linux-kernel - RE: [RESEND PATCH v9 1/3] dt-bindings: mfd: Convert atmel-flexcom to json-schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CO1PR11MB486530021339393DDAA558F192469@CO1PR11MB4865.namprd11.prod.outlook.com>
Date:   Wed, 14 Sep 2022 04:56:33 +0000
From:   <Kavyasree.Kotagiri@...rochip.com>
To:     <krzysztof.kozlowski@...aro.org>, <robh@...nel.org>,
        <lee@...nel.org>
CC:     <Claudiu.Beznea@...rochip.com>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>,
        <krzysztof.kozlowski+dt@...aro.org>, <Nicolas.Ferre@...rochip.com>,
        <robh+dt@...nel.org>, <Sergiu.Moga@...rochip.com>
Subject: RE: [RESEND PATCH v9 1/3] dt-bindings: mfd: Convert atmel-flexcom to
 json-schema

> > On 13/09/2022 07:29, Kavyasree.Kotagiri@...rochip.com wrote:
> > >>>>> flexcom@...18000: spi@400: Unevaluated properties are not
> allowed
> > >>>> ('dma-
> > >>>>> names', 'dmas' were unexpected)
> > >>>>>         arch/arm/boot/dts/at91-kizbox3-hs.dtb
> > >>>>>         arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb
> > >>>>>         arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb
> > >>>>>         arch/arm/boot/dts/at91-sama5d2_icp.dtb
> > >>>>>         arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb
> > >>>>>         arch/arm/boot/dts/at91-sama5d2_xplained.dtb
> > >>>>
> > >>>> dma properties for spi node is already being covered by Sergiu in
> below
> > >>>> patch:
> > >>>> https://lore.kernel.org/lkml/b4625526-8f9b-ada8-f854-
> > >>>> 751a48545576@...aro.org/
> > >>>>
> > >>> Hi Rob, Please let me know your comments.
> > >>
> > >> this means it cannot be currently tested. Are you sure that there are no
> > >> warnings in all DTBs with your patches?
> > >>
> > > Yes, I ran dtbs_check. I don’t see any warnings.
> >
> > Then the warning could be probably ignored (I assume it is really fixed
> > when both patchsets land).
> >
> Yes. You are right.
> 
Hi All,

Please let me know your comments on this patch series.

Thanks,
Kavya
> >
> > Best regards,
> > Krzysztof