lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <19ee3ece7d8b728375804a65d061dcab1a7725f0.camel@mediatek.com>
Date:   Wed, 7 Sep 2022 17:09:51 +0800
From:   CK Hu <ck.hu@...iatek.com>
To:     <xinlei.lee@...iatek.com>, <matthias.bgg@...il.com>,
        <angelogioacchino.delregno@...labora.com>,
        <rex-bc.chen@...iatek.com>, <jason-jh.lin@...iatek.com>,
        <chunkuang.hu@...nel.org>, <yongqiang.niu@...iatek.com>,
        <p.zabel@...gutronix.de>, <airlied@...ux.ie>, <daniel@...ll.ch>
CC:     <jitao.shi@...iatek.com>, <linux-kernel@...r.kernel.org>,
        <dri-devel@...ts.freedesktop.org>,
        <Project_Global_Chrome_Upstream_Group@...iatek.com>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5,2/2] drm: mediatek: Adjust the dpi output format to
 MT8186

Hi, Xinlei:

On Mon, 2022-09-05 at 21:34 +0800, xinlei.lee@...iatek.com wrote:
> From: Xinlei Lee <xinlei.lee@...iatek.com>
> 
> Dpi output needs to adjust the output format to dual edge for MT8186.

Separate this patch into two patches. One is adding edge_cfg_in_mmsys,
and another one is adding mt8186 dpi support.

I think the default value in mmsys (single edge) should work for some
display so that mmsys hardware use single edge for default value. So I
need you to describe more information why we need dual edge.

> 
> Co-developed-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Xinlei Lee <xinlei.lee@...iatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@...labora.com>
> Reviewed-by: NĂ­las F. R. A. Prado <nfraprado@...labora.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c      | 31
> +++++++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  5 ++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c  |  2 ++
>  3 files changed, 38 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 630a4e301ef6..ffe4a4b70a0f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -15,6 +15,7 @@
>  #include <linux/of_graph.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
>  #include <linux/types.h>
> 
>  #include <video/videomode.h>
> @@ -30,6 +31,7 @@
>  #include "mtk_disp_drv.h"
>  #include "mtk_dpi_regs.h"
>  #include "mtk_drm_ddp_comp.h"
> +#include "mtk_drm_drv.h"
> 
>  enum mtk_dpi_out_bit_num {
>  	MTK_DPI_OUT_BIT_NUM_8BITS,
> @@ -82,6 +84,7 @@ struct mtk_dpi {
>  	struct pinctrl_state *pins_dpi;
>  	u32 output_fmt;
>  	int refcount;
> +	struct device *mmsys_dev;
>  };
> 
>  static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
> @@ -135,6 +138,7 @@ struct mtk_dpi_yc_limit {
>   * @yuv422_en_bit: Enable bit of yuv422.
>   * @csc_enable_bit: Enable bit of CSC.
>   * @pixels_per_iter: Quantity of transferred pixels per iteration.
> + * @edge_cfg_in_mmsys: If the edge configuration for DPI's output
> needs to be set in MMSYS.
>   */
>  struct mtk_dpi_conf {
>  	unsigned int (*cal_factor)(int clock);
> @@ -153,6 +157,7 @@ struct mtk_dpi_conf {
>  	u32 yuv422_en_bit;
>  	u32 csc_enable_bit;
>  	u32 pixels_per_iter;
> +	bool edge_cfg_in_mmsys;
>  };
> 
>  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val,
> u32 mask)
> @@ -449,6 +454,9 @@ static void mtk_dpi_dual_edge(struct mtk_dpi
> *dpi)
>  		mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
>  			     dpi->output_fmt ==
> MEDIA_BUS_FMT_RGB888_2X12_LE ?
>  			     EDGE_SEL : 0, EDGE_SEL);
> +		if (dpi->conf->edge_cfg_in_mmsys)
> +			mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev,
> DPI_RGB888_DDR_CON,
> +						     DPI_FORMAT_MASK);
>  	} else {
>  		mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
> 0);
>  	}
> @@ -778,8 +786,10 @@ static int mtk_dpi_bind(struct device *dev,
> struct device *master, void *data)
>  {
>  	struct mtk_dpi *dpi = dev_get_drvdata(dev);
>  	struct drm_device *drm_dev = data;
> +	struct mtk_drm_private *priv = drm_dev->dev_private;
>  	int ret;
> 
> +	dpi->mmsys_dev = priv->mmsys_dev;
>  	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
>  				      DRM_MODE_ENCODER_TMDS);
>  	if (ret) {
> @@ -930,6 +940,24 @@ static const struct mtk_dpi_conf mt8183_conf = {
>  	.csc_enable_bit = CSC_ENABLE,
>  };
> 
> +static const struct mtk_dpi_conf mt8186_conf = {
> +	.cal_factor = mt8183_calculate_factor,
> +	.reg_h_fre_con = 0xe0,
> +	.max_clock_khz = 150000,
> +	.output_fmts = mt8183_output_fmts,
> +	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> +	.edge_cfg_in_mmsys = true,
> +	.pixels_per_iter = 1,
> +	.is_ck_de_pol = true,
> +	.swap_input_support = true,
> +	.support_direct_pin = true,
> +	.dimension_mask = HPW_MASK,
> +	.hvsize_mask = HSIZE_MASK,
> +	.channel_swap_shift = CH_SWAP,
> +	.yuv422_en_bit = YUV422_EN,
> +	.csc_enable_bit = CSC_ENABLE,
> +};
> +
>  static const struct mtk_dpi_conf mt8192_conf = {
>  	.cal_factor = mt8183_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
> @@ -1080,6 +1108,9 @@ static const struct of_device_id
> mtk_dpi_of_ids[] = {
>  	{ .compatible = "mediatek,mt8183-dpi",
>  	  .data = &mt8183_conf,
>  	},
> +	{ .compatible = "mediatek,mt8186-dpi",
> +	  .data = &mt8186_conf,
> +	},
>  	{ .compatible = "mediatek,mt8192-dpi",
>  	  .data = &mt8192_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 62bd4931b344..779e868ffb1a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -235,4 +235,9 @@
>  #define MATRIX_SEL_RGB_TO_JPEG		0
>  #define MATRIX_SEL_RGB_TO_BT601		2
> 
> +/* Values for DPI configuration in MMSYS address space */
> +#define DPI_FORMAT_MASK			0x1
> +#define DPI_RGB888_DDR_CON		BIT(0)
> +#define DPI_RGB565_SDR_CON		BIT(1)

This is the mmsys register definition, so move these to mmsys driver.

Regards,
CK

> +
>  #endif /* __MTK_DPI_REGS_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 5f02f8d0e4fc..28eb1ac91c15 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -631,6 +631,8 @@ static const struct of_device_id
> mtk_ddp_comp_dt_ids[] = {
>  	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8183-dpi",
>  	  .data = (void *)MTK_DPI },
> +	{ .compatible = "mediatek,mt8186-dpi",
> +	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8192-dpi",
>  	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8195-dp-intf",
> --
> 2.18.0
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ