[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220913122428.374280-3-angelogioacchino.delregno@collabora.com>
Date: Tue, 13 Sep 2022 14:24:27 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: joro@...tes.org
Cc: yong.wu@...iatek.com, will@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, matthias.bgg@...il.com,
iommu@...ts.linux-foundation.org,
linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
martin.botka@...ainline.org, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org, paul.bouchara@...ainline.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Subject: [PATCH v5 2/3] iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
In preparation for adding support for MT6795, add a new flag named
TF_PORT_TO_ADDR_MT8173 and use that instead of checking for m4u_plat
type in mtk_iommu_hw_init() to avoid seeing a long list of m4u_plat
checks there in the future.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Reviewed-by: Yong Wu <yong.wu@...iatek.com>
---
drivers/iommu/mtk_iommu.c | 6 ++++--
drivers/memory/mtk-smi.c | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7e363b1f24df..b511359376f4 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -138,6 +138,7 @@
#define PM_CLK_AO BIT(15)
#define IFA_IOMMU_PCIE_SUPPORT BIT(16)
#define PGTABLE_PA_35_EN BIT(17)
+#define TF_PORT_TO_ADDR_MT8173 BIT(18)
#define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask) \
((((pdata)->flags) & (mask)) == (_x))
@@ -955,7 +956,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int ban
* Global control settings are in bank0. May re-init these global registers
* since no sure if there is bank0 consumers.
*/
- if (data->plat_data->m4u_plat == M4U_MT8173) {
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, TF_PORT_TO_ADDR_MT8173)) {
regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
} else {
@@ -1427,7 +1428,8 @@ static const struct mtk_iommu_plat_data mt8167_data = {
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI |
- HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM,
+ HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM |
+ TF_PORT_TO_ADDR_MT8173,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.banks_num = 1,
.banks_enable = {true},
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 5a9754442bc7..cd415ed1f4ca 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -462,6 +462,7 @@ static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
if (ret) {
/* TODO: Reset this larb if it fails here. */
dev_err(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+ ret = -EAGAIN;
}
return ret;
}
--
2.37.2
Powered by blists - more mailing lists