linux-kernel - [PATCH v5 0/3] Add Richtek RT9471 3A battery charger support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1663173015-7934-1-git-send-email-u0084500@gmail.com>
Date:   Thu, 15 Sep 2022 00:30:12 +0800
From:   cy_huang <u0084500@...il.com>
To:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        sre@...nel.org
Cc:     mazziesaccount@...il.com, alina_yu@...htek.com,
        cy_huang@...htek.com, alinayu829@...il.com,
        linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v5 0/3] Add Richtek RT9471 3A battery charger support

From: ChiYuan Huang <cy_huang@...htek.com>

This patch set is to add Richtek RT9471 charger support.

The RT9471/D is a highly-integrated 3A switch mode battery charge management
and system power path management device for single cell Li-Ion and Li-polymer
battery. The low impedance power path optimizes switch-mode operation
efficiency, reduces battery charging time and extends battery life during
discharging phase.

Since v5:
- Remove one line wrapper.
- Merge header content into source file, remove header file.
- Remove 'charge_term_enable' sysfs entry and merge it into
  'charge_term_current' property control.
- Change MODULE_LICENSE from 'GPL v2' to 'GPL'.
  Following by the below discussion
  https://lore.kernel.org/all/YxAVAt2eWB3NFlrk@google.com/
- Recover all the change in sysfs-class-power.
- New a sysfs-class-power-rt9471 file.
- Remove 'charge_term_enable' sysfs entry, directly integrate it in
  'charge_term_current' power supply property control.

Since v4:
- Remove the line for the owner field in driver.
- Add the documentation for sysfs entries.

Since v3:
- Move unevaluatedProperties line after $ref for binding patch.
- Add Reviewed-by tag for binding patch.

Since v2:
- Remove the properties for interrupt controller things in the binding documentation.
- Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
- Add regulator min/max microamp to allow otg vbus current adjustable in example.
- Specify the active-level for charge-enable-gpios in binding example.
- Fix checkpatch error about 'foo * bar' to 'foo *bar' in psy_device_to_chip function.
- Specify the member name directly for the use of linear range.

ChiYuan Huang (3):
  dt-bindings: power: supply: Add Richtek RT9471 battery charger
  power: supply: rt9471: Add Richtek RT9471 charger driver
  Documentation: power: rt9471: Document exported sysfs entries

 Documentation/ABI/testing/sysfs-class-power-rt9471 |  29 +
 .../bindings/power/supply/richtek,rt9471.yaml      |  73 ++
 drivers/power/supply/Kconfig                       |  16 +
 drivers/power/supply/Makefile                      |   1 +
 drivers/power/supply/rt9471.c                      | 937 +++++++++++++++++++++
 5 files changed, 1056 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-power-rt9471
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
 create mode 100644 drivers/power/supply/rt9471.c

-- 
2.7.4