[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220912194028.3584378-1-bhupesh.sharma@linaro.org>
Date: Tue, 13 Sep 2022 01:10:27 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: bhupesh.sharma@...aro.org, bhupesh.linux@...il.com,
andersson@...nel.org, linux-arm-msm@...r.kernel.org,
daniel.lezcano@...aro.org, rafael@...nel.org,
dmitry.baryshkov@...aro.org, Amit Kucheria <amitk@...nel.org>,
Thara Gopinath <thara.gopinath@...il.com>
Subject: [PATCH v2 1/2] thermal: Introduce CONFIG_QCOM_THERMAL in Makefile and qcom/Kconfig
Introduce CONFIG_QCOM_THERMAL to allow better control
over selection of various Qualcomm Thermal drivers
available inside qcom/ directory.
This is a preparatory change to allow new drivers to
be added inside qcom/ directory in a more structured
fashion later-on.
Cc: Bjorn Andersson <andersson@...nel.org>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: Amit Kucheria <amitk@...nel.org>
Cc: Thara Gopinath <thara.gopinath@...il.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
---
- v1 can be viewed here: https://www.spinics.net/lists/kernel/msg4510793.html
- Fixed review comments from Dmitry received in v1.
drivers/thermal/Makefile | 2 +-
drivers/thermal/qcom/Kconfig | 12 ++++++++++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index def8e1a0399c..2506c6c8ca83 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
obj-y += intel/
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-y += st/
-obj-$(CONFIG_QCOM_TSENS) += qcom/
+obj-y += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 2c7f3f9a26eb..ccfd090273c1 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -1,8 +1,17 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config QCOM_THERMAL
+ tristate "Thermal drivers on Qualcomm Snapdragon series of SoCs"
+ help
+ Support for thermal drivers on Qualcomm Snapdragon series of SoCs.
+ There are several thermal sensors available on the Qualcomm Socs
+ which can be used for thermal mitigation purposes.
+
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
depends on NVMEM_QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
+ select QCOM_THERMAL
help
This enables the thermal sysfs driver for the TSENS device. It shows
up in Sysfs as a thermal zone with multiple trip points. Disabling the
@@ -15,6 +24,7 @@ config QCOM_SPMI_ADC_TM5
depends on OF && SPMI && IIO
select REGMAP_SPMI
select QCOM_VADC_COMMON
+ select QCOM_THERMAL
help
This enables the thermal driver for the ADC thermal monitoring
device. It shows up as a thermal zone with multiple trip points.
@@ -25,6 +35,7 @@ config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
select REGMAP_SPMI
+ select QCOM_THERMAL
help
This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
PMIC devices. It shows up in sysfs as a thermal sensor with multiple
@@ -35,6 +46,7 @@ config QCOM_SPMI_TEMP_ALARM
config QCOM_LMH
tristate "Qualcomm Limits Management Hardware"
depends on ARCH_QCOM && QCOM_SCM
+ select QCOM_THERMAL
help
This enables initialization of Qualcomm limits management
hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
--
2.37.1
Powered by blists - more mailing lists