linux-kernel - [PATCH v2 04/10] clk: mediatek: mt8183: Add clk mux notifier for MFG mux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220915072458.18232-5-angelogioacchino.delregno@collabora.com>
Date:   Thu, 15 Sep 2022 09:24:52 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
To:     matthias.bgg@...il.com
Cc:     mturquette@...libre.com, sboyd@...nel.org,
        angelogioacchino.delregno@...labora.com, wenst@...omium.org,
        miles.chen@...iatek.com, rex-bc.chen@...iatek.com,
        nfraprado@...labora.com, chun-jie.chen@...iatek.com,
        jose.exposito89@...il.com, drinkcat@...omium.org,
        weiyi.lu@...iatek.com, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-clk@...r.kernel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org
Subject: [PATCH v2 04/10] clk: mediatek: mt8183: Add clk mux notifier for MFG mux

From: Chen-Yu Tsai <wenst@...omium.org>

When the MFG PLL clock, which is upstream of the MFG clock, is changed,
the downstream clock and consumers need to be switched away from the PLL
over to a stable clock to avoid glitches.

This is done through the use of the newly added clk mux notifier. The
notifier is set on the mux itself instead of the upstream PLL, but in
practice this works, as the rate change notifitcations are propogated
throughout the sub-tree hanging off the PLL. Just before rate changes,
the MFG mux is temporarily and transparently switched to the 26 MHz
main crystal. After the rate change, the mux is switched back.

Signed-off-by: Chen-Yu Tsai <wenst@...omium.org>
[Angelo: Rebased to assign clk_ops in mtk_mux_nb]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Reviewed-by: Miles Chen <miles.chen@...iatek.com>
---
 drivers/clk/mediatek/clk-mt8183.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c
index 8512101e1189..1860a35a723a 100644
--- a/drivers/clk/mediatek/clk-mt8183.c
+++ b/drivers/clk/mediatek/clk-mt8183.c
@@ -1198,10 +1198,33 @@ static void clk_mt8183_top_init_early(struct device_node *node)
 CLK_OF_DECLARE_DRIVER(mt8183_topckgen, "mediatek,mt8183-topckgen",
 			clk_mt8183_top_init_early);
 
+/* Register mux notifier for MFG mux */
+static int clk_mt8183_reg_mfg_mux_notifier(struct device *dev, struct clk *clk)
+{
+	struct mtk_mux_nb *mfg_mux_nb;
+	int i;
+
+	mfg_mux_nb = devm_kzalloc(dev, sizeof(*mfg_mux_nb), GFP_KERNEL);
+	if (!mfg_mux_nb)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(top_muxes); i++)
+		if (top_muxes[i].id == CLK_TOP_MUX_MFG)
+			break;
+	if (i == ARRAY_SIZE(top_muxes))
+		return -EINVAL;
+
+	mfg_mux_nb->ops = top_muxes[i].ops;
+	mfg_mux_nb->bypass_index = 0; /* Bypass to 26M crystal */
+
+	return devm_mtk_clk_mux_notifier_register(dev, clk, mfg_mux_nb);
+}
+
 static int clk_mt8183_top_probe(struct platform_device *pdev)
 {
 	void __iomem *base;
 	struct device_node *node = pdev->dev.of_node;
+	int ret;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
@@ -1227,6 +1250,11 @@ static int clk_mt8183_top_probe(struct platform_device *pdev)
 	mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
 		top_clk_data);
 
+	ret = clk_mt8183_reg_mfg_mux_notifier(&pdev->dev,
+					      top_clk_data->hws[CLK_TOP_MUX_MFG]->clk);
+	if (ret)
+		return ret;
+
 	return of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
 				      top_clk_data);
 }
-- 
2.37.2