| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220914110448.GF4024@jannau.net>
Date: Wed, 14 Sep 2022 13:04:49 +0200
From: Janne Grunau <j@...nau.net>
To: Rob Herring <robh@...nel.org>
Cc: asahi@...ts.linux.dev, Mark Kettenis <kettenis@...nbsd.org>,
Hector Martin <marcan@...can.st>,
Alyssa Rosenzweig <alyssa@...enzweig.io>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sven Peter <sven@...npeter.dev>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH 06/10] arm64: dts: apple: Add initial
t6000/t6001/t6002 DTs
On 2022-09-13 08:32:07 -0500, Rob Herring wrote:
> On Fri, Sep 09, 2022 at 03:50:59PM +0200, Janne Grunau wrote:
> > From: Hector Martin <marcan@...can.st>
> >
> > These SoCs are found in Apple devices with M1 Pro (t6000), M1 Max
> > (t6001) and M1 Ultra (t6002).
> >
> > t6000 is a cut-down version of t6001, so the former just includes the
> > latter and disables the missing bits (This is currently just one PMGR
> > node and all of its domains.
> >
> > t6002 is two connected t6001 dies. The implementation seems to use
> > t6001 with blocks disabled (mostly on the second die). MMIO addresses on
> > the second die have a constant offset. The interrupt controller is
> > multi-die aware. This setup can be represented in the device tree with
> > two top level "soc" nodes. The MMIO offset is applied via "ranges" and
> > devices are included with preproceesor macros to make the node labels
> > unique and to specify the die number for the interrupt definition.
> >
> > Device nodes are distributed over dtsi files based on whether they are
> > present on both dies or just on the first die. The only execption is the
> > NVMe controller which resides on the second die. Its nodes are in a
> > separate file.
> >
> > Signed-off-by: Hector Martin <marcan@...can.st>
> > Co-developed-by: Janne Grunau <j@...nau.net>
> > Signed-off-by: Janne Grunau <j@...nau.net>
> >
> > ---
> >
> >
> > ---
> > arch/arm64/boot/dts/apple/multi-die-cpp.h | 23 +
> > arch/arm64/boot/dts/apple/t6000.dtsi | 18 +
> > arch/arm64/boot/dts/apple/t6001.dtsi | 63 +
> > arch/arm64/boot/dts/apple/t6002.dtsi | 173 ++
> > arch/arm64/boot/dts/apple/t600x-common.dtsi | 128 ++
> > arch/arm64/boot/dts/apple/t600x-die0.dtsi | 298 +++
> > arch/arm64/boot/dts/apple/t600x-dieX.dtsi | 103 +
> > .../arm64/boot/dts/apple/t600x-gpio-pins.dtsi | 45 +
> > arch/arm64/boot/dts/apple/t600x-nvme.dtsi | 42 +
> > arch/arm64/boot/dts/apple/t600x-pmgr.dtsi | 2012 +++++++++++++++++
> > 10 files changed, 2905 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/apple/multi-die-cpp.h
> > create mode 100644 arch/arm64/boot/dts/apple/t6000.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t6001.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t6002.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-common.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-die0.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-dieX.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-nvme.dtsi
> > create mode 100644 arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/apple/multi-die-cpp.h b/arch/arm64/boot/dts/apple/multi-die-cpp.h
> > new file mode 100644
> > index 000000000000..153d89dd0ae1
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/multi-die-cpp.h
> > @@ -0,0 +1,23 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT
> > + *
> > + * C preprocessor macros for t600x multi die support.
> > + */
> > +
> > +#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
> > +#define __DTS_APPLE_MULTI_DIE_CPP_H
> > +
> > +#ifndef __stringify
> > +/* copied from include/linux/stringify.h */
>
> Which is dual licensed? Arguably, not big enough to matter.
include/linux/stringify.h has no license header at all. If that's
acceptable I will drop it from this file as well.
I started from scratch with the SPDX header from other apple dts files.
I should have paid more attention after replacing it with kernel
__stringify (I probably would have updated it if stringify.h had a SPDX
header).
> > +#define __stringify_1(x...) #x
> > +#define __stringify(x...) __stringify_1(x)
> > +#endif
> > +
> > +#ifndef __concat
> > +#define __concat_1(x, y...) x ## y
> > +#define __concat(x, y...) __concat_1(x, y)
> > +#endif
> > +
> > +#define DIE_NODE(a) __concat(a, DIE)
> > +#define DIE_LABEL(a) __stringify(__concat(a, DIE))
>
> Not a pattern we encourage in DT, but seems necessary here.
That is probably an arguments for keeping __concat/__stringify local
instead of adding it to include/dt-bindings
> > +
> > +#endif /* !__LINUX_STRINGIFY_H */
> > diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
> > new file mode 100644
> > index 000000000000..89c3b211b116
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t6000.dtsi
> > @@ -0,0 +1,18 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple T6000 "M1 Pro" SoC
> > + *
> > + * Other names: H13J, "Jade Chop"
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
> > +
> > +/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
> > +
> > +#include "t6001.dtsi"
> > +
> > +/ {
> > + compatible = "apple,t6000", "apple,arm-platform";
> > +};
> > +
> > +/delete-node/ &pmgr_south;
> > diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
> > new file mode 100644
> > index 000000000000..620b17e4031f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t6001.dtsi
> > @@ -0,0 +1,63 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple T6001 "M1 Max" SoC
> > + *
> > + * Other names: H13J, "Jade"
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/apple-aic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/pinctrl/apple.h>
> > +
> > +#include "multi-die-cpp.h"
> > +
> > +#include "t600x-common.dtsi"
> > +
> > +/ {
> > + compatible = "apple,t6001", "apple,arm-platform";
> > +
> > + soc {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + ranges;
> > + nonposted-mmio;
> > +
> > + // filled via templated includes at the end of the file
> > + };
> > +};
> > +
> > +#define DIE
> > +#define DIE_NO 0
> > +
> > +&{/soc} {
> > + #include "t600x-die0.dtsi"
> > + #include "t600x-dieX.dtsi"
> > + #include "t600x-nvme.dtsi"
> > +};
> > +
> > +#include "t600x-gpio-pins.dtsi"
> > +#include "t600x-pmgr.dtsi"
> > +
> > +#undef DIE
> > +#undef DIE_NO
> > +
> > +
> > +&aic {
> > + affinities {
> > + e-core-pmu-affinity {
> > + apple,fiq-index = <AIC_CPU_PMU_E>;
> > + cpus = <&cpu_e00 &cpu_e01>;
> > + };
> > +
> > + p-core-pmu-affinity {
> > + apple,fiq-index = <AIC_CPU_PMU_P>;
> > + cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
> > + &cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
> > + };
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
> > new file mode 100644
> > index 000000000000..32c971c0e191
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/apple/t6002.dtsi
> > @@ -0,0 +1,173 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Apple T6002 "M1 Ultra" SoC
> > + *
> > + * Other names: H13J, "Jade 2C"
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/apple-aic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/pinctrl/apple.h>
> > +
> > +#include "multi-die-cpp.h"
> > +
> > +#include "t600x-common.dtsi"
> > +
> > +/ {
> > + compatible = "apple,t6002", "apple,arm-platform";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + cpu_e10: cpu@800 {
> > + compatible = "apple,icestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x800>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_e11: cpu@801 {
> > + compatible = "apple,icestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x801>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p20: cpu@...00 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10900>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p21: cpu@...01 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10901>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p22: cpu@...02 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10902>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p23: cpu@...03 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10903>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p30: cpu@...00 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10a00>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p31: cpu@...01 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10a01>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p32: cpu@...02 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10a02>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > +
> > + cpu_p33: cpu@...03 {
> > + compatible = "apple,firestorm";
> > + device_type = "cpu";
> > + reg = <0x0 0x10a03>;
> > + enable-method = "spin-table";
> > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > + };
> > + };
> > +
> > + die0: soc@0 {
>
> Where does 0 come from?
>
> Unit address comes from 'reg' or 'ranges'. Empty ranges here means all
> of the address space is part of this node which obviously is not true
> given the next node. You need a 1:1 non-empty ranges entry.
fixed locally
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > + nonposted-mmio;
> > +
> > + // filled via templated includes at the end of the file
> > + };
> > +
> > + die1: soc@1 {
>
> soc@...0000000
fixed
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
> > + <0x7 0x0 0x27 0x0 0xf 0x80000000>;
> > + nonposted-mmio;
> > +
> > + // filled via templated includes at the end of the file
> > + };
> > +};
> > +
> > +#define DIE
> > +#define DIE_NO 0
> > +
> > +&die0 {
> > + #include "t600x-die0.dtsi"
>
> Looks like this one is not templated, so it doesn't really need to be
> here. But it's fine.
I added here to have all '#include' directives in a single place.
t600x-gpio-pins.dtsi isn't templated either.
> > + #include "t600x-dieX.dtsi"
> > +};
> > +
> > +#include "t600x-pmgr.dtsi"
> > +#include "t600x-gpio-pins.dtsi"
> > +
> > +#undef DIE
> > +#undef DIE_NO
> > +
> > +#define DIE _die1
> > +#define DIE_NO 1
> > +
> > +&die1 {
> > + #include "t600x-dieX.dtsi"
> > + #include "t600x-nvme.dtsi"
> > +};
> > +
> > +#include "t600x-pmgr.dtsi"
> > +
> > +#undef DIE
> > +#undef DIE_NO
thanks
Powered by blists - more mailing lists