[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220914085451.11723-4-arinc.unal@arinc9.com>
Date: Wed, 14 Sep 2022 11:54:44 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sergio Paracuellos <sergio.paracuellos@...il.com>,
erkin.bozoglu@...ont.com
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH 03/10] dt-bindings: net: dsa: mediatek,mt7530: expand gpio-controller description
Expand the description of the gpio-controller property to include the
controllable pins of the MT7530 switch.
The gpio-controller property is only used for the MT7530 switch. Therefore,
invalidate it for the MT7531 switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
.../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 2c73d13adf14..3ec4fffec780 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -104,7 +104,14 @@ properties:
gpio-controller:
type: boolean
description:
- If defined, MT7530's LED controller will run on GPIO mode.
+ If defined, LED controller of the MT7530 switch will run on GPIO mode.
+
+ There are 15 controllable pins.
+ port 0 LED 0..2 as GPIO 0..2
+ port 1 LED 0..2 as GPIO 3..5
+ port 2 LED 0..2 as GPIO 6..8
+ port 3 LED 0..2 as GPIO 9..11
+ port 4 LED 0..2 as GPIO 12..14
"#interrupt-cells":
const: 1
@@ -272,6 +279,7 @@ allOf:
then:
$ref: "#/$defs/mt7531-dsa-port"
properties:
+ gpio-controller: false
mediatek,mcm: false
- if:
--
2.34.1
Powered by blists - more mailing lists