| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YxOScT3/m0RaEhyG@yilunxu-OptiPlex-7050>
Date: Sun, 4 Sep 2022 01:44:17 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: Marco Pagani <marpagan@...hat.com>
Cc: "Manne, Nava kishore" <nava.kishore.manne@....com>,
"git (AMD-Xilinx)" <git@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"michal.simek@...inx.com" <michal.simek@...inx.com>,
"mdf@...nel.org" <mdf@...nel.org>,
"hao.wu@...el.com" <hao.wu@...el.com>,
"trix@...hat.com" <trix@...hat.com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"ronak.jain@...inx.com" <ronak.jain@...inx.com>,
"rajan.vaja@...inx.com" <rajan.vaja@...inx.com>,
"abhyuday.godhasara@...inx.com" <abhyuday.godhasara@...inx.com>,
"piyush.mehta@...inx.com" <piyush.mehta@...inx.com>,
"lakshmi.sai.krishna.potthuri@...inx.com"
<lakshmi.sai.krishna.potthuri@...inx.com>,
"harsha.harsha@...inx.com" <harsha.harsha@...inx.com>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>,
"nava.manne@...inx.com" <nava.manne@...inx.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-fpga@...r.kernel.org" <linux-fpga@...r.kernel.org>
Subject: Re: [PATCH 4/4] fpga: zynqmp: Add afi config driver
On 2022-09-01 at 11:53:29 +0200, Marco Pagani wrote:
> Hi Nava,
>
> On 2022-08-30 11:19, Manne, Nava kishore wrote:
> > Hi Yilun,
> >
> > Please find my response inline.
> >
> >> -----Original Message-----
> >> From: Xu Yilun <yilun.xu@...el.com>
> >> Sent: Saturday, August 27, 2022 5:56 PM
> >> To: Manne, Nava kishore <nava.kishore.manne@....com>
> >> Cc: git (AMD-Xilinx) <git@....com>; robh+dt@...nel.org;
> >> krzysztof.kozlowski+dt@...aro.org; michal.simek@...inx.com;
> >> mdf@...nel.org; hao.wu@...el.com; trix@...hat.com;
> >> p.zabel@...gutronix.de; gregkh@...uxfoundation.org;
> >> ronak.jain@...inx.com; rajan.vaja@...inx.com;
> >> abhyuday.godhasara@...inx.com; piyush.mehta@...inx.com;
> >> lakshmi.sai.krishna.potthuri@...inx.com; harsha.harsha@...inx.com;
> >> linus.walleij@...aro.org; nava.manne@...inx.com;
> >> devicetree@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> >> kernel@...r.kernel.org; linux-fpga@...r.kernel.org
> >> Subject: Re: [PATCH 4/4] fpga: zynqmp: Add afi config driver
> >>
> >> CAUTION: This message has originated from an External Source. Please use
> >> proper judgment and caution when opening attachments, clicking links, or
> >> responding to this email.
> >>
> >>
> >> On 2022-08-24 at 09:25:42 +0530, Nava kishore Manne wrote:
> >>> Add zynqmp AXI FIFO interface(AFI) config driver. This is useful for
> >>> the configuration of the PS-PL interface on Zynq US+ MPSoC platform.
> >>
> >> Please help illustrate how to use the device for FPGA reprogramming, why it
> >> should be implemented as an FPGA bridge.
> >>
> >> From the code I actually didn't see any operation that gates the fpga-region
> >> from other part of the machine.
> >>
> >
> > The Zynq UltraScale MPSoC family consists of a system-on-chip (SoC) style integrated processing system (PS)
> > and a Programmable Logic (PL) unit, providing an extensible and flexible SoC solution on a single die.
> > Xilinx Zynq US+ MPSoC connect the PS to the programmable logic (PL) through the AXI port.
> > This AXI port helps to establish the data path between the PS and PL (Here AXI Interface act as a Gating between PS and PL)
> > and this AXI port configuration vary from design to design. In-order to establish the proper communication path between
> > PS and PL (Full region), the AXI port data path should be configured with proper values priories to load the full region.
> >
> > Will update the description in v2.
>
> Are you implementing your AFI driver as a Bridge because you want to
> change the configuration of the AXI HP interfaces exported by the PS
> every time you reconfigure the full fabric?
>
> I understand the need to change the configuration of the PS-PL
> interface at each full reconfiguration to ensure that the parameters
> of the AXI ports exported by the PS (like the widths of data read
> and write channels) matches the configuration of the master AXI ports
> exported by the PL design. However, it seems to me that performing this
> configuration doesn't fit the role of the FPGA Bridge, whose sole
> responsibility should be gating the Region's interface during
> reconfiguration.
>
> I think this need could be addressed by adding a new component to the
> FPGA subsystem called "FPGA Adapter". The Adapter will be an optional
> component associated with a Region like a Bridge. It will be responsible
> for changing the configuration of its Region's static interface
> (or PS/HPS/DRAM interface for the full FPGA) to match the interface
> exported by the specific reconfigurable module (or full static design).
I saw the Documentation/driver_api/interconnect.rst, but didn't look deep
into it. For this AFI case, it sets the bus width, is it OK to use it?
Thanks,
Yilun
> Moreover, besides bus-level properties like address/data width and
> protocol conversion, the Adapter could also be used to configure
> system-level properties. For instance, the designer may use it to change
> the memory access policy for the specific reconfigurable module if it
> uses bus mastering.
>
> >
> >>>
> >>> Signed-off-by: Nava kishore Manne <nava.kishore.manne@....com>
> >>> ---
> >>> MAINTAINERS | 6 ++
> >>> drivers/fpga/Kconfig | 13 +++
> >>> drivers/fpga/Makefile | 1 +
> >>> drivers/fpga/zynqmp-afi.c | 211
> >>> ++++++++++++++++++++++++++++++++++++++
> >>> 4 files changed, 231 insertions(+)
> >>> create mode 100644 drivers/fpga/zynqmp-afi.c
> >>>
> >>> diff --git a/MAINTAINERS b/MAINTAINERS index
> >>> 20ffac651214..957e753e6406 100644
> >>> --- a/MAINTAINERS
> >>> +++ b/MAINTAINERS
> >>> @@ -8032,6 +8032,12 @@ F: Documentation/fpga/
> >>> F: drivers/fpga/
> >>> F: include/linux/fpga/
> >>>
> >>> +FPGA ZYNQMP PS-PL BRIDGE DRIVER
> >>> +M: Nava kishore Manne <nava.kishore.manne@....com>
> >>> +S: Supported
> >>> +F: Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> >>> +F: drivers/fpga/zynqmp-afi.c
> >>> +
> >>> INTEL MAX10 BMC SECURE UPDATES
> >>> M: Russ Weight <russell.h.weight@...el.com>
> >>> L: linux-fpga@...r.kernel.org
> >>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index
> >>> 6c416955da53..c08794d30fb5 100644
> >>> --- a/drivers/fpga/Kconfig
> >>> +++ b/drivers/fpga/Kconfig
> >>> @@ -130,6 +130,19 @@ config XILINX_PR_DECOUPLER
> >>> reconfiguration, preventing the system deadlock that can
> >>> occur if AXI transactions are interrupted by DFX.
> >>>
> >>> +config ZYNQMP_AFI
> >>> + tristate "Xilinx ZYNQMP AFI support"
> >>> + depends on FPGA_BRIDGE
> >>> + help
> >>> + Say Y to enable drivers to handle the PS-PL clocks configurations
> >>> + and PS-PL Bus-width. Xilinx Zynq US+ MPSoC connect the PS to the
> >>> + programmable logic (PL) through the AXI port. This AXI port helps
> >>> + to establish the data path between the PS and PL.
> >>> + In-order to establish the proper communication path between PS and
> >> PL,
> >>> + the AXI port data path should be configured with the proper Bus-
> >> width
> >>> + values and it will also handles the PS-PL reset signals to reset the
> >>> + PL domain.
> >>
> >> Same concern, please describe its relationship to FPGA reprogramming.
> >>
> >
> > Same as above.
> > Will update the description in v2.
> >
> >>> +
> >>> config FPGA_REGION
> >>> tristate "FPGA Region"
> >>> depends on FPGA_BRIDGE
> >>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index
> >>> 42ae8b58abce..94cfe60972db 100644
> >>> --- a/drivers/fpga/Makefile
> >>> +++ b/drivers/fpga/Makefile
> >>> @@ -31,6 +31,7 @@ obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
> >>> obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-
> >> fpga2sdram.o
> >>> obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
> >>> obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
> >>> +obj-$(CONFIG_ZYNQMP_AFI) += zynqmp-afi.o
> >>>
> >>> # High Level Interfaces
> >>> obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> >>> diff --git a/drivers/fpga/zynqmp-afi.c b/drivers/fpga/zynqmp-afi.c new
> >>> file mode 100644 index 000000000000..bc975d304039
> >>> --- /dev/null
> >>> +++ b/drivers/fpga/zynqmp-afi.c
> >>> @@ -0,0 +1,211 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * Copyright (C) 2022 Xilinx, Inc.
> >>> + */
> >>> +
> >>> +#include <linux/err.h>
> >>> +#include <linux/firmware/xlnx-zynqmp.h> #include
> >>> +<linux/fpga/fpga-bridge.h> #include <linux/io.h> #include
> >>> +<linux/module.h> #include <linux/of.h> #include
> >>> +<linux/platform_device.h> #include <linux/reset.h> #include
> >>> +<linux/slab.h>
> >>> +
> >>> +/* Registers and special values for doing register-based operations */
> >>> +#define AFI_RDCHAN_CTRL_OFFSET 0x00
> >>> +#define AFI_WRCHAN_CTRL_OFFSET 0x14
> >>> +#define AFI_BUSWIDTH_MASK BIT(0)
> >>> +
> >>> +/**
> >>> + * struct zynqmp_afi - AFI register description.
> >>> + * @dev: device that owns this.
> >>> + * @of_node: Device Tree overlay.
> >>> + * @resets: Pointer to the reset control for ps-pl resets.
> >>> + */
> >>> +struct zynqmp_afi {
> >>> + struct device *dev;
> >>> + struct device_node *of_node;
> >>> + struct reset_control *resets;
> >>> +};
> >>> +
> >>> +/**
> >>> + * struct zynqmp_afi_configreg - AFI configuration registers info.
> >>> + * @reg: Name of the AFI configuration register.
> >>> + * @id: Register index value.
> >>> + */
> >>> +struct zynqmp_afi_configreg {
> >>> + char *reg;
> >>> + u32 id;
> >>> +};
> >>> +
> >>> +static struct zynqmp_afi_configreg afi_cfgreg[] = {
> >>> + {.reg = "xlnx,afi-fm0-rd-bus-width", .id = AFIFM0_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm1-rd-bus-width", .id = AFIFM1_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm2-rd-bus-width", .id = AFIFM2_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm3-rd-bus-width", .id = AFIFM3_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm4-rd-bus-width", .id = AFIFM4_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm5-rd-bus-width", .id = AFIFM5_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm6-rd-bus-width", .id = AFIFM6_RDCTRL},
> >>> + {.reg = "xlnx,afi-fm0-wr-bus-width", .id = AFIFM0_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm1-wr-bus-width", .id = AFIFM1_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm2-wr-bus-width", .id = AFIFM2_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm3-wr-bus-width", .id = AFIFM3_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm4-wr-bus-width", .id = AFIFM4_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm5-wr-bus-width", .id = AFIFM5_WRCTRL},
> >>> + {.reg = "xlnx,afi-fm6-wr-bus-width", .id = AFIFM6_WRCTRL},
> >>> + {.reg = "xlnx,afi-fs-ss0-bus-width", .id = AFIFS},
> >>> + {.reg = "xlnx,afi-fs-ss2-bus-width", .id = AFIFS_SS2},
> >>> + {}
> >>> +};
> >>> +
> >>> +static int zynqmp_afi_config(struct zynqmp_afi *afi_data) {
> >>> + struct zynqmp_afi_configreg *cfgptr = afi_cfgreg;
> >>> + struct device_node *np = afi_data->of_node;
> >>> + u32 afi_ss0_val, afi_ss1_val, bus_width;
> >>> + int ret;
> >>> +
> >>> + while (cfgptr->reg) {
> >>> + ret = of_property_read_u32(np, cfgptr->reg, &bus_width);
> >>> + if (!ret) {
> >>> + if (cfgptr->id == AFIFS_SS2) {
> >>> + if (bus_width == 32)
> >>> + ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> + AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL);
> >>> + else if (bus_width == 64)
> >>> + ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> +
> >> AFIFS_SS0_SS2_BUS_WIDTH_64_CONFIG_VAL);
> >>> + else if (bus_width == 128)
> >>> + ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> +
> >> AFIFS_SS0_SS2_BUS_WIDTH_128_CONFIG_VAL);
> >>> + else
> >>> + return -EINVAL;
> >>> + } else if (cfgptr->id == AFIFS) {
> >>> + if (bus_width == 32)
> >>> + afi_ss0_val = AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL;
> >>> + else if (bus_width == 64)
> >>> + afi_ss0_val =
> >> AFIFS_SS0_SS2_BUS_WIDTH_64_CONFIG_VAL;
> >>> + else if (bus_width == 128)
> >>> + afi_ss0_val =
> >> AFIFS_SS0_SS2_BUS_WIDTH_128_CONFIG_VAL;
> >>> + else
> >>> + return -EINVAL;
> >>> +
> >>> + ret = of_property_read_u32(np, "xlnx,afi-fs-ss1-bus-
> >> width",
> >>> + &bus_width);
> >>> + if (!ret) {
> >>> + if (bus_width == 32)
> >>> + afi_ss1_val =
> >> AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL;
> >>> + else if (bus_width == 64)
> >>> + afi_ss1_val =
> >> AFIFS_SS1_BUS_WIDTH_64_CONFIG_VAL;
> >>> + else if (bus_width == 128)
> >>> + afi_ss1_val =
> >> AFIFS_SS1_BUS_WIDTH_128_CONFIG_VAL;
> >>> + else
> >>> + return -EINVAL;
> >>> +
> >>> + ret = zynqmp_pm_afi(AFIFS, afi_ss1_val |
> >> afi_ss0_val);
> >>> + }
> >>> + } else {
> >>> + if (bus_width == 32)
> >>> + ret = zynqmp_pm_afi(cfgptr->id,
> >>> + AFIFM_BUS_WIDTH_32_CONFIG_VAL);
> >>> + else if (bus_width == 64)
> >>> + ret = zynqmp_pm_afi(cfgptr->id,
> >>> + AFIFM_BUS_WIDTH_64_CONFIG_VAL);
> >>> + else if (bus_width == 128)
> >>> + ret = zynqmp_pm_afi(cfgptr->id,
> >>> + AFIFM_BUS_WIDTH_128_CONFIG_VAL);
> >>> + else
> >>> + return -EINVAL;
> >>> + }
> >>> + }
> >>> + cfgptr++;
> >>> + }
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int zynqmp_afi_enable_set(struct fpga_bridge *bridge, bool
> >>> +enable) {
> >>> + struct device_node *overlay = bridge->info->overlay;
> >>> + struct zynqmp_afi *priv = bridge->priv;
> >>> + int ret = 0;
> >>> +
> >>> + if (enable) {
> >>> + reset_control_reset(priv->resets);
> >>> + return 0;
> >>> + }
> >>> +
> >>> + of_node_get(overlay);
> >>> + priv->of_node =
> >>> + of_find_node_with_property(overlay,
> >>> + "xlnx,afi-fm0-rd-bus-width");
> >>
> >> I'm a little confused here. The fpga_image_info.overlay is for fpga-region, but
> >> from your binding doc this property is for this afi device. You want to add
> >> another overlay targeting afi dev node during reprograming?
> >>
> >
> > Yes, it uses Overlay's(overlay targeting afi dev node). As I said above for design-to-design AFI configs
> > relevant to the full region may change and these configs must be set prior to program the full region
> > once this overlay integrated to the live tree the existing afi config values will be replace with the new one's
> >
> >>> + if (priv->of_node)
> >>> + ret = zynqmp_afi_config(priv);
> >>> + of_node_put(priv->of_node);
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static const struct fpga_bridge_ops zynqmp_afi_br_ops = {
> >>> + .enable_set = zynqmp_afi_enable_set, };
> >>> +
> >>> +static const struct of_device_id zynqmp_afi_of_match[] = {
> >>> + { .compatible = "xlnx,zynqmp-afi-fpga" },
> >>> + { },
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, zynqmp_afi_of_match);
> >>> +
> >>> +static int zynqmp_afi_probe(struct platform_device *pdev) {
> >>> + struct device *dev = &pdev->dev;
> >>> + struct zynqmp_afi *priv;
> >>> + struct fpga_bridge *br;
> >>> +
> >>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> >>> + if (!priv)
> >>> + return -ENOMEM;
> >>> +
> >>> + priv->dev = dev;
> >>> +
> >>> + priv->resets =
> >> devm_reset_control_array_get_optional_exclusive(&pdev->dev);
> >>> + if (IS_ERR(priv->resets))
> >>> + return PTR_ERR(priv->resets);
> >>> +
> >>> + br = fpga_bridge_register(dev, "Xilinx ZynqMP AFI",
> >>> + &zynqmp_afi_br_ops, priv);
> >>> + if (IS_ERR(br)) {
> >>> + dev_err(dev, "unable to register Xilinx ZynqMP AFI");
> >>
> >> Need a "\n" at the end?
> >>
> >
> > Will fix.
> >
> > Regards,
> > Navakishore.
> >
>
> Thanks,
> Marco
>
Powered by blists - more mailing lists