| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 9 Sep 2022 20:51:52 +0200
From: Mateusz Jończyk <mat.jonczyk@...pl>
To: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-acpi@...r.kernel.org
Cc: Mateusz Jończyk <mat.jonczyk@...pl>,
Jonathan Corbet <corbet@....net>,
Bjorn Helgaas <bhelgaas@...gle.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Len Brown <lenb@...nel.org>, Borislav Petkov <bp@...e.de>
Subject: [PATCH] acpi,pci: handle duplicate IRQ routing entries returned from _PRT
On some platforms, the ACPI _PRT function returns duplicate interrupt
routing entries. Linux uses the first matching entry, but sometimes the
second matching entry contains the correct interrupt vector.
This happens on a Dell Latitude E6500 laptop with the i2c-i801 Intel
SMBus controller. This controller was nonfunctional unless its interrupt
usage was disabled (using the "disable_features=0x10" module parameter).
After investigation, it turned out that the driver was using an
incorrect interrupt vector: in lspci output for this device there was:
Interrupt: pin B routed to IRQ 19
but after running i2cdetect (without using any i2c-i801 module
parameters) the following was logged to dmesg:
[...]
[ 132.248657] i801_smbus 0000:00:1f.3: Timeout waiting for interrupt!
[ 132.248669] i801_smbus 0000:00:1f.3: Transaction timeout
[ 132.452649] i801_smbus 0000:00:1f.3: Timeout waiting for interrupt!
[ 132.452662] i801_smbus 0000:00:1f.3: Transaction timeout
[ 132.467682] irq 17: nobody cared (try booting with the "irqpoll" option)
The existence of duplicate entries returned from _PRT was confirmed in
the ACPI DSTD table, which contains:
Name (API0, Package (0x1D)
{
Package (0x04)
{
0x001FFFFF,
0x01,
0x00,
0x13
},
Package (0x04)
{
0x001FFFFF,
0x00,
0x00,
0x10
},
Package (0x04)
{
0x001FFFFF,
0x01,
0x00,
0x11
},
[...]
})
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
Local0 = API0 /* \_SB_.PCI0.API0 */
If (!GPIC)
{
Local0 = PIC0 /* \_SB_.PCI0.PIC0 */
}
Return (Local0)
}
Linux used the first matching entry, which was incorrect. In order not
to disrupt existing systems, use the first matching entry unless the
pci=prtlast kernel parameter is used or a Dell Latitude E6500 laptop is
detected.
Disclaimer: there is nothing really interesting connected to the SMBus
controller on this laptop, but this change may help other systems.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@...pl>
Cc: Jonathan Corbet <corbet@....net>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: Len Brown <lenb@...nel.org>
Cc: Borislav Petkov <bp@...e.de>
---
.../admin-guide/kernel-parameters.txt | 8 ++
drivers/acpi/pci_irq.c | 89 ++++++++++++++++++-
drivers/pci/pci.c | 9 ++
3 files changed, 102 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 426fa892d311..2ff351db10b8 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4190,6 +4190,14 @@
bridge windows. This is the default on modern
hardware. If you need to use this, please report
a bug to <linux-pci@...r.kernel.org>.
+ prtlast If the _PRT ACPI method returns duplicate
+ IRQ routing entries, use the last matching entry
+ for a given device. If the platform may be
+ affected by this problem, an error message is
+ printed to dmesg - this parameter is
+ ineffective otherwise. If you need to use this,
+ please report a bug to
+ <linux-pci@...r.kernel.org>.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 08e15774fb9f..5cead840de0b 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -196,12 +196,73 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
return 0;
}
+extern bool pci_prtlast;
+
+static const struct dmi_system_id pci_prtlast_dmi[] = {
+ {
+ .ident = "Dell Latitude E6500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6500"),
+ },
+ },
+ { }
+};
+
+static bool acpi_pci_prt_use_last(struct acpi_prt_entry *curr,
+ const char *current_source,
+ const char *previous_match_source,
+ int previous_match_index)
+{
+ bool ret;
+ const struct dmi_system_id *id;
+ const int msg_bufsize = 512;
+ char *msg = kmalloc(msg_bufsize, GFP_KERNEL);
+
+ if (!msg)
+ return false;
+
+ snprintf(msg, msg_bufsize,
+ FW_BUG
+ "ACPI _PRT returned duplicate IRQ routing entries for PCI device "
+ "%04x:%02x:%02x[INT%c]: %s[%d] and %s[%d]. ",
+ curr->id.segment, curr->id.bus, curr->id.device,
+ pin_name(curr->pin),
+ previous_match_source, previous_match_index,
+ current_source, curr->index);
+
+ id = dmi_first_match(pci_prtlast_dmi);
+
+ if (id) {
+ pr_warn("%s%s detected, using last entry.\n",
+ msg, id->ident);
+
+ ret = true;
+ } else if (pci_prtlast) {
+ pr_err(
+"%sUsing last entry, as directed on the command line. If this helps, report a bug.\n",
+ msg);
+
+ ret = true;
+ } else {
+ pr_err("%sIf necessary, use \"pci=prtlast\" and report a bug.\n",
+ msg);
+
+ ret = false;
+ }
+
+ kfree(msg);
+ return ret;
+}
+
static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
- int pin, struct acpi_prt_entry **entry_ptr)
+ int pin, struct acpi_prt_entry **entry_ptr_out)
{
acpi_status status;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_pci_routing_table *entry;
+ struct acpi_prt_entry *match = NULL;
+ const char *match_source = NULL;
acpi_handle handle = NULL;
if (dev->bus->bridge)
@@ -219,13 +280,33 @@ static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
entry = buffer.pointer;
while (entry && (entry->length > 0)) {
- if (!acpi_pci_irq_check_entry(handle, dev, pin,
- entry, entry_ptr))
- break;
+ struct acpi_prt_entry *curr;
+
+ if (!acpi_pci_irq_check_entry(handle, dev, pin, entry, &curr)) {
+ if (!match) {
+ // first match
+ match = curr;
+ match_source = entry->source;
+ } else if (!acpi_pci_prt_use_last(curr,
+ entry->source,
+ match_source,
+ match->index)) {
+ // duplicates found, use first entry
+ kfree(curr);
+ } else {
+ // duplicates found, use last entry
+ kfree(match);
+ match = curr;
+ match_source = entry->source;
+ }
+ }
+
entry = (struct acpi_pci_routing_table *)
((unsigned long)entry + entry->length);
}
+ *entry_ptr_out = match;
+
kfree(buffer.pointer);
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 95bc329e74c0..a14a2e4e4197 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -155,6 +155,11 @@ static bool pci_bridge_d3_disable;
/* Force bridge_d3 for all PCIe ports */
static bool pci_bridge_d3_force;
+#ifdef CONFIG_ACPI
+/* Use the last matching entry from the table returned by the _PRT ACPI method. */
+bool pci_prtlast;
+#endif
+
static int __init pcie_port_pm_setup(char *str)
{
if (!strcmp(str, "off"))
@@ -6896,6 +6901,10 @@ static int __init pci_setup(char *str)
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
} else if (!strncmp(str, "disable_acs_redir=", 18)) {
disable_acs_redir_param = str + 18;
+#ifdef CONFIG_ACPI
+ } else if (!strncmp(str, "prtlast", 7)) {
+ pci_prtlast = true;
+#endif
} else {
pr_err("PCI: Unknown option `%s'\n", str);
}
base-commit: 7e18e42e4b280c85b76967a9106a13ca61c16179
--
2.25.1
Powered by blists - more mailing lists