Message-Id: <20220906132833.573826669@linuxfoundation.org>
Date:   Tue,  6 Sep 2022 15:30:45 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Sander Vanheule <sander@...nheule.net>,
        Paul Cercueil <paul@...pouillou.net>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <brgl@...ev.pl>,
        Sasha Levin <sashal@...nel.org>,
        Luiz Angelo Daros de Luca <luizluca@...il.com>,
        Birger Koblitz <mail@...ger-koblitz.de>,
        Jan Hoffmann <jan@....eu>
Subject: [PATCH 5.19 097/155] gpio: realtek-otto: switch to 32-bit I/O

From: Sander Vanheule <sander@...nheule.net>

[ Upstream commit ee0175b3b44288c74d5292c2a9c2c154f6c0317e ]

By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
on MIPS, the IMR can end up containing garbage. This then results in
interrupt triggers for lines that don't have an interrupt handler
associated. The irq_desc lookup fails, and the ISR will not be cleared,
keeping the CPU busy until reboot, or until another IMR operation
restores the correct value. This situation appears to happen very
rarely, for < 0.5% of IMR writes.

Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
mapped peripheral registers, switch to using 32-bit I/O only, operating
on the entire bank for all single bit line settings. For 2-bit line
settings, with 16-bit port values, stick to manual (un)packing.

This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).

Reported-by: Luiz Angelo Daros de Luca <luizluca@...il.com> # DGS-1210-52
Reported-by: Birger Koblitz <mail@...ger-koblitz.de> # GS728TP
Reported-by: Jan Hoffmann <jan@....eu> # 1920-16G
Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
Signed-off-by: Sander Vanheule <sander@...nheule.net>
Cc: Paul Cercueil <paul@...pouillou.net>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Bartosz Golaszewski <brgl@...ev.pl>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++---------------
 1 file changed, 85 insertions(+), 81 deletions(-)

diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
index 63dcf42f7c206..d6418f89d3f63 100644
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -46,10 +46,20 @@
  * @lock: Lock for accessing the IRQ registers and values
  * @intr_mask: Mask for interrupts lines
  * @intr_type: Interrupt type selection
+ * @bank_read: Read a bank setting as a single 32-bit value
+ * @bank_write: Write a bank setting as a single 32-bit value
+ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
+ *
+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
+ * a value from (to) these registers. The IMR register consists of four 16-bit
+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
+ * 32 overflow into the second register.
  *
  * Because the interrupt mask register (IMR) combines the function of IRQ type
  * selection and masking, two extra values are stored. @intr_mask is used to
- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
  * the selected interrupt types. The logical AND of these values is written to
  * IMR on changes.
  */
@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl {
 	void __iomem *cpumask_base;
 	struct cpumask cpu_irq_maskable;
 	raw_spinlock_t lock;
-	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
-	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
-	unsigned int (*port_offset_u8)(unsigned int port);
-	unsigned int (*port_offset_u16)(unsigned int port);
+	u8 intr_mask[REALTEK_GPIO_MAX];
+	u8 intr_type[REALTEK_GPIO_MAX];
+	u32 (*bank_read)(void __iomem *reg);
+	void (*bank_write)(void __iomem *reg, u32 value);
+	unsigned int (*line_imr_pos)(unsigned int line);
 };
 
 /* Expand with more flags as devices with other quirks are added */
@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
  * port. The two interrupt mask registers store two bits per GPIO, so use u16
  * values.
  */
-static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
 {
-	return port;
+	return ioread32be(reg);
 }
 
-static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
 {
-	return 2 * port;
+	iowrite32be(value, reg);
+}
+
+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
+{
+	unsigned int port_pin = line % 8;
+	unsigned int port = line / 8;
+
+	return 2 * (8 * (port ^ 1) + port_pin);
 }
 
 /*
@@ -119,66 +138,67 @@ static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
  * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
  * second ports 3 and 2.
  */
-static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
+static u32 realtek_gpio_bank_read(void __iomem *reg)
 {
-	return 3 - port;
+	return ioread32(reg);
 }
 
-static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
+static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
 {
-	return 2 * (port ^ 1);
+	iowrite32(value, reg);
 }
 
-static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
-	unsigned int port, u16 irq_type, u16 irq_mask)
+static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
 {
-	iowrite16(irq_type & irq_mask,
-		ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
+	return 2 * line;
 }
 
-static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
-	unsigned int port, u8 mask)
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
 {
-	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+	ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
 }
 
-static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
 {
-	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+	return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
 }
 
-/* Set the rising and falling edge mask bits for a GPIO port pin */
-static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
+/* Set the rising and falling edge mask bits for a GPIO pin */
+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
 {
-	return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
+	void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
+	unsigned int line_shift = ctrl->line_imr_pos(line);
+	unsigned int shift = line_shift % 32;
+	u32 irq_type = ctrl->intr_type[line];
+	u32 irq_mask = ctrl->intr_mask[line];
+	u32 reg_val;
+
+	reg += 4 * (line_shift / 32);
+	reg_val = ioread32(reg);
+	reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
+	reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
+	iowrite32(reg_val, reg);
 }
 
 static void realtek_gpio_irq_ack(struct irq_data *data)
 {
 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
 	irq_hw_number_t line = irqd_to_hwirq(data);
-	unsigned int port = line / 8;
-	unsigned int port_pin = line % 8;
 
-	realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
+	realtek_gpio_clear_isr(ctrl, BIT(line));
 }
 
 static void realtek_gpio_irq_unmask(struct irq_data *data)
 {
 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
 	unsigned int line = irqd_to_hwirq(data);
-	unsigned int port = line / 8;
-	unsigned int port_pin = line % 8;
 	unsigned long flags;
-	u16 m;
 
 	gpiochip_enable_irq(&ctrl->gc, line);
 
 	raw_spin_lock_irqsave(&ctrl->lock, flags);
-	m = ctrl->intr_mask[port];
-	m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-	ctrl->intr_mask[port] = m;
-	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+	ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
+	realtek_gpio_update_line_imr(ctrl, line);
 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
 }
 
@@ -186,16 +206,11 @@ static void realtek_gpio_irq_mask(struct irq_data *data)
 {
 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
 	unsigned int line = irqd_to_hwirq(data);
-	unsigned int port = line / 8;
-	unsigned int port_pin = line % 8;
 	unsigned long flags;
-	u16 m;
 
 	raw_spin_lock_irqsave(&ctrl->lock, flags);
-	m = ctrl->intr_mask[port];
-	m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-	ctrl->intr_mask[port] = m;
-	realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+	ctrl->intr_mask[line] = 0;
+	realtek_gpio_update_line_imr(ctrl, line);
 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
 
 	gpiochip_disable_irq(&ctrl->gc, line);
@@ -205,10 +220,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
 {
 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
 	unsigned int line = irqd_to_hwirq(data);
-	unsigned int port = line / 8;
-	unsigned int port_pin = line % 8;
 	unsigned long flags;
-	u16 type, t;
+	u8 type;
 
 	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
 	case IRQ_TYPE_EDGE_FALLING:
@@ -227,11 +240,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
 	irq_set_handler_locked(data, handle_edge_irq);
 
 	raw_spin_lock_irqsave(&ctrl->lock, flags);
-	t = ctrl->intr_type[port];
-	t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
-	t |= realtek_gpio_imr_bits(port_pin, type);
-	ctrl->intr_type[port] = t;
-	realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
+	ctrl->intr_type[line] = type;
+	realtek_gpio_update_line_imr(ctrl, line);
 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
 
 	return 0;
@@ -242,28 +252,21 @@ static void realtek_gpio_irq_handler(struct irq_desc *desc)
 	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
 	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
-	unsigned int lines_done;
-	unsigned int port_pin_count;
 	unsigned long status;
 	int offset;
 
 	chained_irq_enter(irq_chip, desc);
 
-	for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
-		status = realtek_gpio_read_isr(ctrl, lines_done / 8);
-		port_pin_count = min(gc->ngpio - lines_done, 8U);
-		for_each_set_bit(offset, &status, port_pin_count)
-			generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
-	}
+	status = realtek_gpio_read_isr(ctrl);
+	for_each_set_bit(offset, &status, gc->ngpio)
+		generic_handle_domain_irq(gc->irq.domain, offset);
 
 	chained_irq_exit(irq_chip, desc);
 }
 
-static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
-	unsigned int port, int cpu)
+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
 {
-	return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
-		REALTEK_GPIO_PORTS_PER_BANK * cpu;
+	return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
 }
 
 static int realtek_gpio_irq_set_affinity(struct irq_data *data,
@@ -271,12 +274,10 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
 {
 	struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
 	unsigned int line = irqd_to_hwirq(data);
-	unsigned int port = line / 8;
-	unsigned int port_pin = line % 8;
 	void __iomem *irq_cpu_mask;
 	unsigned long flags;
 	int cpu;
-	u8 v;
+	u32 v;
 
 	if (!ctrl->cpumask_base)
 		return -ENXIO;
@@ -284,15 +285,15 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
 	raw_spin_lock_irqsave(&ctrl->lock, flags);
 
 	for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
-		irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
-		v = ioread8(irq_cpu_mask);
+		irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
+		v = ctrl->bank_read(irq_cpu_mask);
 
 		if (cpumask_test_cpu(cpu, dest))
-			v |= BIT(port_pin);
+			v |= BIT(line);
 		else
-			v &= ~BIT(port_pin);
+			v &= ~BIT(line);
 
-		iowrite8(v, irq_cpu_mask);
+		ctrl->bank_write(irq_cpu_mask, v);
 	}
 
 	raw_spin_unlock_irqrestore(&ctrl->lock, flags);
@@ -305,16 +306,17 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
 static int realtek_gpio_irq_init(struct gpio_chip *gc)
 {
 	struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
-	unsigned int port;
+	u32 mask_all = GENMASK(gc->ngpio - 1, 0);
+	unsigned int line;
 	int cpu;
 
-	for (port = 0; (port * 8) < gc->ngpio; port++) {
-		realtek_gpio_write_imr(ctrl, port, 0, 0);
-		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+	for (line = 0; line < gc->ngpio; line++)
+		realtek_gpio_update_line_imr(ctrl, line);
 
-		for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
-			iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
-	}
+	realtek_gpio_clear_isr(ctrl, mask_all);
+
+	for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
+		ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
 
 	return 0;
 }
@@ -387,12 +389,14 @@ static int realtek_gpio_probe(struct platform_device *pdev)
 
 	if (dev_flags & GPIO_PORTS_REVERSED) {
 		bgpio_flags = 0;
-		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
-		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
+		ctrl->bank_read = realtek_gpio_bank_read;
+		ctrl->bank_write = realtek_gpio_bank_write;
+		ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
 	} else {
 		bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
-		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
-		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
+		ctrl->bank_read = realtek_gpio_bank_read_swapped;
+		ctrl->bank_write = realtek_gpio_bank_write_swapped;
+		ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
 	}
 
 	err = bgpio_init(&ctrl->gc, dev, 4,
-- 
2.35.1

Powered by blists - more mailing lists