[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 9 Sep 2022 09:27:51 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Jun Li <jun.li@....com>
Cc: Alexander Stein <alexander.stein@...tq-group.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/4] USB host support for TQMa8MPxL + MBa8MPxL
On Thu, Sep 08, 2022 at 09:07:06AM +0000, Jun Li wrote:
> Hi,
>
> > -----Original Message-----
> > From: Alexander Stein <alexander.stein@...tq-group.com>
> > Sent: Thursday, September 8, 2022 1:50 PM
> > To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>; Rob Herring
> > <robh+dt@...nel.org>; Krzysztof Kozlowski
> > <krzysztof.kozlowski+dt@...aro.org>; Shawn Guo <shawnguo@...nel.org>;
> > Sascha Hauer <s.hauer@...gutronix.de>; Pengutronix Kernel Team
> > <kernel@...gutronix.de>; Fabio Estevam <festevam@...il.com>; dl-linux-imx
> > <linux-imx@....com>; Jun Li <jun.li@....com>
> > Cc: linux-usb@...r.kernel.org; devicetree@...r.kernel.org;
> > linux-kernel@...r.kernel.org
> > Subject: RE: [PATCH 0/4] USB host support for TQMa8MPxL + MBa8MPxL
> >
> > Hi,
> >
> > Am Mittwoch, 7. September 2022, 18:08:25 CEST schrieb Jun Li:
> > > Hi
> > >
> > > > -----Original Message-----
> > > > From: Alexander Stein <alexander.stein@...tq-group.com>
> > > > Sent: Wednesday, September 7, 2022 10:46 PM
> > > > To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>; Rob Herring
> > > > <robh+dt@...nel.org>; Krzysztof Kozlowski
> > > > <krzysztof.kozlowski+dt@...aro.org>; Shawn Guo
> > > > <shawnguo@...nel.org>; Sascha Hauer <s.hauer@...gutronix.de>;
> > > > Pengutronix Kernel Team <kernel@...gutronix.de>; Fabio Estevam
> > > > <festevam@...il.com>; dl-linux-imx <linux-imx@....com>; Jun Li
> > > > <jun.li@....com>
> > > > Cc: Alexander Stein <alexander.stein@...tq-group.com>;
> > > > linux-usb@...r.kernel.org; devicetree@...r.kernel.org;
> > > > linux-kernel@...r.kernel.org
> > > > Subject: [PATCH 0/4] USB host support for TQMa8MPxL + MBa8MPxL
> > > >
> > > > Hi everybody,
> > > >
> > > > this is a series based on the RFC at [1] for USB host support on
> > > > TQMa8MPxL
> > > > + MBa8MPxL. The main difference is that USB DR support has already
> > > > + been
> > > > added and has been removed from this series.
> > > >
> > > > The DT configuration itself (patch 4) is rather straight forward,
> > > > but leads
> > > >
> > > > to the following dmesg errors regarding superspeed ports:
> > > > > [ 8.549243] hub 2-1:1.0: hub_ext_port_status failed (err = -110)
> > > > > [ 22.885263] usb 2-1: Failed to suspend device, error -110
> > > >
> > > > This hardware works fine using the downstream kernel, because for
> > > > imx8mp this ITP sync feature is enabled conditionally [2] & [3].
> > > > Hacking this into mainline resulted in a working superspeed setup as
> > well.
> > > > I also noticed that on some android kernel [4] depending in IP core
> > > > version either GCTL.SOFTITPSYNC or GFLADJ.GFLADJ_REFCLK_LPM_SEL is
> > > > enabled unconditionally.
> > > > So I opted for the latter one using some quirk (patch 1-3).
> > > >
> > > > I have to admit I do not know what this is actually about, nor why
> > > > my setup does not work without this change or why this fixed my
> > > > problem. So maybe someone with more knowledge can say if this is the
> > > > way to go or what this is about.
> > >
> > > This can be updated:)
> > >
> > > > I also added snps,dis_u3_susphy_quirk to the board level as for some
> > > > reason USB Superspeed U3 does not work. Detecting the onboard hub
> > > > takes much longer and once all devices are diconnected from the hub
> > > > it is put into runtime suspend (U3) and new attached devices are not
> > > > detected at all.
> > > > Until the cause is known and fixed runtime suspend has to be disabled.
> > >
> > > For this issue you are reporting, I am not sure if this is caused by a
> > > USB clock change merged on v5.19, if you use latest kernel, can you
> > > try with below patches applied to see if U3 can work for you?
> >
> > Awesome, This does the trick!
> > I was already running with patches [1] & [2], but was missing patch [3].
> > With all of them applied, USB detects a newly attached superspeed device
> > when the HUB is in runtime suspend (U3).
>
> Yes, patch[3] needs to apply with patches [1]&[2], I am applying the
> same tag to make sure the 3 patches land on the same target release
> as they will go through diff maintainer's trees.
What "tag"?
And I'm confused as to the status of all of these, please resend the
series once you have a new version with the proper acked and reviewed-by
added.
thanks,
greg k-h
Powered by blists - more mailing lists