[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1662109086-15881-6-git-send-email-hongxing.zhu@nxp.com>
Date: Fri, 2 Sep 2022 16:58:04 +0800
From: Richard Zhu <hongxing.zhu@....com>
To: p.zabel@...gutronix.de, l.stach@...gutronix.de,
bhelgaas@...gle.com, lorenzo.pieralisi@....com, robh@...nel.org,
shawnguo@...nel.org, vkoul@...nel.org,
alexander.stein@...tq-group.com, marex@...x.de,
richard.leitner@...ux.dev
Cc: linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, kernel@...gutronix.de,
linux-imx@....com, Richard Zhu <hongxing.zhu@....com>
Subject: [PATCH v7 5/7] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
From: Lucas Stach <l.stach@...gutronix.de>
Dessert the PHY reset when powering up the domain and put it back
into reset when the domain is powered down.
Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
Signed-off-by: Richard Zhu <hongxing.zhu@....com>
---
drivers/soc/imx/imx8mp-blk-ctrl.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c
index 4ca2ede6871b..6c939d68ba9a 100644
--- a/drivers/soc/imx/imx8mp-blk-ctrl.c
+++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
@@ -18,6 +18,8 @@
#define GPR_REG0 0x0
#define PCIE_CLOCK_MODULE_EN BIT(0)
#define USB_CLOCK_MODULE_EN BIT(1)
+#define PCIE_PHY_APB_RST BIT(4)
+#define PCIE_PHY_INIT_RST BIT(5)
struct imx8mp_blk_ctrl_domain;
@@ -75,6 +77,10 @@ static void imx8mp_hsio_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
case IMX8MP_HSIOBLK_PD_PCIE:
regmap_set_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
break;
+ case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+ regmap_set_bits(bc->regmap, GPR_REG0,
+ PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+ break;
default:
break;
}
@@ -90,6 +96,10 @@ static void imx8mp_hsio_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
case IMX8MP_HSIOBLK_PD_PCIE:
regmap_clear_bits(bc->regmap, GPR_REG0, PCIE_CLOCK_MODULE_EN);
break;
+ case IMX8MP_HSIOBLK_PD_PCIE_PHY:
+ regmap_clear_bits(bc->regmap, GPR_REG0,
+ PCIE_PHY_APB_RST | PCIE_PHY_INIT_RST);
+ break;
default:
break;
}
--
2.25.1
Powered by blists - more mailing lists