lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Wed, 14 Sep 2022 03:41:09 +0000
From:   <Arun.Ramadoss@...rochip.com>
To:     <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        <romain.naour@...le.fr>
CC:     <olteanv@...il.com>, <UNGLinuxDriver@...rochip.com>,
        <vivien.didelot@...il.com>, <andrew@...n.ch>,
        <linux@...linux.org.uk>, <Tristram.Ha@...rochip.com>,
        <f.fainelli@...il.com>,
        <Prasanna.VengateshanVaradharajan@...rochip.com>,
        <kuba@...nel.org>, <edumazet@...gle.com>, <pabeni@...hat.com>,
        <Woojung.Huh@...rochip.com>, <davem@...emloft.net>,
        <hkallweit1@...il.com>
Subject: Re: [Patch net-next 1/5] net: dsa: microchip: determine number of
 port irq based on switch type

Hi Romain,
On Tue, 2022-09-13 at 22:11 +0200, Romain Naour wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> Hi,
> 
> Le 13/09/2022 à 18:04, Arun Ramadoss a écrit :
> > Currently the number of port irqs is hard coded for the lan937x
> > switch
> > as 6. In order to make the generic interrupt handler for ksz
> > switches,
> > number of port irq supported by the switch is added to the
> > ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for
> > ksz9567.
> 
> The ksz9896 has been added recently and it's close to the ksz9897.
> So it should get ".port_nirqs = 2" too?
> 
> IIUC, to get the number of port irqs you have to look at table "Port
> Interrupt
> Mask Register" in the datasheet.
> 
> 4 port irqs for the ksz9477: SGMII, PTP, PHY and ACL.
> 2 port irqs for the ksz9897/ksz9896: PHY and ACL.
> 3 port irqs for the ksz9567: PTP, PHY and ACL.

Thanks for pointing it out.
I will include .port_nirqs=2 for ksz9896 and send the v2 patch.

> 
> Best regards,
> Romain
> 
> > 
> > Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
> > Reviewed-by: Andrew Lunn <andrew@...n.ch>
> > ---
> >  drivers/net/dsa/microchip/ksz_common.c   | 9 +++++++++
> >  drivers/net/dsa/microchip/ksz_common.h   | 1 +
> >  drivers/net/dsa/microchip/lan937x_main.c | 4 +---
> >  3 files changed, 11 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/net/dsa/microchip/ksz_common.c
> > b/drivers/net/dsa/microchip/ksz_common.c
> > index fcaa71f66322..b91089a483e7 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.c
> > +++ b/drivers/net/dsa/microchip/ksz_common.c
> > @@ -1168,6 +1168,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 16,
> >               .cpu_ports = 0x7F,      /* can be configured as cpu
> > port */
> >               .port_cnt = 7,          /* total physical port count
> > */
> > +             .port_nirqs = 4,
> >               .ops = &ksz9477_dev_ops,
> >               .phy_errata_9477 = true,
> >               .mib_names = ksz9477_mib_names,
> > @@ -1230,6 +1231,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 16,
> >               .cpu_ports = 0x7F,      /* can be configured as cpu
> > port */
> >               .port_cnt = 7,          /* total physical port count
> > */
> > +             .port_nirqs = 2,
> >               .ops = &ksz9477_dev_ops,
> >               .phy_errata_9477 = true,
> >               .mib_names = ksz9477_mib_names,
> > @@ -1259,6 +1261,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 16,
> >               .cpu_ports = 0x07,      /* can be configured as cpu
> > port */
> >               .port_cnt = 3,          /* total port count */
> > +             .port_nirqs = 2,
> >               .ops = &ksz9477_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1283,6 +1286,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 16,
> >               .cpu_ports = 0x7F,      /* can be configured as cpu
> > port */
> >               .port_cnt = 7,          /* total physical port count
> > */
> > +             .port_nirqs = 3,
> >               .ops = &ksz9477_dev_ops,
> >               .phy_errata_9477 = true,
> >               .mib_names = ksz9477_mib_names,
> > @@ -1312,6 +1316,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 256,
> >               .cpu_ports = 0x10,      /* can be configured as cpu
> > port */
> >               .port_cnt = 5,          /* total physical port count
> > */
> > +             .port_nirqs = 6,
> >               .ops = &lan937x_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1335,6 +1340,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 256,
> >               .cpu_ports = 0x30,      /* can be configured as cpu
> > port */
> >               .port_cnt = 6,          /* total physical port count
> > */
> > +             .port_nirqs = 6,
> >               .ops = &lan937x_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1358,6 +1364,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 256,
> >               .cpu_ports = 0x30,      /* can be configured as cpu
> > port */
> >               .port_cnt = 8,          /* total physical port count
> > */
> > +             .port_nirqs = 6,
> >               .ops = &lan937x_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1385,6 +1392,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 256,
> >               .cpu_ports = 0x38,      /* can be configured as cpu
> > port */
> >               .port_cnt = 5,          /* total physical port count
> > */
> > +             .port_nirqs = 6,
> >               .ops = &lan937x_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > @@ -1412,6 +1420,7 @@ const struct ksz_chip_data ksz_switch_chips[]
> > = {
> >               .num_statics = 256,
> >               .cpu_ports = 0x30,      /* can be configured as cpu
> > port */
> >               .port_cnt = 8,          /* total physical port count
> > */
> > +             .port_nirqs = 6,
> >               .ops = &lan937x_dev_ops,
> >               .mib_names = ksz9477_mib_names,
> >               .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
> > diff --git a/drivers/net/dsa/microchip/ksz_common.h
> > b/drivers/net/dsa/microchip/ksz_common.h
> > index 6203dcd8c8f7..baa1e1bc1b7c 100644
> > --- a/drivers/net/dsa/microchip/ksz_common.h
> > +++ b/drivers/net/dsa/microchip/ksz_common.h
> > @@ -45,6 +45,7 @@ struct ksz_chip_data {
> >       int num_statics;
> >       int cpu_ports;
> >       int port_cnt;
> > +     u8 port_nirqs;
> >       const struct ksz_dev_ops *ops;
> >       bool phy_errata_9477;
> >       bool ksz87xx_eee_link_erratum;
> > diff --git a/drivers/net/dsa/microchip/lan937x_main.c
> > b/drivers/net/dsa/microchip/lan937x_main.c
> > index 9b6760b1e572..7136d9c55315 100644
> > --- a/drivers/net/dsa/microchip/lan937x_main.c
> > +++ b/drivers/net/dsa/microchip/lan937x_main.c
> > @@ -20,8 +20,6 @@
> >  #include "ksz_common.h"
> >  #include "lan937x.h"
> > 
> > -#define LAN937x_PNIRQS 6
> > -
> >  static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits,
> > bool set)
> >  {
> >       return regmap_update_bits(dev->regmap[0], addr, bits, set ?
> > bits : 0);
> > @@ -697,7 +695,7 @@ static int lan937x_pirq_setup(struct ksz_device
> > *dev, u8 p)
> >       int ret, irq;
> >       int irq_num;
> > 
> > -     port->pirq.nirqs = LAN937x_PNIRQS;
> > +     port->pirq.nirqs = dev->info->port_nirqs;
> >       port->pirq.domain = irq_domain_add_simple(dev->dev->of_node,
> >                                                 port->pirq.nirqs,
> > 0,
> >                                                 &lan937x_pirq_domai
> > n_ops,
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ