[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220912215312.964722-1-tharvey@gateworks.com>
Date: Mon, 12 Sep 2022 14:53:12 -0700
From: Tim Harvey <tharvey@...eworks.com>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: NXP Linux Team <linux-imx@....com>,
Fabio Estevam <festevam@...il.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH] ARM: dts: imx6qdl-gw52xx: add CAN regulator
The GW52xx has a tranceiver with a STBY pin connected to an IMX6 GPIO.
Configure this as a regulator to drive it low when CAN is in use.
Signed-off-by: Tim Harvey <tharvey@...eworks.com>
---
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b1df2beb2832..ec6b55bf77d9 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -137,6 +137,16 @@ reg_5p0v: regulator-5p0v {
regulator-always-on;
};
+ reg_can1_stby: regulator-can1-stby {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_can1>;
+ compatible = "regulator-fixed";
+ regulator-name = "can1_stby";
+ gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
@@ -170,6 +180,7 @@ &audmux {
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
status = "okay";
};
@@ -612,7 +623,6 @@ pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
>;
};
@@ -702,6 +712,12 @@ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
+ pinctrl_reg_can1: regcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
--
2.25.1
Powered by blists - more mailing lists