[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220903045000.6df542a9@thinkpad>
Date: Sat, 3 Sep 2022 04:50:00 +0200
From: Marek Behún <kabel@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Vladimir Oltean <vladimir.oltean@....com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com,
Colin Foster <colin.foster@...advantage.com>,
Roopa Prabhu <roopa@...dia.com>,
Nikolay Aleksandrov <razor@...ckwall.org>,
Tobias Waldekranz <tobias@...dekranz.com>,
DENG Qingfang <dqfext@...il.com>,
Alvin Šipraga <alsi@...g-olufsen.dk>,
Linus Walleij <linus.walleij@...aro.org>,
Luiz Angelo Daros de Luca <luizluca@...il.com>,
Felix Fietkau <nbd@....name>, John Crispin <john@...ozen.org>,
Sean Wang <sean.wang@...iatek.com>
Subject: Re: [PATCH net-next 0/9] DSA changes for multiple CPU ports (part
4)
On Fri, 2 Sep 2022 20:44:37 +0200
Christian Marangi <ansuelsmth@...il.com> wrote:
> On Tue, Aug 30, 2022 at 10:59:23PM +0300, Vladimir Oltean wrote:
> > Those who have been following part 1:
> > https://patchwork.kernel.org/project/netdevbpf/cover/20220511095020.562461-1-vladimir.oltean@nxp.com/
> > part 2:
> > https://patchwork.kernel.org/project/netdevbpf/cover/20220521213743.2735445-1-vladimir.oltean@nxp.com/
> > and part 3:
> > https://patchwork.kernel.org/project/netdevbpf/cover/20220819174820.3585002-1-vladimir.oltean@nxp.com/
> > will know that I am trying to enable the second internal port pair from
> > the NXP LS1028A Felix switch for DSA-tagged traffic via "ocelot-8021q".
> >
> > This series represents the final part of that effort. We have:
> >
> > - the introduction of new UAPI in the form of IFLA_DSA_MASTER
> >
> > - preparation for LAG DSA masters in terms of suppressing some
> > operations for masters in the DSA core that simply don't make sense
> > when those masters are a bonding/team interface
> >
> > - handling all the net device events that occur between DSA and a
> > LAG DSA master, including migration to a different DSA master when the
> > current master joins a LAG, or the LAG gets destroyed
> >
> > - updating documentation
> >
> > - adding an implementation for NXP LS1028A, where things are insanely
> > complicated due to hardware limitations. We have 2 tagging protocols:
> >
> > * the native "ocelot" protocol (NPI port mode). This does not support
> > CPU ports in a LAG, and supports a single DSA master. The DSA master
> > can be changed between eno2 (2.5G) and eno3 (1G), but all ports must
> > be down during the changing process, and user ports assigned to the
> > old DSA master will refuse to come up if the user requests that
> > during a "transient" state.
> >
> > * the "ocelot-8021q" software-defined protocol, where the Ethernet
> > ports connected to the CPU are not actually "god mode" ports as far
> > as the hardware is concerned. So here, static assignment between
> > user and CPU ports is possible by editing the PGID_SRC masks for
> > the port-based forwarding matrix, and "CPU ports in a LAG" simply
> > means "a LAG like any other".
> >
> > The series was regression-tested on LS1028A using the local_termination.sh
> > kselftest, in most of the possible operating modes and tagging protocols.
> > I have not done a detailed performance evaluation yet, but using LAG, is
> > possible to exceed the termination bandwidth of a single CPU port in an
> > iperf3 test with multiple senders and multiple receivers.
> >
> > There was a previous RFC posted, which contains most of these changes,
> > however it's so old by now that it's unlikely anyone of the reviewers
> > remembers it in detail. I've applied most of the feedback requested by
> > Florian and Ansuel there.
> > https://lore.kernel.org/netdev/20220523104256.3556016-1-olteanv@gmail.com/
>
> Hi,
> I would love to test this but for me it's a bit problematic to use a
> net-next kernel. I wonder if it's possible to backport the 4 part to
> older kernel or other prereq are needed. (I know backporting the 4 part
> will be crazy but it's something that has to be done anyway to actually
> use this on OpenWrt where we currently use 5.10 and 5.15)
>
> Would be good to know if the 4 part require other changes to dsa core to
> make a LAG implementation working. (talking for 5.15 since backporting
> this to 5.10 is a nono...)
Just use the newest kernel. Trust me, backporting new DSA changes to
5.15 is painful. And to 5.10 and earlier it is a literal hell.
:) Marek
Powered by blists - more mailing lists