[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220906135004.14885-5-andriy.shevchenko@linux.intel.com>
Date: Tue, 6 Sep 2022 16:49:57 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Gene Chen <gene_chen@...htek.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Andrew Jeffery <andrew@...id.au>, linux-leds@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Cc: Pavel Machek <pavel@....cz>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Kurt Kanzenbach <kurt@...utronix.de>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Lee Jones <lee@...nel.org>
Subject: [PATCH v3 04/11] leds: bcm6328: Get rid of custom led_init_default_state_get()
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/leds/leds-bcm6328.c | 49 ++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 2d4d87957a30..246f1296ab09 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -330,7 +330,9 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
{
struct led_init_data init_data = {};
struct bcm6328_led *led;
- const char *state;
+ enum led_default_state state;
+ unsigned long val, shift;
+ void __iomem *mode;
int rc;
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
@@ -346,31 +348,29 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
if (of_property_read_bool(nc, "active-low"))
led->active_low = true;
- if (!of_property_read_string(nc, "default-state", &state)) {
- if (!strcmp(state, "on")) {
+ init_data.fwnode = of_fwnode_handle(nc);
+
+ state = led_init_default_state_get(init_data.fwnode);
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ led->cdev.brightness = LED_FULL;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ shift = bcm6328_pin2shift(led->pin);
+ if (shift / 16)
+ mode = mem + BCM6328_REG_MODE_HI;
+ else
+ mode = mem + BCM6328_REG_MODE_LO;
+
+ val = bcm6328_led_read(mode) >> BCM6328_LED_SHIFT(shift % 16);
+ val &= BCM6328_LED_MODE_MASK;
+ if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
+ (!led->active_low && val == BCM6328_LED_MODE_ON))
led->cdev.brightness = LED_FULL;
- } else if (!strcmp(state, "keep")) {
- void __iomem *mode;
- unsigned long val, shift;
-
- shift = bcm6328_pin2shift(led->pin);
- if (shift / 16)
- mode = mem + BCM6328_REG_MODE_HI;
- else
- mode = mem + BCM6328_REG_MODE_LO;
-
- val = bcm6328_led_read(mode) >>
- BCM6328_LED_SHIFT(shift % 16);
- val &= BCM6328_LED_MODE_MASK;
- if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
- (!led->active_low && val == BCM6328_LED_MODE_ON))
- led->cdev.brightness = LED_FULL;
- else
- led->cdev.brightness = LED_OFF;
- } else {
+ else
led->cdev.brightness = LED_OFF;
- }
- } else {
+ break;
+ default:
led->cdev.brightness = LED_OFF;
}
@@ -378,7 +378,6 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
led->cdev.brightness_set = bcm6328_led_set;
led->cdev.blink_set = bcm6328_blink_set;
- init_data.fwnode = of_fwnode_handle(nc);
rc = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
if (rc < 0)
--
2.35.1
Powered by blists - more mailing lists