[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <61d591ff-c5d8-a032-9eaa-6ab4c535a679@quicinc.com>
Date: Mon, 12 Sep 2022 12:26:03 -0700
From: Kuogee Hsieh <quic_khsieh@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
<dri-devel@...ts.freedesktop.org>, <robdclark@...il.com>,
<sean@...rly.run>, <swboyd@...omium.org>, <dianders@...omium.org>,
<vkoul@...nel.org>, <daniel@...ll.ch>, <airlied@...ux.ie>,
<agross@...nel.org>, <bjorn.andersson@...aro.org>
CC: <quic_abhinavk@...cinc.com>, <quic_sbillaka@...cinc.com>,
<freedreno@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 3/3] drm/msm/dp: retry 3 times if set sink to D0 poweer
state failed
On 9/12/2022 11:37 AM, Dmitry Baryshkov wrote:
> On 12/09/2022 19:23, Kuogee Hsieh wrote:
>> Bring sink out of D3 (power down) mode into D0 (normal operation) mode
>> by setting DP_SET_POWER_D0 bit to DP_SET_POWER dpcd register. This
>> patch will retry 3 times if written to DP_SET_POWER register failed.
>
> Could you please elaborate this change? Can the sink succeed in
> reading the DP_SET_POWER, but fail writing DP_SET_POWER?
yes, there is possible since it is not only set local sink device but
also all downstream sink devices to D0 state.
>
>>
>> Changes in v5:
>> -- split into two patches
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
>> ---
>> drivers/gpu/drm/msm/dp/dp_link.c | 13 ++++++++-----
>> 1 file changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> index 9d5381d..4360728 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -50,6 +50,7 @@ static int dp_aux_link_power_up(struct drm_dp_aux
>> *aux,
>> {
>> u8 value;
>> ssize_t len;
>> + int i;
>> if (link->revision < 0x11)
>> return 0;
>> @@ -61,11 +62,13 @@ static int dp_aux_link_power_up(struct drm_dp_aux
>> *aux,
>> value &= ~DP_SET_POWER_MASK;
>> value |= DP_SET_POWER_D0;
>> - len = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
>> - if (len < 0)
>> - return len;
>> -
>> - usleep_range(1000, 2000);
>> + /* retry for 1ms to give the sink time to wake up */
>> + for (i = 0; i < 3; i++) {
>> + len = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
>> + usleep_range(1000, 2000);
>> + if (len == 1)
>> + break;
>> + }
>> return 0;
>> }
>
Powered by blists - more mailing lists