| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87k064pa2v.fsf@gmail.com>
Date: Thu, 15 Sep 2022 23:50:23 +0300
From: Mikhail Rudenko <mike.rudenko@...il.com>
To: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Jacopo Mondi <jacopo@...ndi.org>,
Shawn Tu <shawnx.tu@...el.com>,
Randy Dunlap <rdunlap@...radead.org>,
Daniel Scally <djrscally@...il.com>,
Christian Hemp <c.hemp@...tec.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Marek Vasut <marex@...x.de>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] media: i2c: add support for ov4689
Hi Tommaso,
On 2022-09-14 at 17:51 +02, Tommaso Merciai <tommaso.merciai@...rulasolutions.com> wrote:
> Hi Mikhail,
> I do a first round on reviewing your driver :)
>
> On Sun, Sep 11, 2022 at 11:01:35PM +0300, Mikhail Rudenko wrote:
>> Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
>> is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
>> bus for data.
>>
>> This driver supports following features:
>> - manual exposure and analog gain control support
>> - test pattern support
>> - media controller support
>> - runtime PM support
>> - support following resolutions:
>> + 2688x1520 at 30 fps
>>
>> The driver provides all mandatory V4L2 controls for compatibility with
>> libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
>> implements 4 lane mode only at this moment.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@...il.com>
>> ---
>> MAINTAINERS | 1 +
>> drivers/media/i2c/Kconfig | 14 +
>> drivers/media/i2c/Makefile | 1 +
>> drivers/media/i2c/ov4689.c | 951 +++++++++++++++++++++++++++++++++++++
>> 4 files changed, 967 insertions(+)
>> create mode 100644 drivers/media/i2c/ov4689.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 63c4844f26e6..1857f3864e1b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14529,6 +14529,7 @@ L: linux-media@...r.kernel.org
>> S: Maintained
>> T: git git://linuxtv.org/media_tree.git
>> F: Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>> +F: drivers/media/i2c/ov5647.c
>>
>> OMNIVISION OV5640 SENSOR DRIVER
>> M: Steve Longerbeam <slongerbeam@...il.com>
>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>> index fae2baabb773..4993e1ae2ea8 100644
>> --- a/drivers/media/i2c/Kconfig
>> +++ b/drivers/media/i2c/Kconfig
>> @@ -429,6 +429,20 @@ config VIDEO_OV2740
>> To compile this driver as a module, choose M here: the
>> module will be called ov2740.
>>
>> +config VIDEO_OV4689
>> + tristate "OmniVision OV4689 sensor support"
>> + depends on OF
>> + depends on GPIOLIB && VIDEO_DEV && I2C
>> + select MEDIA_CONTROLLER
>> + select VIDEO_V4L2_SUBDEV_API
>> + select V4L2_FWNODE
>> + help
>> + This is a Video4Linux2 sensor-level driver for the OmniVision
>> + OV4689 camera.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called ov4689.
>> +
>> config VIDEO_OV5640
>> tristate "OmniVision OV5640 sensor support"
>> depends on OF
>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>> index 3e1696963e7f..7446c0a1eed0 100644
>> --- a/drivers/media/i2c/Makefile
>> +++ b/drivers/media/i2c/Makefile
>> @@ -78,6 +78,7 @@ obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
>> obj-$(CONFIG_VIDEO_OV2680) += ov2680.o
>> obj-$(CONFIG_VIDEO_OV2685) += ov2685.o
>> obj-$(CONFIG_VIDEO_OV2740) += ov2740.o
>> +obj-$(CONFIG_VIDEO_OV4689) += ov4689.o
>> obj-$(CONFIG_VIDEO_OV5640) += ov5640.o
>> obj-$(CONFIG_VIDEO_OV5645) += ov5645.o
>> obj-$(CONFIG_VIDEO_OV5647) += ov5647.o
>> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
>> new file mode 100644
>> index 000000000000..9f05e812acf8
>> --- /dev/null
>> +++ b/drivers/media/i2c/ov4689.c
>> @@ -0,0 +1,951 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * ov4689 driver
>> + *
>> + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-subdev.h>
>> +#include <media/v4l2-fwnode.h>
>> +
>> +#define CHIP_ID 0x004688
>> +#define OV4689_REG_CHIP_ID 0x300a
>> +
>> +#define OV4689_XVCLK_FREQ 24000000
>> +
>> +#define OV4689_REG_CTRL_MODE 0x0100
>> +#define OV4689_MODE_SW_STANDBY 0x0
>> +#define OV4689_MODE_STREAMING BIT(0)
>> +
>> +#define OV4689_REG_EXPOSURE 0x3500
>> +#define OV4689_EXPOSURE_MIN 4
>> +#define OV4689_EXPOSURE_STEP 1
>> +#define OV4689_VTS_MAX 0x7fff
>> +
>> +#define OV4689_REG_GAIN_H 0x3508
>> +#define OV4689_REG_GAIN_L 0x3509
>> +#define OV4689_GAIN_H_MASK 0x07
>> +#define OV4689_GAIN_H_SHIFT 8
>> +#define OV4689_GAIN_L_MASK 0xff
>> +#define OV4689_GAIN_MIN 0x10
>> +#define OV4689_GAIN_MAX 0xf8
>> +#define OV4689_GAIN_STEP 1
>> +#define OV4689_GAIN_DEFAULT 0x10
>> +
>> +#define OV4689_REG_TEST_PATTERN 0x5040
>> +#define OV4689_TEST_PATTERN_ENABLE 0x80
>> +#define OV4689_TEST_PATTERN_DISABLE 0x0
>> +
>> +#define OV4689_REG_VTS 0x380e
>> +
>> +#define REG_NULL 0xFFFF
>> +
>> +#define OV4689_REG_VALUE_08BIT 1
>> +#define OV4689_REG_VALUE_16BIT 2
>> +#define OV4689_REG_VALUE_24BIT 3
>> +
>> +#define OV4689_LANES 4
>> +#define OV4689_BITS_PER_SAMPLE 10
>> +
>> +static const char *const ov4689_supply_names[] = {
>> + "avdd", /* Analog power */
>> + "dovdd", /* Digital I/O power */
>> + "dvdd", /* Digital core power */
>> +};
>> +
>> +#define OV4689_NUM_SUPPLIES ARRAY_SIZE(ov4689_supply_names)
>> +
>> +struct regval {
>> + u16 addr;
>> + u8 val;
>> +};
>
> What about use ov4689_mode_id? I think could be usefull for the future:
>
> + enum ov4689_mode_id {
> + OV4689_MODE_2688_1520 = 0,
> + OV4689_NUM_MODES,
> + };
Looks like a good idea, will add in v3.
>> +
>> +struct ov4689_mode {
> + enum ov4689_mode_id id;
Same.
>> + u32 width;
>> + u32 height;
>> + u32 max_fps;
>> + u32 hts_def;
>> + u32 vts_def;
>> + u32 exp_def;
>> + const struct regval *reg_list;
>> +};
>> +
>> +struct ov4689 {
>> + struct i2c_client *client;
>> + struct clk *xvclk;
>> + struct gpio_desc *reset_gpio;
>> + struct gpio_desc *pwdn_gpio;
>> + struct regulator_bulk_data supplies[OV4689_NUM_SUPPLIES];
>> +
>> + struct v4l2_subdev subdev;
>> + struct media_pad pad;
>> +
>> + struct mutex mutex; /* lock to protect streaming, ctrls and cur_mode */
>> + bool streaming;
>> + struct v4l2_ctrl_handler ctrl_handler;
>> + struct v4l2_ctrl *exposure;
>> + struct v4l2_ctrl *anal_gain;
>> + struct v4l2_ctrl *digi_gain;
>> + struct v4l2_ctrl *hblank;
>> + struct v4l2_ctrl *vblank;
>> + struct v4l2_ctrl *test_pattern;
>> +
>> + const struct ov4689_mode *cur_mode;
>> +};
>> +
>> +#define to_ov4689(sd) container_of(sd, struct ov4689, subdev)
>> +
>> +/*
>> + * Xclk 24Mhz
>> + */
>> +static const struct regval ov4689_global_regs[] = {
>> + { REG_NULL, 0x00 },
>> +};
>> +
>> +/*
>> + * Xclk 24Mhz
>> + * max_framerate 30fps
>> + * mipi_datarate per lane 1008Mbps
>> + */
>> +static const struct regval ov4689_2688x1520_regs[] = {
>> + {0x0103, 0x01}, {0x3638, 0x00}, {0x0300, 0x00},
>> + {0x0302, 0x2a}, {0x0303, 0x00}, {0x0304, 0x03},
>> + {0x030b, 0x00}, {0x030d, 0x1e}, {0x030e, 0x04},
>> + {0x030f, 0x01}, {0x0312, 0x01}, {0x031e, 0x00},
>> + {0x3000, 0x20}, {0x3002, 0x00}, {0x3018, 0x72},
>> + {0x3020, 0x93}, {0x3021, 0x03}, {0x3022, 0x01},
>> + {0x3031, 0x0a}, {0x303f, 0x0c}, {0x3305, 0xf1},
>> + {0x3307, 0x04}, {0x3309, 0x29}, {0x3500, 0x00},
>> + {0x3501, 0x60}, {0x3502, 0x00}, {0x3503, 0x04},
>> + {0x3504, 0x00}, {0x3505, 0x00}, {0x3506, 0x00},
>> + {0x3507, 0x00}, {0x3508, 0x00}, {0x3509, 0x80},
>> + {0x350a, 0x00}, {0x350b, 0x00}, {0x350c, 0x00},
>> + {0x350d, 0x00}, {0x350e, 0x00}, {0x350f, 0x80},
>> + {0x3510, 0x00}, {0x3511, 0x00}, {0x3512, 0x00},
>> + {0x3513, 0x00}, {0x3514, 0x00}, {0x3515, 0x80},
>> + {0x3516, 0x00}, {0x3517, 0x00}, {0x3518, 0x00},
>> + {0x3519, 0x00}, {0x351a, 0x00}, {0x351b, 0x80},
>> + {0x351c, 0x00}, {0x351d, 0x00}, {0x351e, 0x00},
>> + {0x351f, 0x00}, {0x3520, 0x00}, {0x3521, 0x80},
>> + {0x3522, 0x08}, {0x3524, 0x08}, {0x3526, 0x08},
>> + {0x3528, 0x08}, {0x352a, 0x08}, {0x3602, 0x00},
>> + {0x3603, 0x40}, {0x3604, 0x02}, {0x3605, 0x00},
>> + {0x3606, 0x00}, {0x3607, 0x00}, {0x3609, 0x12},
>> + {0x360a, 0x40}, {0x360c, 0x08}, {0x360f, 0xe5},
>> + {0x3608, 0x8f}, {0x3611, 0x00}, {0x3613, 0xf7},
>> + {0x3616, 0x58}, {0x3619, 0x99}, {0x361b, 0x60},
>> + {0x361c, 0x7a}, {0x361e, 0x79}, {0x361f, 0x02},
>> + {0x3632, 0x00}, {0x3633, 0x10}, {0x3634, 0x10},
>> + {0x3635, 0x10}, {0x3636, 0x15}, {0x3646, 0x86},
>> + {0x364a, 0x0b}, {0x3700, 0x17}, {0x3701, 0x22},
>> + {0x3703, 0x10}, {0x370a, 0x37}, {0x3705, 0x00},
>> + {0x3706, 0x63}, {0x3709, 0x3c}, {0x370b, 0x01},
>> + {0x370c, 0x30}, {0x3710, 0x24}, {0x3711, 0x0c},
>> + {0x3716, 0x00}, {0x3720, 0x28}, {0x3729, 0x7b},
>> + {0x372a, 0x84}, {0x372b, 0xbd}, {0x372c, 0xbc},
>> + {0x372e, 0x52}, {0x373c, 0x0e}, {0x373e, 0x33},
>> + {0x3743, 0x10}, {0x3744, 0x88}, {0x3745, 0xc0},
>> + {0x374a, 0x43}, {0x374c, 0x00}, {0x374e, 0x23},
>> + {0x3751, 0x7b}, {0x3752, 0x84}, {0x3753, 0xbd},
>> + {0x3754, 0xbc}, {0x3756, 0x52}, {0x375c, 0x00},
>> + {0x3760, 0x00}, {0x3761, 0x00}, {0x3762, 0x00},
>> + {0x3763, 0x00}, {0x3764, 0x00}, {0x3767, 0x04},
>> + {0x3768, 0x04}, {0x3769, 0x08}, {0x376a, 0x08},
>> + {0x376b, 0x20}, {0x376c, 0x00}, {0x376d, 0x00},
>> + {0x376e, 0x00}, {0x3773, 0x00}, {0x3774, 0x51},
>> + {0x3776, 0xbd}, {0x3777, 0xbd}, {0x3781, 0x18},
>> + {0x3783, 0x25}, {0x3798, 0x1b}, {0x3800, 0x00},
>> + {0x3801, 0x08}, {0x3802, 0x00}, {0x3803, 0x04},
>> + {0x3804, 0x0a}, {0x3805, 0x97}, {0x3806, 0x05},
>> + {0x3807, 0xfb}, {0x3808, 0x0a}, {0x3809, 0x80},
>> + {0x380a, 0x05}, {0x380b, 0xf0}, {0x380c, 0x0a},
>> + {0x380d, 0x80}, {0x380e, 0x06}, {0x380f, 0x12},
>> + {0x3810, 0x00}, {0x3811, 0x08}, {0x3812, 0x00},
>> + {0x3813, 0x04}, {0x3814, 0x01}, {0x3815, 0x01},
>> + {0x3819, 0x01}, {0x3820, 0x00}, {0x3821, 0x06},
>> + {0x3829, 0x00}, {0x382a, 0x01}, {0x382b, 0x01},
>> + {0x382d, 0x7f}, {0x3830, 0x04}, {0x3836, 0x01},
>> + {0x3837, 0x00}, {0x3841, 0x02}, {0x3846, 0x08},
>> + {0x3847, 0x07}, {0x3d85, 0x36}, {0x3d8c, 0x71},
>> + {0x3d8d, 0xcb}, {0x3f0a, 0x00}, {0x4000, 0xf1},
>> + {0x4001, 0x40}, {0x4002, 0x04}, {0x4003, 0x14},
>> + {0x400e, 0x00}, {0x4011, 0x00}, {0x401a, 0x00},
>> + {0x401b, 0x00}, {0x401c, 0x00}, {0x401d, 0x00},
>> + {0x401f, 0x00}, {0x4020, 0x00}, {0x4021, 0x10},
>> + {0x4022, 0x07}, {0x4023, 0xcf}, {0x4024, 0x09},
>> + {0x4025, 0x60}, {0x4026, 0x09}, {0x4027, 0x6f},
>> + {0x4028, 0x00}, {0x4029, 0x02}, {0x402a, 0x06},
>> + {0x402b, 0x04}, {0x402c, 0x02}, {0x402d, 0x02},
>> + {0x402e, 0x0e}, {0x402f, 0x04}, {0x4302, 0xff},
>> + {0x4303, 0xff}, {0x4304, 0x00}, {0x4305, 0x00},
>> + {0x4306, 0x00}, {0x4308, 0x02}, {0x4500, 0x6c},
>> + {0x4501, 0xc4}, {0x4502, 0x40}, {0x4503, 0x01},
>> + {0x4601, 0xa7}, {0x4800, 0x04}, {0x4813, 0x08},
>> + {0x481f, 0x40}, {0x4829, 0x78}, {0x4837, 0x10},
>> + {0x4b00, 0x2a}, {0x4b0d, 0x00}, {0x4d00, 0x04},
>> + {0x4d01, 0x42}, {0x4d02, 0xd1}, {0x4d03, 0x93},
>> + {0x4d04, 0xf5}, {0x4d05, 0xc1}, {0x5000, 0xf3},
>> + {0x5001, 0x11}, {0x5004, 0x00}, {0x500a, 0x00},
>> + {0x500b, 0x00}, {0x5032, 0x00}, {0x5040, 0x00},
>> + {0x5050, 0x0c}, {0x5500, 0x00}, {0x5501, 0x10},
>> + {0x5502, 0x01}, {0x5503, 0x0f}, {0x8000, 0x00},
>> + {0x8001, 0x00}, {0x8002, 0x00}, {0x8003, 0x00},
>> + {0x8004, 0x00}, {0x8005, 0x00}, {0x8006, 0x00},
>> + {0x8007, 0x00}, {0x8008, 0x00}, {0x3638, 0x00},
>> + {REG_NULL, 0x00},
>> +};
>> +
>> +static const struct ov4689_mode supported_modes[] = {
>> + {
> + .id = OV4689_MODE_2688_1520,
Same.
>> + .width = 2688,
>> + .height = 1520,
>> + .max_fps = 30,
>> + .exp_def = 0x0600,
>> + .hts_def = 0x0a80,
>> + .vts_def = 0x0612,
>> + .reg_list = ov4689_2688x1520_regs,
>> + },
>> +};
>> +
>> +#define OV4689_LINK_FREQ_500MHZ 500000000
>> +static const s64 link_freq_menu_items[] = { OV4689_LINK_FREQ_500MHZ };
>> +
>> +static const char *const ov4689_test_pattern_menu[] = {
>> + "Disabled",
>> + "Vertical Color Bar Type 1",
>> + "Vertical Color Bar Type 2",
>> + "Vertical Color Bar Type 3",
>> + "Vertical Color Bar Type 4"
>> +};
>> +
>> +/* Write registers up to 4 at a time */
>> +static int ov4689_write_reg(struct i2c_client *client, u16 reg, u32 len,
>> + u32 val)
>> +{
>> + u32 buf_i, val_i;
>> + __be32 val_be;
>> + u8 *val_p;
>> + u8 buf[6];
>> +
>> + if (len > 4)
>> + return -EINVAL;
>> +
>> + buf[0] = reg >> 8;
>> + buf[1] = reg & 0xff;
>> +
>> + val_be = cpu_to_be32(val);
>> + val_p = (u8 *)&val_be;
>> + buf_i = 2;
>> + val_i = 4 - len;
>> +
>> + while (val_i < 4)
>> + buf[buf_i++] = val_p[val_i++];
>> +
>> + if (i2c_master_send(client, buf, len + 2) != len + 2)
>> + return -EIO;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_write_array(struct i2c_client *client,
>> + const struct regval *regs)
>> +{
>> + int ret = 0;
>> + u32 i;
>> +
>> + for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
>> + ret = ov4689_write_reg(client, regs[i].addr,
>> + OV4689_REG_VALUE_08BIT, regs[i].val);
>> +
>> + return ret;
>> +}
>> +
>> +/* Read registers up to 4 at a time */
>> +static int ov4689_read_reg(struct i2c_client *client, u16 reg, unsigned int len,
>> + u32 *val)
>> +{
>> + __be16 reg_addr_be = cpu_to_be16(reg);
>> + struct i2c_msg msgs[2];
>> + __be32 data_be = 0;
>> + u8 *data_be_p;
>> + int ret;
>> +
>> + if (len > 4 || !len)
>> + return -EINVAL;
>> +
>> + data_be_p = (u8 *)&data_be;
>> + /* Write register address */
>> + msgs[0].addr = client->addr;
>> + msgs[0].flags = 0;
>> + msgs[0].len = 2;
>> + msgs[0].buf = (u8 *)®_addr_be;
>> +
>> + /* Read data from register */
>> + msgs[1].addr = client->addr;
>> + msgs[1].flags = I2C_M_RD;
>> + msgs[1].len = len;
>> + msgs[1].buf = &data_be_p[4 - len];
>> +
>> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
>> + if (ret != ARRAY_SIZE(msgs))
>> + return -EIO;
>> +
>> + *val = be32_to_cpu(data_be);
>> +
>> + return 0;
>> +}
>> +
>> +static void ov4689_fill_fmt(const struct ov4689_mode *mode,
>> + struct v4l2_mbus_framefmt *fmt)
>> +{
>> + fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
>> + fmt->width = mode->width;
>> + fmt->height = mode->height;
>> + fmt->field = V4L2_FIELD_NONE;
>> +}
>> +
>> +static int ov4689_set_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *sd_state,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> +
>> + /* only one mode supported for now */
>> + ov4689_fill_fmt(ov4689->cur_mode, mbus_fmt);
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_get_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *sd_state,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> +
>> + /* only one mode supported for now */
>> + ov4689_fill_fmt(ov4689->cur_mode, mbus_fmt);
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_enum_mbus_code(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *sd_state,
>> + struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> + if (code->index != 0)
>> + return -EINVAL;
>> + code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_enum_frame_sizes(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *sd_state,
>> + struct v4l2_subdev_frame_size_enum *fse)
>> +{
>> + if (fse->index >= ARRAY_SIZE(supported_modes))
>> + return -EINVAL;
>> +
>> + if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
>> + return -EINVAL;
>> +
>> + fse->min_width = supported_modes[fse->index].width;
>> + fse->max_width = supported_modes[fse->index].width;
>> + fse->max_height = supported_modes[fse->index].height;
>> + fse->min_height = supported_modes[fse->index].height;
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_enable_test_pattern(struct ov4689 *ov4689, u32 pattern)
>> +{
>> + u32 val;
>> +
>> + if (pattern)
>> + val = (pattern - 1) | OV4689_TEST_PATTERN_ENABLE;
>> + else
>> + val = OV4689_TEST_PATTERN_DISABLE;
>> +
>> + return ov4689_write_reg(ov4689->client, OV4689_REG_TEST_PATTERN,
>> + OV4689_REG_VALUE_08BIT, val);
>> +}
>> +
>> +static int ov4689_get_selection(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state,
>> + struct v4l2_subdev_selection *sel)
>> +{
>> + if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
>> + return -EINVAL;
>> +
>> + switch (sel->target) {
>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>> + sel->r.top = 0;
>> + sel->r.left = 0;
>> + sel->r.width = 2720;
>> + sel->r.height = 1536;
>> + return 0;
>> + case V4L2_SEL_TGT_CROP:
>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>> + sel->r.top = 8;
>> + sel->r.left = 16;
>> + sel->r.width = 2688;
>> + sel->r.height = 1520;
>> + return 0;
>> + }
>> + return -EINVAL;
>> +}
>> +
>> +static int ov4689_s_stream(struct v4l2_subdev *sd, int on)
>> +{
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> + struct i2c_client *client = ov4689->client;
>> + int ret = 0;
>> +
>> + mutex_lock(&ov4689->mutex);
>> +
>> + on = !!on;
>> + if (on == ov4689->streaming)
>> + goto unlock_and_return;
>> +
>> + if (on) {
>> + ret = pm_runtime_resume_and_get(&client->dev);
>> + if (ret < 0)
>> + goto unlock_and_return;
>> +
>> + ret = __v4l2_ctrl_handler_setup(&ov4689->ctrl_handler);
>> + if (ret) {
>> + pm_runtime_put(&client->dev);
>> + goto unlock_and_return;
>> + }
>> +
>> + ret = ov4689_write_array(ov4689->client,
>> + ov4689->cur_mode->reg_list);
>> + if (ret) {
>> + pm_runtime_put(&client->dev);
>> + goto unlock_and_return;
>> + }
>> +
>> + ret = ov4689_write_reg(ov4689->client, OV4689_REG_CTRL_MODE,
>> + OV4689_REG_VALUE_08BIT,
>> + OV4689_MODE_STREAMING);
>> + if (ret) {
>> + pm_runtime_put(&client->dev);
>> + goto unlock_and_return;
>> + }
>> + } else {
>> + ov4689_write_reg(ov4689->client, OV4689_REG_CTRL_MODE,
>> + OV4689_REG_VALUE_08BIT,
>> + OV4689_MODE_SW_STANDBY);
>> + pm_runtime_put(&client->dev);
>> + }
>> +
>> + ov4689->streaming = on;
>> +
>> +unlock_and_return:
>> + mutex_unlock(&ov4689->mutex);
>> +
>> + return ret;
>> +}
>> +
>> +/* Calculate the delay in us by clock rate and clock cycles */
>> +static inline u32 ov4689_cal_delay(u32 cycles)
>> +{
>> + return DIV_ROUND_UP(cycles, OV4689_XVCLK_FREQ / 1000 / 1000);
>> +}
>> +
>> +static int __ov4689_power_on(struct ov4689 *ov4689)
>
> Just a doubt on this name function. Why __ ? Is this name reserved for?
Just a leftover from BSP driver, will clean this up in v3.
>> +{
>> + struct device *dev = &ov4689->client->dev;
>> + u32 delay_us;
>> + int ret;
>> +
>> + ret = clk_prepare_enable(ov4689->xvclk);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to enable xvclk\n");
>> + return ret;
>> + }
>> +
>> + gpiod_set_value_cansleep(ov4689->reset_gpio, 1);
>> +
>> + ret = regulator_bulk_enable(OV4689_NUM_SUPPLIES, ov4689->supplies);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to enable regulators\n");
>> + goto disable_clk;
>> + }
>> +
>> + gpiod_set_value_cansleep(ov4689->reset_gpio, 0);
>> + usleep_range(500, 1000);
>> + gpiod_set_value_cansleep(ov4689->pwdn_gpio, 0);
>> +
>> + /* 8192 cycles prior to first SCCB transaction */
>> + delay_us = ov4689_cal_delay(8192);
>> + usleep_range(delay_us, delay_us * 2);
>> +
>> + return 0;
>> +
>> +disable_clk:
>> + clk_disable_unprepare(ov4689->xvclk);
>> +
>> + return ret;
>> +}
>> +
>> +static void __ov4689_power_off(struct ov4689 *ov4689)
>> +{
>> + gpiod_set_value_cansleep(ov4689->pwdn_gpio, 1);
>> + clk_disable_unprepare(ov4689->xvclk);
>> + gpiod_set_value_cansleep(ov4689->reset_gpio, 1);
>> + regulator_bulk_disable(OV4689_NUM_SUPPLIES, ov4689->supplies);
>> +}
>> +
>> +static int __maybe_unused ov4689_runtime_resume(struct device *dev)
>> +{
>> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> +
>> + return __ov4689_power_on(ov4689);
>> +}
>> +
>> +static int __maybe_unused ov4689_runtime_suspend(struct device *dev)
>> +{
>> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> +
>> + __ov4689_power_off(ov4689);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> +static int ov4689_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct ov4689 *ov4689 = to_ov4689(sd);
>> + struct v4l2_mbus_framefmt *try_fmt;
>> +
>> + mutex_lock(&ov4689->mutex);
>> +
>> + try_fmt = v4l2_subdev_get_try_format(sd, fh->state, 0);
>> + /* Initialize try_fmt */
>> + ov4689_fill_fmt(&supported_modes[0], try_fmt);
>
> In this way instead of use magic number we can use this:
>
> ov4689_fill_fmt(&supported_modes[OV4689_MODE_2688_1520], try_fmt);
Ack, will fix in v3.
>> +
>> + mutex_unlock(&ov4689->mutex);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops ov4689_pm_ops = {
>> + SET_RUNTIME_PM_OPS(ov4689_runtime_suspend, ov4689_runtime_resume, NULL)
>> +};
>> +
>> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
>> +static const struct v4l2_subdev_internal_ops ov4689_internal_ops = {
>> + .open = ov4689_open,
>> +};
>> +#endif
>> +
>> +static const struct v4l2_subdev_video_ops ov4689_video_ops = {
>> + .s_stream = ov4689_s_stream,
>> +};
>> +
>> +static const struct v4l2_subdev_pad_ops ov4689_pad_ops = {
>> + .enum_mbus_code = ov4689_enum_mbus_code,
>> + .enum_frame_size = ov4689_enum_frame_sizes,
>> + .get_fmt = ov4689_get_fmt,
>> + .set_fmt = ov4689_set_fmt,
>> + .get_selection = ov4689_get_selection,
>> +};
>> +
>> +static const struct v4l2_subdev_ops ov4689_subdev_ops = {
>> + .video = &ov4689_video_ops,
>> + .pad = &ov4689_pad_ops,
>> +};
>> +
>> +static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct ov4689 *ov4689 =
>> + container_of(ctrl->handler, struct ov4689, ctrl_handler);
>> + struct i2c_client *client = ov4689->client;
>> + s64 max_expo;
>> + int ret;
>> +
>> + /* Propagate change of current control to all related controls */
>> + switch (ctrl->id) {
>> + case V4L2_CID_VBLANK:
>> + /* Update max exposure while meeting expected vblanking */
>> + max_expo = ov4689->cur_mode->height + ctrl->val - 4;
>> + __v4l2_ctrl_modify_range(ov4689->exposure,
>> + ov4689->exposure->minimum, max_expo,
>> + ov4689->exposure->step,
>> + ov4689->exposure->default_value);
>> + break;
>> + }
>> +
>> + if (!pm_runtime_get_if_in_use(&client->dev))
>> + return 0;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_EXPOSURE:
>> + /* 4 least significant bits of expsoure are fractional part */
>> + ret = ov4689_write_reg(ov4689->client, OV4689_REG_EXPOSURE,
>> + OV4689_REG_VALUE_24BIT, ctrl->val << 4);
>> + break;
>> + case V4L2_CID_ANALOGUE_GAIN:
>> + ret = ov4689_write_reg(ov4689->client, OV4689_REG_GAIN_H,
>> + OV4689_REG_VALUE_08BIT,
>> + (ctrl->val >> OV4689_GAIN_H_SHIFT) &
>> + OV4689_GAIN_H_MASK);
>> + ret |= ov4689_write_reg(ov4689->client, OV4689_REG_GAIN_L,
>> + OV4689_REG_VALUE_08BIT,
>> + ctrl->val & OV4689_GAIN_L_MASK);
>> + break;
>> + case V4L2_CID_VBLANK:
>> + ret = ov4689_write_reg(ov4689->client, OV4689_REG_VTS,
>> + OV4689_REG_VALUE_16BIT,
>> + ctrl->val + ov4689->cur_mode->height);
>> + break;
>> + case V4L2_CID_TEST_PATTERN:
>> + ret = ov4689_enable_test_pattern(ov4689, ctrl->val);
>> + break;
>> + default:
>> + dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
>> + __func__, ctrl->id, ctrl->val);
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + pm_runtime_put(&client->dev);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops ov4689_ctrl_ops = {
>> + .s_ctrl = ov4689_set_ctrl,
>> +};
>> +
>> +static int ov4689_initialize_controls(struct ov4689 *ov4689)
>> +{
>> + struct i2c_client *client = v4l2_get_subdevdata(&ov4689->subdev);
>> + struct v4l2_fwnode_device_properties props;
>> + struct v4l2_ctrl_handler *handler;
>> + const struct ov4689_mode *mode;
>> + s64 exposure_max, vblank_def;
>> + struct v4l2_ctrl *ctrl;
>> + u32 h_blank, pixel_rate;
>> + int ret;
>> +
>> + handler = &ov4689->ctrl_handler;
>> + mode = ov4689->cur_mode;
>> + ret = v4l2_ctrl_handler_init(handler, 10);
>> + if (ret)
>> + return ret;
>> + handler->lock = &ov4689->mutex;
>> +
>> + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 0, 0,
>> + link_freq_menu_items);
>> + if (ctrl)
>> + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
>> +
>> + pixel_rate = (link_freq_menu_items[0] * 2 * OV4689_LANES) /
>> + OV4689_BITS_PER_SAMPLE;
>> + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1,
>> + pixel_rate);
>> +
>> + h_blank = mode->hts_def - mode->width;
>> + ov4689->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
>> + h_blank, h_blank, 1, h_blank);
>> + if (ov4689->hblank)
>> + ov4689->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
>> +
>> + vblank_def = mode->vts_def - mode->height;
>> + ov4689->vblank =
>> + v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_VBLANK,
>> + vblank_def, OV4689_VTS_MAX - mode->height, 1,
>> + vblank_def);
>> +
>> + exposure_max = mode->vts_def - 4;
>> + ov4689->exposure =
>> + v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops, V4L2_CID_EXPOSURE,
>> + OV4689_EXPOSURE_MIN, exposure_max,
>> + OV4689_EXPOSURE_STEP, mode->exp_def);
>> +
>> + ov4689->anal_gain =
>> + v4l2_ctrl_new_std(handler, &ov4689_ctrl_ops,
>> + V4L2_CID_ANALOGUE_GAIN, OV4689_GAIN_MIN,
>> + OV4689_GAIN_MAX, OV4689_GAIN_STEP,
>> + OV4689_GAIN_DEFAULT);
>> +
>> + ov4689->test_pattern =
>> + v4l2_ctrl_new_std_menu_items(handler, &ov4689_ctrl_ops,
>> + V4L2_CID_TEST_PATTERN,
>> + ARRAY_SIZE(ov4689_test_pattern_menu) - 1,
>> + 0, 0, ov4689_test_pattern_menu);
>> +
>> + if (handler->error) {
>> + ret = handler->error;
>> + dev_err(&ov4689->client->dev, "Failed to init controls(%d)\n",
>> + ret);
>> + goto err_free_handler;
>> + }
>> +
>> + ret = v4l2_fwnode_device_parse(&client->dev, &props);
>> + if (ret)
>> + goto err_free_handler;
>> +
>> + ret = v4l2_ctrl_new_fwnode_properties(handler, &ov4689_ctrl_ops,
>> + &props);
>> + if (ret)
>> + goto err_free_handler;
>> +
>> + ov4689->subdev.ctrl_handler = handler;
>> +
>> + return 0;
>> +
>> +err_free_handler:
>> + v4l2_ctrl_handler_free(handler);
>> +
>> + return ret;
>> +}
>> +
>> +static int ov4689_check_sensor_id(struct ov4689 *ov4689,
>> + struct i2c_client *client)
>> +{
>> + struct device *dev = &ov4689->client->dev;
>> + u32 id = 0;
>> + int ret;
>> +
>> + ret = ov4689_read_reg(client, OV4689_REG_CHIP_ID,
>> + OV4689_REG_VALUE_16BIT, &id);
>> + if (id != CHIP_ID) {
>> + dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret);
>> + return -ENODEV;
>> + }
>> +
>> + dev_info(dev, "Detected OV%06x sensor\n", CHIP_ID);
>> +
>> + return 0;
>> +}
>> +
>> +static int ov4689_configure_regulators(struct ov4689 *ov4689)
>> +{
>> + unsigned int i;
>> +
>> + for (i = 0; i < OV4689_NUM_SUPPLIES; i++)
>> + ov4689->supplies[i].supply = ov4689_supply_names[i];
>> +
>> + return devm_regulator_bulk_get(&ov4689->client->dev,
>> + OV4689_NUM_SUPPLIES, ov4689->supplies);
>> +}
>> +
>> +static int ov4689_check_hwcfg(struct device *dev)
>> +{
>> + struct fwnode_handle *fwnode = dev_fwnode(dev);
>> + struct v4l2_fwnode_endpoint bus_cfg = {
>> + .bus_type = V4L2_MBUS_CSI2_DPHY,
>> + };
>> + struct fwnode_handle *endpoint;
>> + unsigned int i;
>> + int ret;
>> +
>> + endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL);
>> + if (!endpoint)
>> + return -EPROBE_DEFER;
>> +
>> + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
>> + fwnode_handle_put(endpoint);
>> + if (ret)
>> + return ret;
>> +
>> + if (bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
>> + dev_err(dev, "only a 4-lane CSI2 config is supported");
>> + ret = -EINVAL;
>> + goto out_free_bus_cfg;
>> + }
>> +
>> + if (!bus_cfg.nr_of_link_frequencies) {
>> + dev_err(dev, "no link frequencies defined\n");
>> + ret = -EINVAL;
>> + goto out_free_bus_cfg;
>> + }
>> +
>> + for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
>> + if (bus_cfg.link_frequencies[i] == OV4689_LINK_FREQ_500MHZ)
>> + break;
>> +
>> + if (i == bus_cfg.nr_of_link_frequencies) {
>> + dev_err(dev, "supported link freq %ull not found\n",
>> + OV4689_LINK_FREQ_500MHZ);
>> + ret = -EINVAL;
>> + goto out_free_bus_cfg;
>> + }
>> +
>> +out_free_bus_cfg:
>> + v4l2_fwnode_endpoint_free(&bus_cfg);
>> +
>> + return ret;
>> +}
>> +
>> +static int ov4689_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>
> We are sure that we need need i2c_device_id *id?
I see, will convert to single-argument .probe_new in v3.
>> +{
>> + struct device *dev = &client->dev;
>> + struct v4l2_subdev *sd;
>> + struct ov4689 *ov4689;
>> + int ret;
>> +
>> + ret = ov4689_check_hwcfg(dev);
>> + if (ret)
>> + return ret;
>> +
>> + ov4689 = devm_kzalloc(dev, sizeof(*ov4689), GFP_KERNEL);
>> + if (!ov4689)
>> + return -ENOMEM;
>> +
>> + ov4689->client = client;
>> + ov4689->cur_mode = &supported_modes[0];
>
> Here aswell we can use:
> ov4689->cur_mode = &supported_modes[OV4689_MODE_2688_1520]
Ack.
>> +
>> + ov4689->xvclk = devm_clk_get(dev, "xvclk");
>> + if (IS_ERR(ov4689->xvclk)) {
>> + dev_err(dev, "Failed to get xvclk\n");
>> + return -EINVAL;
>> + }
>
> ^ I think is better to use devm_clk_get_optional instead of clck_get.
> clck_get can fail in CPU's that use ACPI
>
>> +
>> + ret = clk_set_rate(ov4689->xvclk, OV4689_XVCLK_FREQ);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set xvclk rate (24MHz)\n");
>> + return ret;
>> + }
>> + if (clk_get_rate(ov4689->xvclk) != OV4689_XVCLK_FREQ)
>> + dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
>
>
> What do you think about?
> Thanks.
Unfortunately, I have no experience with ACPI-based devices. :(
Do you mean that in the case of an ACPI device and devm_clk_get_optional
returning NULL we should assume that the clock is already enabled and
will stay enabled during sensor operation? How should we distinguish it
from the case of an OF-based system and clock just missing from device
tree?
As a note to myself:
-static const struct ov4689_mode supported_modes[]
+static const struct ov4689_mode supported_modes[OV4689_NUM_MODES]
Overall, thanks for the review!
> Regards,
> Tommaso
>
--
Best regards,
Mikhail Rudenko
Powered by blists - more mailing lists