[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJiuCcdGS-H+tq0o47Zm=UJNEL+Ff0_mkUU1N86ttE=iOTbknw@mail.gmail.com>
Date: Sun, 4 Sep 2022 16:23:53 +0200
From: Clément Péron <peron.clem@...il.com>
To: Samuel Holland <samuel@...lland.org>
Cc: Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-sunxi@...ts.linux.dev,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 4/4] arm64: dts: allwinner: beelink-gs1: Enable GPU OPP
Hi Samuel,
On Sun, 4 Sept 2022 at 05:32, Samuel Holland <samuel@...lland.org> wrote:
>
> On 9/3/22 2:06 PM, Clément Péron wrote:
> > Hi Samuel,
> >
> > On Sat, 3 Sept 2022 at 20:41, Clément Péron <peron.clem@...il.com> wrote:
> >>
> >> Hi Samuel,
> >>
> >> On Tue, 23 Aug 2022 at 05:07, Samuel Holland <samuel@...lland.org> wrote:
> >>>
> >>> On 8/21/22 12:30 PM, Clément Péron wrote:
> >>>> Enable GPU OPP table for Beelink GS1
> >>>>
> >>>> Signed-off-by: Clément Péron <peron.clem@...il.com>
> >>>> ---
> >>>> arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 ++
> >>>> 1 file changed, 2 insertions(+)
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> >>>> index 6249e9e02928..20fc0584d1c6 100644
> >>>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> >>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
> >>>> @@ -5,6 +5,7 @@
> >>>>
> >>>> #include "sun50i-h6.dtsi"
> >>>> #include "sun50i-h6-cpu-opp.dtsi"
> >>>> +#include "sun50i-h6-gpu-opp.dtsi"
> >>>>
> >>>> #include <dt-bindings/gpio/gpio.h>
> >>>>
> >>>> @@ -261,6 +262,7 @@ reg_dcdca: dcdca {
> >>>> };
> >>>>
> >>>> reg_dcdcc: dcdcc {
> >>>> + regulator-always-on;
> >>>
> >>> Why is this necessary? This file already has:
> >>
> >> This is a relica from the first serie at this time the OPP doesn't
> >> properly enable the regulator it's now fixed since:
> >> https://patchwork.kernel.org/project/linux-pm/patch/81eb2efeeed1556d124065252f32777838a6d850.1589528491.git.viresh.kumar@linaro.org/
>
> This should have nothing to do with the OPP driver; lima already has a "mali"
> regulator consumer that should be enabled whenever the GPU is in use.
Okay so you propose to add a regulator_enable() in the panfrost
drivers in addition to the OPP consumer right?
I will send a patch to add this and see what's panfrost maintainer
think about it.
Regards,
Clement
>
> _Adding_ a regulator consumer from the OPP driver should not somehow decrease
> the refcount.
>
> >> I will drop it.
> >
> > After retesting it, it seems to still no take the regulator and make
> > my board hang... :(
> >
> > [ 17.698597] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI
> > I2C bus driver
> > [ 17.708475] sun4i-drm display-engine: bound 6000000.hdmi (ops
> > sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
> > [ 17.718350] [drm] Initialized sun4i-drm 1.0.0 20150629 for
> > display-engine on minor 1
> > [ 17.877443] Console: switching to colour frame buffer device 320x90
> > [ 17.936050] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb
> > frame buffer device
> > [ 17.961881] platform 5200000.usb: deferred probe pending
> >>>>> [ 31.710731] vdd-gpu: disabling <<<<<
>
> Are there any messages from lima, especially about mali-supply? Can you provide
> regulators_summary from debugfs?
>
> Regards,
> Samuel
Powered by blists - more mailing lists