[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220914141428.2201784-2-dmitry.torokhov@gmail.com>
Date: Wed, 14 Sep 2022 07:14:25 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Heiko Stuebner <heiko@...ech.de>
Cc: Linus Walleij <linus.walleij@...aro.org>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/5] Input: auo-pixcir-ts - switch to using gpiod API
This switches the driver to gpiod API and drops uses of of_get_gpio() API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
drivers/input/touchscreen/auo-pixcir-ts.c | 47 ++++++++++-------------
1 file changed, 20 insertions(+), 27 deletions(-)
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
index a51d66ebff2b..c3bce9fb2c94 100644
--- a/drivers/input/touchscreen/auo-pixcir-ts.c
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -10,6 +10,7 @@
* Copyright (c) 2008 QUALCOMM USA, INC.
*/
+#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -19,9 +20,8 @@
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
/*
* Coordinate calculation:
@@ -112,8 +112,8 @@
struct auo_pixcir_ts {
struct i2c_client *client;
struct input_dev *input;
- int gpio_int;
- int gpio_rst;
+ struct gpio_desc *gpio_int;
+ struct gpio_desc *gpio_rst;
char phys[32];
unsigned int x_max;
@@ -193,7 +193,7 @@ static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id)
/* check for up event in touch touch_ind_mode */
if (ts->touch_ind_mode) {
- if (gpio_get_value(ts->gpio_int) == 0) {
+ if (gpiod_get_value_cansleep(ts->gpio_int) == 0) {
input_mt_sync(ts->input);
input_report_key(ts->input, BTN_TOUCH, 0);
input_sync(ts->input);
@@ -482,18 +482,6 @@ static int auo_pixcir_parse_dt(struct device *dev, struct auo_pixcir_ts *ts)
if (!np)
return -ENOENT;
- ts->gpio_int = of_get_gpio(np, 0);
- if (!gpio_is_valid(ts->gpio_int)) {
- dev_err(dev, "failed to get interrupt gpio\n");
- return -EINVAL;
- }
-
- ts->gpio_rst = of_get_gpio(np, 1);
- if (!gpio_is_valid(ts->gpio_rst)) {
- dev_err(dev, "failed to get reset gpio\n");
- return -EINVAL;
- }
-
if (of_property_read_u32(np, "x-size", &ts->x_max)) {
dev_err(dev, "failed to get x-size property\n");
return -EINVAL;
@@ -517,7 +505,7 @@ static void auo_pixcir_reset(void *data)
{
struct auo_pixcir_ts *ts = data;
- gpio_set_value(ts->gpio_rst, 0);
+ gpiod_set_value_cansleep(ts->gpio_rst, 1);
}
static int auo_pixcir_probe(struct i2c_client *client,
@@ -578,23 +566,28 @@ static int auo_pixcir_probe(struct i2c_client *client,
input_set_drvdata(ts->input, ts);
- error = devm_gpio_request_one(&client->dev, ts->gpio_int,
- GPIOF_DIR_IN, "auo_pixcir_ts_int");
+ ts->gpio_int = devm_gpiod_get_index(&client->dev, NULL, 0, GPIOD_IN);
+ error = PTR_ERR_OR_ZERO(ts->gpio_int);
if (error) {
- dev_err(&client->dev, "request of gpio %d failed, %d\n",
- ts->gpio_int, error);
+ dev_err(&client->dev,
+ "request of int gpio failed: %d\n", error);
return error;
}
- error = devm_gpio_request_one(&client->dev, ts->gpio_rst,
- GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
- "auo_pixcir_ts_rst");
+ gpiod_set_consumer_name(ts->gpio_int, "auo_pixcir_ts_int");
+
+ /* Take the chip out of reset */
+ ts->gpio_rst = devm_gpiod_get_index(&client->dev, NULL, 1,
+ GPIOD_OUT_LOW);
+ error = PTR_ERR_OR_ZERO(ts->gpio_rst);
if (error) {
- dev_err(&client->dev, "request of gpio %d failed, %d\n",
- ts->gpio_rst, error);
+ dev_err(&client->dev,
+ "request of reset gpio failed: %d\n", error);
return error;
}
+ gpiod_set_consumer_name(ts->gpio_rst, "auo_pixcir_ts_rst");
+
error = devm_add_action_or_reset(&client->dev, auo_pixcir_reset, ts);
if (error) {
dev_err(&client->dev, "failed to register reset action, %d\n",
--
2.37.2.789.g6183377224-goog
Powered by blists - more mailing lists