| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220907204924.2040384-2-bhupesh.sharma@linaro.org>
Date: Thu, 8 Sep 2022 02:19:21 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: devicetree@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, agross@...nel.org,
bhupesh.sharma@...aro.org, bhupesh.linux@...il.com,
linux-kernel@...r.kernel.org, robh+dt@...nel.org,
krzysztof.kozlowski@...aro.org, netdev@...r.kernel.org,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh@...nel.org>, Vinod Koul <vkoul@...nel.org>,
David Miller <davem@...emloft.net>
Subject: [PATCH 1/4] dt-bindings: net: qcom,ethqos: Convert bindings to yaml
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
Cc: Bjorn Andersson <andersson@...nel.org>
Cc: Rob Herring <robh@...nel.org>
Cc: Vinod Koul <vkoul@...nel.org>
Cc: David Miller <davem@...emloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
---
.../devicetree/bindings/net/qcom,ethqos.txt | 66 ---------
.../devicetree/bindings/net/qcom,ethqos.yaml | 139 ++++++++++++++++++
2 files changed, 139 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt
create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.yaml
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
deleted file mode 100644
index 1f5746849a71..000000000000
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Qualcomm Ethernet ETHQOS device
-
-This documents dwmmac based ethernet device which supports Gigabit
-ethernet for version v2.3.0 onwards.
-
-This device has following properties:
-
-Required properties:
-
-- compatible: Should be one of:
- "qcom,qcs404-ethqos"
- "qcom,sm8150-ethqos"
-
-- reg: Address and length of the register set for the device
-
-- reg-names: Should contain register names "stmmaceth", "rgmii"
-
-- clocks: Should contain phandle to clocks
-
-- clock-names: Should contain clock names "stmmaceth", "pclk",
- "ptp_ref", "rgmii"
-
-- interrupts: Should contain phandle to interrupts
-
-- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
-
-Rest of the properties are defined in stmmac.txt file in same directory
-
-
-Example:
-
-ethernet: ethernet@...0000 {
- compatible = "qcom,qcs404-ethqos";
- reg = <0x07a80000 0x10000>,
- <0x07a96000 0x100>;
- reg-names = "stmmaceth", "rgmii";
- clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
- clocks = <&gcc GCC_ETH_AXI_CLK>,
- <&gcc GCC_ETH_SLAVE_AHB_CLK>,
- <&gcc GCC_ETH_PTP_CLK>,
- <&gcc GCC_ETH_RGMII_CLK>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_lpi";
- snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
-
- snps,txpbl = <8>;
- snps,rxpbl = <2>;
- snps,aal;
- snps,tso;
-
- phy-handle = <&phy1>;
- phy-mode = "rgmii";
-
- mdio {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- compatible = "snps,dwmac-mdio";
- phy1: phy@4 {
- device_type = "ethernet-phy";
- reg = <0x4>;
- };
- };
-
-};
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
new file mode 100644
index 000000000000..f05df9b0d106
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device
+
+maintainers:
+ - Bhupesh Sharma <bhupesh.sharma@...aro.org>
+
+description:
+ This binding describes the dwmmac based Qualcomm ethernet devices which
+ support Gigabit ethernet (version v2.3.0 onwards).
+
+ So, this file documents platform glue layer for dwmmac stmmac based Qualcomm
+ ethernet devices.
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - qcom,qcs404-ethqos
+ - qcom,sm8150-ethqos
+
+ reg: true
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: stmmaceth
+ - const: rgmii
+
+ interrupts: true
+
+ interrupt-names: true
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: stmmaceth
+ - const: pclk
+ - const: ptp_ref
+ - const: rgmii
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ mdio: true
+
+ phy-handle: true
+
+ phy-mode: true
+
+ snps,reset-gpio: true
+
+ snps,tso:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enables the TSO feature otherwise it will be managed by MAC HW capability register.
+
+ power-domains: true
+
+ resets: true
+
+ rx-fifo-depth: true
+
+ tx-fifo-depth: true
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ ethernet1: ethernet@...00 {
+ compatible = "qcom,sm8150-ethqos";
+ reg = <0x0 0x00020000 0x0 0x10000>,
+ <0x0 0x00036000 0x0 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_EMAC_AXI_CLK>,
+ <&gcc GCC_EMAC_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC_PTP_CLK>,
+ <&gcc GCC_EMAC_RGMII_CLK>;
+ interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ power-domains = <&gcc EMAC_GDSC>;
+ resets = <&gcc GCC_EMAC_BCR>;
+ iommus = <&apps_smmu 0x3C0 0x0>;
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 11000 70000>;
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_defaults>;
+
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ compatible = "snps,dwmac-mdio";
+ rgmii_phy: phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&tlmm>;
+ interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
+ device_type = "ethernet-phy";
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
--
2.37.1
Powered by blists - more mailing lists