| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220906222351.64760-11-helgaas@kernel.org>
Date: Tue, 6 Sep 2022 17:23:51 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>,
Rajvi Jingar <rajvi.jingar@...ux.intel.com>,
"Rafael J . Wysocki" <rafael@...nel.org>
Cc: Koba Ko <koba.ko@...onical.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
"David E . Box" <david.e.box@...ux.intel.com>,
Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@...ux.intel.com>,
linux-pci@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v3 10/10] PCI/PM: Always disable PTM for all devices during suspend
From: Bjorn Helgaas <bhelgaas@...gle.com>
We want to disable PTM on Root Ports because that allows some chips, e.g.,
Intel mobile chips since Coffee Lake, to enter a lower-power PM state.
That means we also have to disable PTM on downstream devices. PCIe r6.0,
sec 2.2.8, recommends that functions support generation of messages in
non-D0 states, so we have to assume Switch Upstream Ports or Endpoints may
send PTM Requests while in D1, D2, and D3hot. A PTM message received by a
Downstream Port (including a Root Port) with PTM disabled must be treated
as an Unsupported Request (sec 6.21.3).
PTM was previously disabled only for Root Ports, and it was disabled in
pci_prepare_to_sleep(), which is not called at all if a driver supports
legacy PM or does its own state saving.
Instead, disable PTM early in pci_pm_suspend() and pci_pm_runtime_suspend()
so we do it in all cases.
Previously PTM was disabled *after* saving device state, so the state
restore on resume automatically re-enabled it. Since we now disable PTM
*before* saving state, we must explicitly re-enable it in pci_pm_resume()
and pci_pm_runtime_resume().
Here's a sample of errors that occur when PTM is disabled only on the Root
Port. With this topology:
0000:00:1d.0 Root Port to [bus 08-71]
0000:08:00.0 Switch Upstream Port to [bus 09-71]
Kai-Heng reported errors like this:
pcieport 0000:00:1d.0: [20] UnsupReq (First)
pcieport 0000:00:1d.0: AER: TLP Header: 34000000 08000052 00000000 00000000
Decoding TLP header 0x34...... (0011 0100b) and 0x08000052:
Fmt 001b 4 DW header, no data
Type 1 0100b Msg (Local - Terminate at Receiver)
Requester ID 0x0800 Bus 08 Devfn 00.0
Message Code 0x52 0101 0010b PTM Request
The 00:1d.0 Root Port logged an Unsupported Request error when it received
a PTM Request with Requester ID 08:00.0.
Fixes: a697f072f5da ("PCI: Disable PTM during suspend to save power")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216210
Reported-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
---
drivers/pci/pci-driver.c | 11 +++++++++++
drivers/pci/pci.c | 28 ++--------------------------
2 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 2815922ac525..107d77f3c846 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -774,6 +774,12 @@ static int pci_pm_suspend(struct device *dev)
pci_dev->skip_bus_pm = false;
+ /*
+ * Disabling PTM allows some systems, e.g., Intel mobile chips
+ * since Coffee Lake, to enter a lower-power PM state.
+ */
+ pci_suspend_ptm(pci_dev);
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend(dev, PMSG_SUSPEND);
@@ -982,6 +988,8 @@ static int pci_pm_resume(struct device *dev)
if (pci_dev->state_saved)
pci_restore_standard_config(pci_dev);
+ pci_resume_ptm(pci_dev);
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume(dev);
@@ -1269,6 +1277,8 @@ static int pci_pm_runtime_suspend(struct device *dev)
pci_power_t prev = pci_dev->current_state;
int error;
+ pci_suspend_ptm(pci_dev);
+
/*
* If pci_dev->driver is not set (unbound), we leave the device in D0,
* but it may go to D3cold when the bridge above it runtime suspends.
@@ -1330,6 +1340,7 @@ static int pci_pm_runtime_resume(struct device *dev)
* D3cold when the bridge above it runtime suspended.
*/
pci_pm_default_resume_early(pci_dev);
+ pci_resume_ptm(pci_dev);
if (!pci_dev->driver)
return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 83818f81577d..107afa0a5b03 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2706,24 +2706,12 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
- /*
- * There are systems (for example, Intel mobile chips since Coffee
- * Lake) where the power drawn while suspended can be significantly
- * reduced by disabling PTM on PCIe root ports as this allows the
- * port to enter a lower-power PM state and the SoC to reach a
- * lower-power idle state as a whole.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
- pci_suspend_ptm(dev);
-
pci_enable_wake(dev, target_state, wakeup);
error = pci_set_power_state(dev, target_state);
- if (error) {
+ if (error)
pci_enable_wake(dev, target_state, false);
- pci_restore_ptm_state(dev);
- }
return error;
}
@@ -2764,24 +2752,12 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
- /*
- * There are systems (for example, Intel mobile chips since Coffee
- * Lake) where the power drawn while suspended can be significantly
- * reduced by disabling PTM on PCIe root ports as this allows the
- * port to enter a lower-power PM state and the SoC to reach a
- * lower-power idle state as a whole.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
- pci_suspend_ptm(dev);
-
__pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
error = pci_set_power_state(dev, target_state);
- if (error) {
+ if (error)
pci_enable_wake(dev, target_state, false);
- pci_restore_ptm_state(dev);
- }
return error;
}
--
2.25.1
Powered by blists - more mailing lists