| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220905032858.1462927-3-mawupeng1@huawei.com>
Date: Mon, 5 Sep 2022 11:28:58 +0800
From: Wupeng Ma <mawupeng1@...wei.com>
To: <akpm@...ux-foundation.org>, <david@...hat.com>, <npiggin@...e.de>,
<ying.huang@...el.com>, <hannes@...xchg.org>
CC: <corbet@....net>, <mcgrof@...nel.org>, <mgorman@...e.de>,
<keescook@...omium.org>, <yzaikin@...gle.com>,
<songmuchun@...edance.com>, <mike.kravetz@...cle.com>,
<osalvador@...e.de>, <surenb@...gle.com>, <mawupeng1@...wei.com>,
<rppt@...nel.org>, <charante@...eaurora.org>, <jsavitz@...hat.com>,
<linux-kernel@...r.kernel.org>, <linux-mm@...ck.org>,
kernel test robot <lkp@...el.com>
Subject: [PATCH -next v3 2/2] mm: sysctl: Introduce per zone watermark_scale_factor
From: Ma Wupeng <mawupeng1@...wei.com>
System may have little normal zone memory and huge movable memory in the
following situations:
- for system with kernelcore=nn% or kernelcore=mirror, movable zone will
be added and movable zone is bigger than normal zone in most cases.
- system with movable nodes, they will have multiple numa nodes with
only movable zone and movable zone will have plenty of memory.
Since kernel/driver can only use memory from non-movable zone in most
cases, normal zone need to increase its watermark to reserve more memory.
However, current watermark_scale_factor is used to control all zones
at once and can't be set separately. To reserve memory in non-movable
zones, the watermark is increased in movable zones as well. Which will
lead to inefficient kswapd.
To solve this problem, per zone watermark is introduced to tune each zone's
watermark separately. This can bring the following advantages:
- each zone can set its own watermark which bring flexibility
- lead to more efficient kswapd if this watermark is set fine
Here is real watermark data in my qemu machine(with THP disabled).
With watermark_scale_factor = 10, there is only 1440(772-68+807-71)
pages(5.76M) reserved for a system with 96G of memory. However if the
watermark is set to 100, the movable zone's watermark increased to
231908(93M), which is too much.
This situation is even worse with 32G of normal zone memory and 1T of
movable zone memory.
Modified | Vanilla wm_factor = 10 | Vanilla wm_factor = 30
Node 0, zone DMA | Node 0, zone DMA | Node 0, zone DMA
min 68 | min 68 | min 68
low 7113 | low 772 | low 7113
high **14158** | high **1476** | high **14158**
Node 0, zone Normal | Node 0, zone Normal | Node 0, zone Normal
min 71 | min 71 | min 71
low 7438 | low 807 | low 7438
high 14805 | high 1543 | high 14805
Node 0, zone Movable | Node 0, zone Movable | Node 0, zone Movable
min 1455 | min 1455 | min 1455
low 16388 | low 16386 | low 150787
high **31321** | high **31317** | high **300119**
Node 1, zone Movable | Node 1, zone Movable | Node 1, zone Movable
min 804 | min 804 | min 804
low 9061 | low 9061 | low 83379
high **17318** | high **17318** | high **165954**
With the modified per zone watermark_scale_factor, only dma/normal zone
will increase its watermark via the following command which the huge
movable zone stay the same.
% echo 100 100 100 10 > /proc/sys/vm/watermark_scale_factor
The reason to disable THP is khugepaged_min_free_kbytes_update() will
update min watermark.
Signed-off-by: Ma Wupeng <mawupeng1@...wei.com>
Reported-by: kernel test robot <lkp@...el.com>
---
Documentation/admin-guide/sysctl/vm.rst | 6 ++++
include/linux/mm.h | 2 +-
kernel/sysctl.c | 2 --
mm/page_alloc.c | 37 ++++++++++++++++++++-----
4 files changed, 37 insertions(+), 10 deletions(-)
diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 9b833e439f09..ec240aa45322 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -1002,6 +1002,12 @@ that the number of free pages kswapd maintains for latency reasons is
too small for the allocation bursts occurring in the system. This knob
can then be used to tune kswapd aggressiveness accordingly.
+The watermark_scale_factor is an array. You can set each zone's watermark
+separately and can be seen by reading this file::
+
+ % cat /proc/sys/vm/watermark_scale_factor
+ 10 10 10 10
+
zone_reclaim_mode
=================
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 21f8b27bd9fd..b291c795f9db 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2532,7 +2532,7 @@ extern void setup_per_cpu_pageset(void);
/* page_alloc.c */
extern int min_free_kbytes;
extern int watermark_boost_factor;
-extern int watermark_scale_factor;
+extern int watermark_scale_factor[MAX_NR_ZONES];
extern bool arch_has_descending_max_zone_pfns(void);
/* nommu.c */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 205d605cacc5..d16d06c71e5a 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2251,8 +2251,6 @@ static struct ctl_table vm_table[] = {
.maxlen = sizeof(watermark_scale_factor),
.mode = 0644,
.proc_handler = watermark_scale_factor_sysctl_handler,
- .extra1 = SYSCTL_ONE,
- .extra2 = SYSCTL_THREE_THOUSAND,
},
{
.procname = "percpu_pagelist_high_fraction",
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f1e4474879f1..7a6ac3b4ebb6 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -421,7 +421,6 @@ compound_page_dtor * const compound_page_dtors[NR_COMPOUND_DTORS] = {
int min_free_kbytes = 1024;
int user_min_free_kbytes = -1;
int watermark_boost_factor __read_mostly = 15000;
-int watermark_scale_factor = 10;
static unsigned long nr_kernel_pages __initdata;
static unsigned long nr_all_pages __initdata;
@@ -449,6 +448,20 @@ EXPORT_SYMBOL(nr_online_nodes);
int page_group_by_mobility_disabled __read_mostly;
+int watermark_scale_factor[MAX_NR_ZONES] = {
+#ifdef CONFIG_ZONE_DMA
+ [ZONE_DMA] = 10,
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ [ZONE_DMA32] = 10,
+#endif
+ [ZONE_NORMAL] = 10,
+#ifdef CONFIG_HIGHMEM
+ [ZONE_HIGHMEM] = 10,
+#endif
+ [ZONE_MOVABLE] = 10,
+};
+
#ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
/*
* During boot we initialize deferred pages on-demand, as needed, but once
@@ -8643,6 +8656,7 @@ static void __setup_per_zone_wmarks(void)
}
for_each_zone(zone) {
+ int zone_wm_factor;
u64 tmp;
spin_lock_irqsave(&zone->lock, flags);
@@ -8676,9 +8690,10 @@ static void __setup_per_zone_wmarks(void)
* scale factor in proportion to available memory, but
* ensure a minimum size on small systems.
*/
+ zone_wm_factor = watermark_scale_factor[zone_idx(zone)];
tmp = max_t(u64, tmp >> 2,
- mult_frac(zone_managed_pages(zone),
- watermark_scale_factor, 10000));
+ mult_frac(zone_managed_pages(zone), zone_wm_factor,
+ 10000));
zone->watermark_boost = 0;
zone->_watermark[WMARK_LOW] = min_wmark_pages(zone) + tmp;
@@ -8798,11 +8813,19 @@ int min_free_kbytes_sysctl_handler(struct ctl_table *table, int write,
int watermark_scale_factor_sysctl_handler(struct ctl_table *table, int write,
void *buffer, size_t *length, loff_t *ppos)
{
- int rc;
+ int i;
- rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
- if (rc)
- return rc;
+ proc_dointvec_minmax(table, write, buffer, length, ppos);
+
+ /*
+ * The unit is in fractions of 10,000. The default value of 10
+ * means the distances between watermarks are 0.1% of the available
+ * memory in the node/system. The maximum value is 3000, or 30% of
+ * memory.
+ */
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ watermark_scale_factor[i] =
+ clamp(watermark_scale_factor[i], 1, 3000);
if (write)
setup_per_zone_wmarks();
--
2.25.1
Powered by blists - more mailing lists