[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220907110728.19092-9-johan+linaro@kernel.org>
Date: Wed, 7 Sep 2022 13:07:20 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Kishon Vijay Abraham I <kishon@...com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH 08/16] phy: qcom-qmp-ufs: drop unused defines
Drop defines and enums that are unused since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 34 +------------------------
1 file changed, 1 insertion(+), 33 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 7bd3c992b841..62e9007137c9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -28,39 +28,15 @@
#define SW_RESET BIT(0)
/* QPHY_POWER_DOWN_CONTROL */
#define SW_PWRDN BIT(0)
-#define REFCLK_DRV_DSBL BIT(1)
/* QPHY_START_CONTROL bits */
#define SERDES_START BIT(0)
#define PCS_START BIT(1)
-#define PLL_READY_GATE_EN BIT(3)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
-#define PHYSTATUS_4_20 BIT(7)
-/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE BIT(0) /* enables USB3 mode */
-#define DP_MODE BIT(1) /* enables DP mode */
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
-
#define PHY_INIT_COMPLETE_TIMEOUT 10000
-#define POWER_DOWN_DELAY_US_MIN 10
-#define POWER_DOWN_DELAY_US_MAX 11
-
-#define MAX_PROP_NAME 32
/* Define the assumed distance between lanes for underspecified device trees. */
#define QMP_PHY_LEGACY_LANE_STRIDE 0x400
@@ -104,19 +80,11 @@ struct qmp_phy_init_tbl {
/* set of registers with offsets different per-PHY */
enum qphy_reg_layout {
- /* Common block control registers */
- QPHY_COM_SW_RESET,
- QPHY_COM_POWER_DOWN_CONTROL,
- QPHY_COM_START_CONTROL,
- QPHY_COM_PCS_READY_STATUS,
/* PCS registers */
QPHY_SW_RESET,
QPHY_START_CTRL,
QPHY_PCS_READY_STATUS,
- QPHY_PCS_STATUS,
QPHY_PCS_POWER_DOWN_CONTROL,
- /* PCS_MISC registers */
- QPHY_PCS_MISC_TYPEC_CTRL,
/* Keep last to ensure regs_layout arrays are properly initialized */
QPHY_LAYOUT_SIZE
};
--
2.35.1
Powered by blists - more mailing lists