@...data.com>
Tested-by: Alexander Stein <alexander.stein@...tq-group.com>
Reviewed-by: Lucas Stach <l.stach@...gutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 43 +++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index fe178b7d063c..21a4cc417c81 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1084,6 +1085,17 @@ media_blk_ctrl: blk-ctrl@...c0000 {
 				#power-domain-cells = <1>;
 			};
 
+			pcie_phy: pcie-phy@...00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			hsio_blk_ctrl: blk-ctrl@...10000 {
 				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
 				reg = <0x32f10000 0x24>;
@@ -1099,6 +1111,37 @@ hsio_blk_ctrl: blk-ctrl@...10000 {
 			};
 		};
 
+		pcie: pcie@...00000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				  <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
 		gpu3d: gpu@...00000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ