linux-kernel - Re: [PATCH net-next 2/2] ARM: dts: aspeed: elbert: Enable mac3 controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 6 Sep 2022 02:22:50 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     rentao.bupt@...il.com
Cc:     "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Heyi Guo <guoheyi@...ux.alibaba.com>,
        Dylan Hung <dylan_hung@...eedtech.com>,
        Guangbin Huang <huangguangbin2@...wei.com>,
        Liang He <windhl@....com>, Hao Chen <chenhao288@...ilicon.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...id.au>, Tao Ren <taoren@...com>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 2/2] ARM: dts: aspeed: elbert: Enable mac3
 controller

On Mon, Sep 05, 2022 at 04:56:34PM -0700, rentao.bupt@...il.com wrote:
> From: Tao Ren <rentao.bupt@...il.com>
> 
> Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
> onboard switch directly (fixed link).

What is the switch? Could you also add a DT node for it?

> 
> Signed-off-by: Tao Ren <rentao.bupt@...il.com>
> ---
>  arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
> index 27b43fe099f1..52cb617783ac 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
> @@ -183,3 +183,14 @@ imux31: i2c@7 {
>  &i2c11 {
>  	status = "okay";
>  };
> +
> +&mac3 {
> +	status = "okay";
> +	phy-mode = "rgmii";

'rgmii' is suspicious, though not necessarily wrong. This value is
normally passed to the PHY, so the PHY inserts the RGMII delay. You
however don't have a PHY. So i assume the switch is inserting the
delay? Again, being able to see the DT properties for the switch would
be useful.

   Andrew