| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220908142914.359777-3-cristian.ciocaltea@collabora.com>
Date: Thu, 8 Sep 2022 17:29:13 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Michael Zhu <michael.zhu@...rfivetech.com>,
Drew Fustini <drew@...gleboard.org>,
Emil Renner Berthing <kernel@...il.dk>,
Conor Dooley <conor.dooley@...rochip.com>
Cc: devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org, kernel@...labora.com
Subject: [PATCH v3 2/3] riscv: dts: starfive: Add common DT for JH7100 based boards
In preparation for adding initial device tree support for the StarFive
VisionFive board, which is similar with BeagleV Starlight, move most
of the content from jh7100-beaglev-starlight.dts to a new file, to be
shared between the two boards.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
---
.../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
2 files changed, 1 insertion(+), 155 deletions(-)
copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index c9af67f7a0d2..7cda3a89020a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -5,160 +5,9 @@
*/
/dts-v1/;
-#include "jh7100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/pinctrl-starfive.h>
+#include "jh7100-common.dtsi"
/ {
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
- aliases {
- serial0 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- timebase-frequency = <6250000>;
- };
-
- memory@...00000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x2 0x0>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-ack {
- gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- label = "ack";
- };
- };
-};
-
-&gpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(62, GPO_LOW,
- GPO_I2C0_PAD_SCK_OEN,
- GPI_I2C0_PAD_SCK_IN)>,
- <GPIOMUX(61, GPO_LOW,
- GPO_I2C0_PAD_SDA_OEN,
- GPI_I2C0_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c1_pins: i2c1-0 {
- i2c-pins {
- pinmux = <GPIOMUX(47, GPO_LOW,
- GPO_I2C1_PAD_SCK_OEN,
- GPI_I2C1_PAD_SCK_IN)>,
- <GPIOMUX(48, GPO_LOW,
- GPO_I2C1_PAD_SDA_OEN,
- GPI_I2C1_PAD_SDA_IN)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(60, GPO_LOW,
- GPO_I2C2_PAD_SCK_OEN,
- GPI_I2C2_PAD_SCK_IN)>,
- <GPIOMUX(59, GPO_LOW,
- GPO_I2C2_PAD_SDA_OEN,
- GPI_I2C2_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- uart3_pins: uart3-0 {
- rx-pins {
- pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
- GPI_UART3_PAD_SIN)>;
- bias-pull-up;
- drive-strength = <14>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- tx-pins {
- pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
- GPO_ENABLE, GPI_NONE)>;
- bias-disable;
- drive-strength = <35>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-};
-
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- pmic@5e {
- compatible = "ti,tps65086";
- reg = <0x5e>;
- gpio-controller;
- #gpio-cells = <2>;
-
- regulators {
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <100>;
- i2c-scl-falling-time-ns = <100>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&osc_sys {
- clock-frequency = <25000000>;
-};
-
-&osc_aud {
- clock-frequency = <27000000>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- status = "okay";
};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
similarity index 96%
copy from arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
copy to arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index c9af67f7a0d2..6a66abacb612 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -11,9 +11,6 @@
#include <dt-bindings/pinctrl/pinctrl-starfive.h>
/ {
- model = "BeagleV Starlight Beta";
- compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
aliases {
serial0 = &uart3;
};
--
2.37.3
Powered by blists - more mailing lists