| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220908111712.665287-11-conor.dooley@microchip.com>
Date: Thu, 8 Sep 2022 12:17:13 +0100
From: Conor Dooley <conor.dooley@...rochip.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor.dooley@...rochip.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Shravan Chippa <shravan.chippa@...rochip.com>
CC: Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Cyril Jean <Cyril.Jean@...rochip.com>,
Lewis Hanly <lewis.hanly@...rochip.com>,
Vattipalli Praveen <praveen.kumar@...rochip.com>,
Wolfgang Grandegger <wg@...es-embedded.de>,
Hugh Breslin <hugh.breslin@...rochip.com>,
<devicetree@...r.kernel.org>, <linux-riscv@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v4 10/10] riscv: dts: microchip: add a devicetree for aries' m100pfsevp
Add device trees for both configs used by the Aries Embedded
M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM,
featuring:
- 2GB DDR4 SDRAM dedicated to the HMS
- 512MB DDR4 SDRAM dedicated to the FPGA
- 32 MB SPI NOR Flash
- 4 GByte eMMC
and a carrier board with:
- 2x Gigabit Ethernet
- USB
- 2x UART
- 2x CAN
- TFT connector
- HSMC extension connector
- 3x PMOD extension connectors
- microSD-card slot
Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes
Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod
Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf
Co-developed-by: Wolfgang Grandegger <wg@...es-embedded.de>
Signed-off-by: Wolfgang Grandegger <wg@...es-embedded.de>
Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
---
arch/riscv/boot/dts/microchip/Makefile | 1 +
.../dts/microchip/mpfs-m100pfs-fabric.dtsi | 45 +++++
.../boot/dts/microchip/mpfs-m100pfsevp.dts | 179 ++++++++++++++++++
3 files changed, 225 insertions(+)
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index f18477b2e86d..7427a20934f3 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
new file mode 100644
index 000000000000..7b9ee13b6a3a
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ pcie: pcie@...0000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+ clock-names = "fic0", "fic1", "fic3";
+ ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
new file mode 100644
index 000000000000..184cb36a175e
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@...es-embedded.de>
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@...rochip.com>
+ */
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-m100pfs-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ 1000000
+
+/ {
+ model = "Aries Embedded M100PFEVPS";
+ compatible = "aries,m100pfsevp", "microchip,mpfs";
+
+ aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ gpio0 = &gpio0;
+ gpio1 = &gpio2;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ ddrc_cache_lo: memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ };
+ ddrc_cache_hi: memory@...0000000 {
+ device_type = "memory";
+ reg = <0x10 0x40000000 0x0 0x40000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&gpio0 {
+ interrupts = <13>, <14>, <15>, <16>,
+ <17>, <18>, <19>, <20>,
+ <21>, <22>, <23>, <24>,
+ <25>, <26>;
+ ngpios = <14>;
+ status = "okay";
+
+ pmic-irq-hog {
+ gpio-hog;
+ gpios = <13 0>;
+ input;
+ };
+
+ /* Set to low for eMMC, high for SD-card */
+ mmc-sel-hog {
+ gpio-hog;
+ gpios = <12 0>;
+ output-high;
+ };
+};
+
+&gpio2 {
+ interrupts = <13>, <14>, <15>, <16>,
+ <17>, <18>, <19>, <20>,
+ <21>, <22>, <23>, <24>,
+ <25>, <26>, <27>, <28>,
+ <29>, <30>, <31>, <32>,
+ <33>, <34>, <35>, <36>,
+ <37>, <38>, <39>, <40>,
+ <41>, <42>, <43>, <44>;
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&mac1 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy1>;
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ no-1-8-v;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ disable-wp;
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
--
2.36.1
Powered by blists - more mailing lists