[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220906145528.40079-1-shenwei.wang@nxp.com>
Date: Tue, 6 Sep 2022 09:55:23 -0500
From: Shenwei Wang <shenwei.wang@....com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Alexander Stein <alexander.stein@...tq-group.com>,
Marek Vasut <marex@...x.de>,
Max Krummenacher <max.krummenacher@...adex.com>,
Matthias Schiffer <matthias.schiffer@...group.com>,
Denys Drozdov <denys.drozdov@...adex.com>,
Tim Harvey <tharvey@...eworks.com>,
Dong Aisheng <aisheng.dong@....com>,
Alex Marginean <alexandru.marginean@....com>,
Reinhold Mueller <reinhold.mueller@...rion.com>,
Shenwei Wang <shenwei.wang@....com>,
Viorel Suman <viorel.suman@....com>,
Abel Vesa <abelvesa@...nel.org>, Ming Qian <ming.qian@....com>,
Peng Fan <peng.fan@....com>, Li Yang <leoyang.li@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev
Subject: [PATCH RESEND v7 0/5] add imx8dxl evk support
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
The series of patches is to add the imx8dxl soc and its evk board
support.
RESEND because the previous series of patches were disordered.
changes in V7:
- move the fec1 reset gpio into its phy node
changes in V6:
- The V6 changes mainly respond to the comments from Shawn
- Separate the V5 patch into SoC and Board commits
- Remove the unnecessary properties of "max-frequency"
in usdhc2 node
- Remove the unnecessary properties of "clk_csr" in eqos node
- Fix several coding style problems
changes in V5:
- change the "scu" node name to "system-controller"
- fix the typo in the comments for imx8dxl evk board
changes in V4:
- move i2c/mmc/serial aliases from soc to board
- correct the node names to follow the generic names recommendation
- remove some unused nodes in the evk board dts
changes in V3:
- re-order the commit sequence according to Krzysztof's feedback
- correct the syntax and styple problems pointed by Krzysztof
(Thank you for the detailed review, Krzysztof!)
- remove the unused nodes in imx8dxl-evk.dts
- dt_binding_check passed
Changes in V2:
- removed the edma2 device node because the edma v3 driver hasn't been
upstreamed yet.
- removed the imx8dxl_cm4 alias to fix the compile error.
- removed the extra blank lines at EOF.
- dt_binding_check passed.
Shenwei Wang (5):
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
arm64: dts: imx8: add a node label to ddr-pmu
arm64: dts: freescale: add i.MX8DXL SoC support
arm64: dts: freescale: add support for i.MX8DXL EVK board
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 426 ++++++++++++++++++
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 52 +++
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 142 ++++++
.../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 9 +
.../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 74 +++
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 238 ++++++++++
include/dt-bindings/firmware/imx/rsrc.h | 7 +
10 files changed, 956 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
--
2.25.1
Powered by blists - more mailing lists