| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220908143651.1252601-6-conor.dooley@microchip.com>
Date: Thu, 8 Sep 2022 15:36:52 +0100
From: Conor Dooley <conor.dooley@...rochip.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Palmer Dabbelt <palmer@...belt.com>,
Conor Dooley <conor.dooley@...rochip.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Hugh Breslin <hugh.breslin@...rochip.com>
CC: Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-riscv@...ts.infradead.org>
Subject: [PATCH v5 5/5] riscv: dts: microchip: add the mpfs' fabric clock control
The "fabric clocks" in current PolarFire SoC device trees are not
really fixed clocks. Their frequency is set by the bitstream, so having
them located in -fabric.dtsi is not a problem - they're just as "fixed"
as the IP blocks etc used in the FPGA fabric.
However, their configuration can be read at runtime (and to an extent
they can be controlled, although the intended usage is static
configurations set by the bitstream) through the system controller bus.
In the v2209 reference design a single CCC (north-west corner) is
enabled, using a 50 MHz off-chip oscillator as its reference.
Updating to the v2209 reference design is required.
Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
---
.../dts/microchip/mpfs-icicle-kit-fabric.dtsi | 27 +++++++++------
.../boot/dts/microchip/mpfs-icicle-kit.dts | 4 +++
.../dts/microchip/mpfs-polarberry-fabric.dtsi | 5 +++
arch/riscv/boot/dts/microchip/mpfs.dtsi | 34 +++++++++++++++++--
4 files changed, 58 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index 0d28858b83f2..f17cb00df467 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -2,14 +2,14 @@
/* Copyright (c) 2020-2021 Microchip Technology Inc */
/ {
- compatible = "microchip,mpfs-icicle-reference-rtlv2203", "microchip,mpfs";
+ compatible = "microchip,mpfs-icicle-reference-rtlv2209", "microchip,mpfs";
core_pwm0: pwm@...00000 {
compatible = "microchip,corepwm-rtl-v4";
reg = <0x0 0x41000000 0x0 0xF0>;
microchip,sync-update-mask = /bits/ 32 <0>;
#pwm-cells = <2>;
- clocks = <&fabric_clk3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT0>;
status = "disabled";
};
@@ -18,22 +18,29 @@ i2c2: i2c@...00000 {
reg = <0x0 0x44000000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&fabric_clk3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
interrupt-parent = <&plic>;
interrupts = <122>;
clock-frequency = <100000>;
status = "disabled";
};
- fabric_clk3: fabric-clk3 {
+ refclk_ccc: cccrefclk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <62500000>;
};
+};
- fabric_clk1: fabric-clk1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- };
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
+
+&pcie {
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT0>, <&ccc_nw CLK_CCC_PLL0_OUT1>,
+ <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic0", "fic1", "fic3";
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index f3f87ed2007f..e7bd564291d6 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -137,6 +137,10 @@ &refclk {
clock-frequency = <125000000>;
};
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
index 49380c428ec9..3beb450b4259 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -14,3 +14,8 @@ fabric_clk1: fabric-clk1 {
clock-frequency = <125000000>;
};
};
+
+&pcie {
+ clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+ clock-names = "fic0", "fic1", "fic3";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 74493344ea41..1e92adf0094e 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -236,6 +236,38 @@ clkcfg: clkcfg@...02000 {
#clock-cells = <1>;
};
+ ccc_se: clock-controller@...10000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+ <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_ne: clock-controller@...40000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+ <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_nw: clock-controller@...00000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+ <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_sw: clock-controller@...00000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+ <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
mmuart0: serial@...00000 {
compatible = "ns16550a";
reg = <0x0 0x20000000 0x0 0x400>;
@@ -480,8 +512,6 @@ pcie: pcie@...0000000 {
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
interrupt-map-mask = <0 0 0 7>;
- clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
- clock-names = "fic0", "fic1", "fic3";
ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
msi-parent = <&pcie>;
msi-controller;
--
2.36.1
Powered by blists - more mailing lists