| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220914033702.6qa7z22r6xn26upx@builder.lan>
Date: Tue, 13 Sep 2022 22:37:02 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: qcom: ipq8064: reorganize node order and
sort them
On Mon, Aug 08, 2022 at 04:07:42PM +0200, Christian Marangi wrote:
> On Mon, Jul 18, 2022 at 05:38:14PM +0200, Christian Marangi wrote:
> > Reorganize node order and sort them by address.
> >
>
> So how to proceed with this? Should I send v2 with the changes pointed
> (stuff with no reg outside soc) or it's a NACK for the unnecessary
> changes?
>
> I feel a bit stuck.
>
Afaict the pieces pointed out existed before the shuffle as well, so
I've merged the two patches. Please submit additional cleanups on top.
Thank you,
Bjorn
> > Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> > ---
> >
> > This was picked from for-next qcom branch [1]. Reorganize dtsi as requested.
> >
> > [1] https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/?h=for-next
> >
> > arch/arm/boot/dts/qcom-ipq8064.dtsi | 766 ++++++++++++++--------------
> > 1 file changed, 383 insertions(+), 383 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > index da90f7c08d75..cf41d330c920 100644
> > --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > @@ -332,19 +332,59 @@ soc: soc {
> > ranges;
> > compatible = "simple-bus";
> >
> > - lpass@...00000 {
> > - compatible = "qcom,lpass-cpu";
> > - status = "disabled";
> > - clocks = <&lcc AHBIX_CLK>,
> > - <&lcc MI2S_OSR_CLK>,
> > - <&lcc MI2S_BIT_CLK>;
> > - clock-names = "ahbix-clk",
> > - "mi2s-osr-clk",
> > - "mi2s-bit-clk";
> > - interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
> > - interrupt-names = "lpass-irq-lpaif";
> > - reg = <0x28100000 0x10000>;
> > - reg-names = "lpass-lpaif";
> > + stmmac_axi_setup: stmmac-axi-config {
> > + snps,wr_osr_lmt = <7>;
> > + snps,rd_osr_lmt = <7>;
> > + snps,blen = <16 0 0 0 0 0 0>;
> > + };
> > +
> > + vsdcc_fixed: vsdcc-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "SDCC Power";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + };
> > +
> > + rpm: rpm@...000 {
> > + compatible = "qcom,rpm-ipq8064";
> > + reg = <0x108000 0x1000>;
> > + qcom,ipc = <&l2cc 0x8 2>;
> > +
> > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "ack", "err", "wakeup";
> > +
> > + clocks = <&gcc RPM_MSG_RAM_H_CLK>;
> > + clock-names = "ram";
> > +
> > + rpmcc: clock-controller {
> > + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
> > + #clock-cells = <1>;
> > + };
> > + };
> > +
> > + qcom,ssbi@...000 {
> > + compatible = "qcom,ssbi";
> > + reg = <0x00500000 0x1000>;
> > + qcom,controller-type = "pmic-arbiter";
> > + };
> > +
> > + qfprom: qfprom@...000 {
> > + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
> > + reg = <0x00700000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + speedbin_efuse: speedbin@c0 {
> > + reg = <0xc0 0x4>;
> > + };
> > + tsens_calib: calib@400 {
> > + reg = <0x400 0xb>;
> > + };
> > + tsens_calib_backup: calib_backup@410 {
> > + reg = <0x410 0xb>;
> > + };
> > };
> >
> > qcom_pinmux: pinmux@...000 {
> > @@ -471,6 +511,35 @@ mux {
> > };
> > };
> >
> > + gcc: clock-controller@...000 {
> > + compatible = "qcom,gcc-ipq8064", "syscon";
> > + clocks = <&pxo_board>, <&cxo_board>;
> > + clock-names = "pxo", "cxo";
> > + reg = <0x00900000 0x4000>;
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > + #power-domain-cells = <1>;
> > +
> > + tsens: thermal-sensor@...000 {
> > + compatible = "qcom,ipq8064-tsens";
> > +
> > + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
> > + nvmem-cell-names = "calib", "calib_backup";
> > + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "uplow";
> > +
> > + #qcom,sensors = <11>;
> > + #thermal-sensor-cells = <1>;
> > + };
> > + };
> > +
> > + sfpb_mutex: hwlock@...0600 {
> > + compatible = "qcom,sfpb-mutex";
> > + reg = <0x01200600 0x100>;
> > +
> > + #hwlock-cells = <1>;
> > + };
> > +
> > intc: interrupt-controller@...0000 {
> > compatible = "qcom,msm-qgic2";
> > interrupt-controller;
> > @@ -500,46 +569,198 @@ IRQ_TYPE_EDGE_RISING)>,
> > cpu-offset = <0x80000>;
> > };
> >
> > + l2cc: clock-controller@...1000 {
> > + compatible = "qcom,kpss-gcc", "syscon";
> > + reg = <0x2011000 0x1000>;
> > + clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
> > + clock-names = "pll8_vote", "pxo";
> > + clock-output-names = "acpu_l2_aux";
> > + };
> > +
> > acc0: clock-controller@...8000 {
> > compatible = "qcom,kpss-acc-v1";
> > reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
> > };
> >
> > + saw0: regulator@...9000 {
> > + compatible = "qcom,saw2";
> > + reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
> > + regulator;
> > + };
> > +
> > acc1: clock-controller@...8000 {
> > compatible = "qcom,kpss-acc-v1";
> > reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
> > };
> >
> > - adm_dma: dma-controller@...00000 {
> > - compatible = "qcom,adm";
> > - reg = <0x18300000 0x100000>;
> > - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> > - #dma-cells = <1>;
> > + saw1: regulator@...9000 {
> > + compatible = "qcom,saw2";
> > + reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
> > + regulator;
> > + };
> >
> > - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
> > - clock-names = "core", "iface";
> > + nss_common: syscon@...00000 {
> > + compatible = "syscon";
> > + reg = <0x03000000 0x0000FFFF>;
> > + };
> >
> > - resets = <&gcc ADM0_RESET>,
> > - <&gcc ADM0_PBUS_RESET>,
> > - <&gcc ADM0_C0_RESET>,
> > - <&gcc ADM0_C1_RESET>,
> > - <&gcc ADM0_C2_RESET>;
> > - reset-names = "clk", "pbus", "c0", "c1", "c2";
> > - qcom,ee = <0>;
> > + usb3_0: usb3@...f8800 {
> > + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x100f8800 0x8000>;
> > + clocks = <&gcc USB30_0_MASTER_CLK>;
> > + clock-names = "core";
> > +
> > + ranges;
> > +
> > + resets = <&gcc USB30_0_MASTER_RESET>;
> > + reset-names = "master";
> >
> > status = "disabled";
> > +
> > + dwc3_0: dwc3@...00000 {
> > + compatible = "snps,dwc3";
> > + reg = <0x10000000 0xcd00>;
> > + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> > + phys = <&hs_phy_0>, <&ss_phy_0>;
> > + phy-names = "usb2-phy", "usb3-phy";
> > + dr_mode = "host";
> > + snps,dis_u3_susphy_quirk;
> > + };
> > };
> >
> > - saw0: regulator@...9000 {
> > - compatible = "qcom,saw2";
> > - reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
> > - regulator;
> > + hs_phy_0: phy@...f8800 {
> > + compatible = "qcom,ipq806x-usb-phy-hs";
> > + reg = <0x100f8800 0x30>;
> > + clocks = <&gcc USB30_0_UTMI_CLK>;
> > + clock-names = "ref";
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > };
> >
> > - saw1: regulator@...9000 {
> > - compatible = "qcom,saw2";
> > - reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
> > - regulator;
> > + ss_phy_0: phy@...f8830 {
> > + compatible = "qcom,ipq806x-usb-phy-ss";
> > + reg = <0x100f8830 0x30>;
> > + clocks = <&gcc USB30_0_MASTER_CLK>;
> > + clock-names = "ref";
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + usb3_1: usb3@...f8800 {
> > + compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x110f8800 0x8000>;
> > + clocks = <&gcc USB30_1_MASTER_CLK>;
> > + clock-names = "core";
> > +
> > + ranges;
> > +
> > + resets = <&gcc USB30_1_MASTER_RESET>;
> > + reset-names = "master";
> > +
> > + status = "disabled";
> > +
> > + dwc3_1: dwc3@...00000 {
> > + compatible = "snps,dwc3";
> > + reg = <0x11000000 0xcd00>;
> > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > + phys = <&hs_phy_1>, <&ss_phy_1>;
> > + phy-names = "usb2-phy", "usb3-phy";
> > + dr_mode = "host";
> > + snps,dis_u3_susphy_quirk;
> > + };
> > + };
> > +
> > + hs_phy_1: phy@...f8800 {
> > + compatible = "qcom,ipq806x-usb-phy-hs";
> > + reg = <0x110f8800 0x30>;
> > + clocks = <&gcc USB30_1_UTMI_CLK>;
> > + clock-names = "ref";
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + ss_phy_1: phy@...f8830 {
> > + compatible = "qcom,ipq806x-usb-phy-ss";
> > + reg = <0x110f8830 0x30>;
> > + clocks = <&gcc USB30_1_MASTER_CLK>;
> > + clock-names = "ref";
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
> > + };
> > +
> > + sdcc3bam: dma-controller@...82000 {
> > + compatible = "qcom,bam-v1.3.0";
> > + reg = <0x12182000 0x8000>;
> > + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc SDC3_H_CLK>;
> > + clock-names = "bam_clk";
> > + #dma-cells = <1>;
> > + qcom,ee = <0>;
> > + };
> > +
> > + sdcc1bam: dma-controller@...02000 {
> > + compatible = "qcom,bam-v1.3.0";
> > + reg = <0x12402000 0x8000>;
> > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc SDC1_H_CLK>;
> > + clock-names = "bam_clk";
> > + #dma-cells = <1>;
> > + qcom,ee = <0>;
> > + };
> > +
> > + amba: amba {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + sdcc3: mmc@...80000 {
> > + compatible = "arm,pl18x", "arm,primecell";
> > + arm,primecell-periphid = <0x00051180>;
> > + status = "disabled";
> > + reg = <0x12180000 0x2000>;
> > + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "cmd_irq";
> > + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
> > + clock-names = "mclk", "apb_pclk";
> > + bus-width = <8>;
> > + cap-sd-highspeed;
> > + cap-mmc-highspeed;
> > + max-frequency = <192000000>;
> > + sd-uhs-sdr104;
> > + sd-uhs-ddr50;
> > + vqmmc-supply = <&vsdcc_fixed>;
> > + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
> > + dma-names = "tx", "rx";
> > + };
> > +
> > + sdcc1: mmc@...00000 {
> > + status = "disabled";
> > + compatible = "arm,pl18x", "arm,primecell";
> > + arm,primecell-periphid = <0x00051180>;
> > + reg = <0x12400000 0x2000>;
> > + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "cmd_irq";
> > + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
> > + clock-names = "mclk", "apb_pclk";
> > + bus-width = <8>;
> > + max-frequency = <96000000>;
> > + non-removable;
> > + cap-sd-highspeed;
> > + cap-mmc-highspeed;
> > + mmc-ddr-1_8v;
> > + vmmc-supply = <&vsdcc_fixed>;
> > + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
> > + dma-names = "tx", "rx";
> > + };
> > };
> >
> > gsbi1: gsbi@...40000 {
> > @@ -654,56 +875,6 @@ i2c@...80000 {
> > };
> > };
> >
> > - gsbi5: gsbi@...00000 {
> > - compatible = "qcom,gsbi-v1.0.0";
> > - cell-index = <5>;
> > - reg = <0x1a200000 0x100>;
> > - clocks = <&gcc GSBI5_H_CLK>;
> > - clock-names = "iface";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - ranges;
> > - status = "disabled";
> > -
> > - syscon-tcsr = <&tcsr>;
> > -
> > - gsbi5_serial: serial@...40000 {
> > - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> > - reg = <0x1a240000 0x1000>,
> > - <0x1a200000 0x1000>;
> > - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
> > - clock-names = "core", "iface";
> > - status = "disabled";
> > - };
> > -
> > - i2c@...80000 {
> > - compatible = "qcom,i2c-qup-v1.1.1";
> > - reg = <0x1a280000 0x1000>;
> > - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> > -
> > - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> > - clock-names = "core", "iface";
> > - status = "disabled";
> > -
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - };
> > -
> > - spi@...80000 {
> > - compatible = "qcom,spi-qup-v1.1.1";
> > - reg = <0x1a280000 0x1000>;
> > - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> > -
> > - clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> > - clock-names = "core", "iface";
> > - status = "disabled";
> > -
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - };
> > - };
> > -
> > gsbi6: gsbi@...00000 {
> > compatible = "qcom,gsbi-v1.0.0";
> > reg = <0x16500000 0x100>;
> > @@ -784,149 +955,119 @@ gsbi7_i2c: i2c@...80000 {
> > };
> > };
> >
> > - rng@...00000 {
> > - compatible = "qcom,prng";
> > - reg = <0x1a500000 0x200>;
> > - clocks = <&gcc PRNG_CLK>;
> > - clock-names = "core";
> > - };
> > + adm_dma: dma-controller@...00000 {
> > + compatible = "qcom,adm";
> > + reg = <0x18300000 0x100000>;
> > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> > + #dma-cells = <1>;
> >
> > - sata_phy: sata-phy@...00000 {
> > - compatible = "qcom,ipq806x-sata-phy";
> > - reg = <0x1b400000 0x200>;
> > + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
> > + clock-names = "core", "iface";
> >
> > - clocks = <&gcc SATA_PHY_CFG_CLK>;
> > - clock-names = "cfg";
> > + resets = <&gcc ADM0_RESET>,
> > + <&gcc ADM0_PBUS_RESET>,
> > + <&gcc ADM0_C0_RESET>,
> > + <&gcc ADM0_C1_RESET>,
> > + <&gcc ADM0_C2_RESET>;
> > + reset-names = "clk", "pbus", "c0", "c1", "c2";
> > + qcom,ee = <0>;
> >
> > - #phy-cells = <0>;
> > status = "disabled";
> > };
> >
> > - nand: nand-controller@...00000 {
> > - compatible = "qcom,ipq806x-nand";
> > - reg = <0x1ac00000 0x800>;
> > -
> > - pinctrl-0 = <&nand_pins>;
> > - pinctrl-names = "default";
> > -
> > - clocks = <&gcc EBI2_CLK>,
> > - <&gcc EBI2_AON_CLK>;
> > - clock-names = "core", "aon";
> > -
> > - dmas = <&adm_dma 3>;
> > - dma-names = "rxtx";
> > - qcom,cmd-crci = <15>;
> > - qcom,data-crci = <3>;
> > -
> > + gsbi5: gsbi@...00000 {
> > + compatible = "qcom,gsbi-v1.0.0";
> > + cell-index = <5>;
> > + reg = <0x1a200000 0x100>;
> > + clocks = <&gcc GSBI5_H_CLK>;
> > + clock-names = "iface";
> > #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > + #size-cells = <1>;
> > + ranges;
> > status = "disabled";
> > - };
> >
> > - sata: sata@...00000 {
> > - compatible = "qcom,ipq806x-ahci", "generic-ahci";
> > - reg = <0x29000000 0x180>;
> > + syscon-tcsr = <&tcsr>;
> >
> > - interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> > + gsbi5_serial: serial@...40000 {
> > + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> > + reg = <0x1a240000 0x1000>,
> > + <0x1a200000 0x1000>;
> > + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
> > + clock-names = "core", "iface";
> > + status = "disabled";
> > + };
> >
> > - clocks = <&gcc SFAB_SATA_S_H_CLK>,
> > - <&gcc SATA_H_CLK>,
> > - <&gcc SATA_A_CLK>,
> > - <&gcc SATA_RXOOB_CLK>,
> > - <&gcc SATA_PMALIVE_CLK>;
> > - clock-names = "slave_face", "iface", "core",
> > - "rxoob", "pmalive";
> > + i2c@...80000 {
> > + compatible = "qcom,i2c-qup-v1.1.1";
> > + reg = <0x1a280000 0x1000>;
> > + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> >
> > - assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
> > - assigned-clock-rates = <100000000>, <100000000>;
> > + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> > + clock-names = "core", "iface";
> > + status = "disabled";
> >
> > - phys = <&sata_phy>;
> > - phy-names = "sata-phy";
> > - status = "disabled";
> > - };
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> >
> > - qcom,ssbi@...000 {
> > - compatible = "qcom,ssbi";
> > - reg = <0x00500000 0x1000>;
> > - qcom,controller-type = "pmic-arbiter";
> > - };
> > + spi@...80000 {
> > + compatible = "qcom,spi-qup-v1.1.1";
> > + reg = <0x1a280000 0x1000>;
> > + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> >
> > - qfprom: qfprom@...000 {
> > - compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
> > - reg = <0x00700000 0x1000>;
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - speedbin_efuse: speedbin@c0 {
> > - reg = <0xc0 0x4>;
> > - };
> > - tsens_calib: calib@400 {
> > - reg = <0x400 0xb>;
> > - };
> > - tsens_calib_backup: calib_backup@410 {
> > - reg = <0x410 0xb>;
> > + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
> > + clock-names = "core", "iface";
> > + status = "disabled";
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > };
> > };
> >
> > - gcc: clock-controller@...000 {
> > - compatible = "qcom,gcc-ipq8064", "syscon";
> > - clocks = <&pxo_board>, <&cxo_board>;
> > - clock-names = "pxo", "cxo";
> > - reg = <0x00900000 0x4000>;
> > - #clock-cells = <1>;
> > - #reset-cells = <1>;
> > - #power-domain-cells = <1>;
> > -
> > - tsens: thermal-sensor@...000 {
> > - compatible = "qcom,ipq8064-tsens";
> > -
> > - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
> > - nvmem-cell-names = "calib", "calib_backup";
> > - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "uplow";
> > + tcsr: syscon@...00000 {
> > + compatible = "qcom,tcsr-ipq8064", "syscon";
> > + reg = <0x1a400000 0x100>;
> > + };
> >
> > - #qcom,sensors = <11>;
> > - #thermal-sensor-cells = <1>;
> > - };
> > + rng@...00000 {
> > + compatible = "qcom,prng";
> > + reg = <0x1a500000 0x200>;
> > + clocks = <&gcc PRNG_CLK>;
> > + clock-names = "core";
> > };
> >
> > - rpm: rpm@...000 {
> > - compatible = "qcom,rpm-ipq8064";
> > - reg = <0x108000 0x1000>;
> > - qcom,ipc = <&l2cc 0x8 2>;
> > + nand: nand-controller@...00000 {
> > + compatible = "qcom,ipq806x-nand";
> > + reg = <0x1ac00000 0x800>;
> >
> > - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "ack", "err", "wakeup";
> > + pinctrl-0 = <&nand_pins>;
> > + pinctrl-names = "default";
> >
> > - clocks = <&gcc RPM_MSG_RAM_H_CLK>;
> > - clock-names = "ram";
> > + clocks = <&gcc EBI2_CLK>,
> > + <&gcc EBI2_AON_CLK>;
> > + clock-names = "core", "aon";
> > +
> > + dmas = <&adm_dma 3>;
> > + dma-names = "rxtx";
> > + qcom,cmd-crci = <15>;
> > + qcom,data-crci = <3>;
> >
> > - rpmcc: clock-controller {
> > - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
> > - #clock-cells = <1>;
> > - };
> > - };
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> >
> > - tcsr: syscon@...00000 {
> > - compatible = "qcom,tcsr-ipq8064", "syscon";
> > - reg = <0x1a400000 0x100>;
> > + status = "disabled";
> > };
> >
> > - l2cc: clock-controller@...1000 {
> > - compatible = "qcom,kpss-gcc", "syscon";
> > - reg = <0x2011000 0x1000>;
> > - clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
> > - clock-names = "pll8_vote", "pxo";
> > - clock-output-names = "acpu_l2_aux";
> > - };
> > + sata_phy: sata-phy@...00000 {
> > + compatible = "qcom,ipq806x-sata-phy";
> > + reg = <0x1b400000 0x200>;
> >
> > - lcc: clock-controller@...00000 {
> > - compatible = "qcom,lcc-ipq8064";
> > - reg = <0x28000000 0x1000>;
> > - #clock-cells = <1>;
> > - #reset-cells = <1>;
> > + clocks = <&gcc SATA_PHY_CFG_CLK>;
> > + clock-names = "cfg";
> > +
> > + #phy-cells = <0>;
> > + status = "disabled";
> > };
> >
> > pcie0: pci@...00000 {
> > @@ -1082,20 +1223,53 @@ pcie2: pci@...00000 {
> > perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
> > };
> >
> > - nss_common: syscon@...00000 {
> > - compatible = "syscon";
> > - reg = <0x03000000 0x0000FFFF>;
> > - };
> > -
> > qsgmii_csr: syscon@...00000 {
> > compatible = "syscon";
> > reg = <0x1bb00000 0x000001FF>;
> > };
> >
> > - stmmac_axi_setup: stmmac-axi-config {
> > - snps,wr_osr_lmt = <7>;
> > - snps,rd_osr_lmt = <7>;
> > - snps,blen = <16 0 0 0 0 0 0>;
> > + lcc: clock-controller@...00000 {
> > + compatible = "qcom,lcc-ipq8064";
> > + reg = <0x28000000 0x1000>;
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > + };
> > +
> > + lpass@...00000 {
> > + compatible = "qcom,lpass-cpu";
> > + status = "disabled";
> > + clocks = <&lcc AHBIX_CLK>,
> > + <&lcc MI2S_OSR_CLK>,
> > + <&lcc MI2S_BIT_CLK>;
> > + clock-names = "ahbix-clk",
> > + "mi2s-osr-clk",
> > + "mi2s-bit-clk";
> > + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
> > + interrupt-names = "lpass-irq-lpaif";
> > + reg = <0x28100000 0x10000>;
> > + reg-names = "lpass-lpaif";
> > + };
> > +
> > + sata: sata@...00000 {
> > + compatible = "qcom,ipq806x-ahci", "generic-ahci";
> > + reg = <0x29000000 0x180>;
> > +
> > + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > + clocks = <&gcc SFAB_SATA_S_H_CLK>,
> > + <&gcc SATA_H_CLK>,
> > + <&gcc SATA_A_CLK>,
> > + <&gcc SATA_RXOOB_CLK>,
> > + <&gcc SATA_PMALIVE_CLK>;
> > + clock-names = "slave_face", "iface", "core",
> > + "rxoob", "pmalive";
> > +
> > + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
> > + assigned-clock-rates = <100000000>, <100000000>;
> > +
> > + phys = <&sata_phy>;
> > + phy-names = "sata-phy";
> > + status = "disabled";
> > };
> >
> > gmac0: ethernet@...00000 {
> > @@ -1193,179 +1367,5 @@ gmac3: ethernet@...00000 {
> >
> > status = "disabled";
> > };
> > -
> > - hs_phy_0: phy@...f8800 {
> > - compatible = "qcom,ipq806x-usb-phy-hs";
> > - reg = <0x100f8800 0x30>;
> > - clocks = <&gcc USB30_0_UTMI_CLK>;
> > - clock-names = "ref";
> > - #phy-cells = <0>;
> > -
> > - status = "disabled";
> > - };
> > -
> > - ss_phy_0: phy@...f8830 {
> > - compatible = "qcom,ipq806x-usb-phy-ss";
> > - reg = <0x100f8830 0x30>;
> > - clocks = <&gcc USB30_0_MASTER_CLK>;
> > - clock-names = "ref";
> > - #phy-cells = <0>;
> > -
> > - status = "disabled";
> > - };
> > -
> > - usb3_0: usb3@...f8800 {
> > - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - reg = <0x100f8800 0x8000>;
> > - clocks = <&gcc USB30_0_MASTER_CLK>;
> > - clock-names = "core";
> > -
> > - ranges;
> > -
> > - resets = <&gcc USB30_0_MASTER_RESET>;
> > - reset-names = "master";
> > -
> > - status = "disabled";
> > -
> > - dwc3_0: dwc3@...00000 {
> > - compatible = "snps,dwc3";
> > - reg = <0x10000000 0xcd00>;
> > - interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> > - phys = <&hs_phy_0>, <&ss_phy_0>;
> > - phy-names = "usb2-phy", "usb3-phy";
> > - dr_mode = "host";
> > - snps,dis_u3_susphy_quirk;
> > - };
> > - };
> > -
> > - hs_phy_1: phy@...f8800 {
> > - compatible = "qcom,ipq806x-usb-phy-hs";
> > - reg = <0x110f8800 0x30>;
> > - clocks = <&gcc USB30_1_UTMI_CLK>;
> > - clock-names = "ref";
> > - #phy-cells = <0>;
> > -
> > - status = "disabled";
> > - };
> > -
> > - ss_phy_1: phy@...f8830 {
> > - compatible = "qcom,ipq806x-usb-phy-ss";
> > - reg = <0x110f8830 0x30>;
> > - clocks = <&gcc USB30_1_MASTER_CLK>;
> > - clock-names = "ref";
> > - #phy-cells = <0>;
> > -
> > - status = "disabled";
> > - };
> > -
> > - usb3_1: usb3@...f8800 {
> > - compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - reg = <0x110f8800 0x8000>;
> > - clocks = <&gcc USB30_1_MASTER_CLK>;
> > - clock-names = "core";
> > -
> > - ranges;
> > -
> > - resets = <&gcc USB30_1_MASTER_RESET>;
> > - reset-names = "master";
> > -
> > - status = "disabled";
> > -
> > - dwc3_1: dwc3@...00000 {
> > - compatible = "snps,dwc3";
> > - reg = <0x11000000 0xcd00>;
> > - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > - phys = <&hs_phy_1>, <&ss_phy_1>;
> > - phy-names = "usb2-phy", "usb3-phy";
> > - dr_mode = "host";
> > - snps,dis_u3_susphy_quirk;
> > - };
> > - };
> > -
> > - vsdcc_fixed: vsdcc-regulator {
> > - compatible = "regulator-fixed";
> > - regulator-name = "SDCC Power";
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > - regulator-always-on;
> > - };
> > -
> > - sdcc1bam: dma-controller@...02000 {
> > - compatible = "qcom,bam-v1.3.0";
> > - reg = <0x12402000 0x8000>;
> > - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&gcc SDC1_H_CLK>;
> > - clock-names = "bam_clk";
> > - #dma-cells = <1>;
> > - qcom,ee = <0>;
> > - };
> > -
> > - sdcc3bam: dma-controller@...82000 {
> > - compatible = "qcom,bam-v1.3.0";
> > - reg = <0x12182000 0x8000>;
> > - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&gcc SDC3_H_CLK>;
> > - clock-names = "bam_clk";
> > - #dma-cells = <1>;
> > - qcom,ee = <0>;
> > - };
> > -
> > - amba: amba {
> > - compatible = "simple-bus";
> > - #address-cells = <1>;
> > - #size-cells = <1>;
> > - ranges;
> > -
> > - sdcc1: mmc@...00000 {
> > - status = "disabled";
> > - compatible = "arm,pl18x", "arm,primecell";
> > - arm,primecell-periphid = <0x00051180>;
> > - reg = <0x12400000 0x2000>;
> > - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "cmd_irq";
> > - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
> > - clock-names = "mclk", "apb_pclk";
> > - bus-width = <8>;
> > - max-frequency = <96000000>;
> > - non-removable;
> > - cap-sd-highspeed;
> > - cap-mmc-highspeed;
> > - mmc-ddr-1_8v;
> > - vmmc-supply = <&vsdcc_fixed>;
> > - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
> > - dma-names = "tx", "rx";
> > - };
> > -
> > - sdcc3: mmc@...80000 {
> > - compatible = "arm,pl18x", "arm,primecell";
> > - arm,primecell-periphid = <0x00051180>;
> > - status = "disabled";
> > - reg = <0x12180000 0x2000>;
> > - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "cmd_irq";
> > - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
> > - clock-names = "mclk", "apb_pclk";
> > - bus-width = <8>;
> > - cap-sd-highspeed;
> > - cap-mmc-highspeed;
> > - max-frequency = <192000000>;
> > - sd-uhs-sdr104;
> > - sd-uhs-ddr50;
> > - vqmmc-supply = <&vsdcc_fixed>;
> > - dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
> > - dma-names = "tx", "rx";
> > - };
> > - };
> > -
> > - sfpb_mutex: hwlock@...0600 {
> > - compatible = "qcom,sfpb-mutex";
> > - reg = <0x01200600 0x100>;
> > -
> > - #hwlock-cells = <1>;
> > - };
> > };
> > };
> > --
> > 2.36.1
> >
>
> --
> Ansuel
Powered by blists - more mailing lists