| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220915080828.2894070-1-quan@os.amperecomputing.com>
Date: Thu, 15 Sep 2022 15:08:28 +0700
From: Quan Nguyen <quan@...amperecomputing.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>, openbmc@...ts.ozlabs.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Open Source Submission <patches@...erecomputing.com>
Cc: quan@...amperecomputing.com,
Phong Vo <phong@...amperecomputing.com>,
Thang Nguyen <thang@...amperecomputing.com>
Subject: [PATCH] ARM: dts: aspeed: mtjade: Remove gpio-keys entries
Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@...amperecomputing.com>
---
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 95 -------------------
1 file changed, 95 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 82a6f14a45f0..d127cbcc7998 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -97,101 +97,6 @@ identify {
};
};
- gpio-keys {
- compatible = "gpio-keys";
-
- event-shutdown-ack {
- label = "SHUTDOWN_ACK";
- gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(G, 2)>;
- };
-
- event-reboot-ack {
- label = "REBOOT_ACK";
- gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 3)>;
- };
-
- event-s0-overtemp {
- label = "S0_OVERTEMP";
- gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(G, 3)>;
- };
-
- event-s0-hightemp {
- label = "S0_HIGHTEMP";
- gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 0)>;
- };
-
- event-s0-cpu-fault {
- label = "S0_CPU_FAULT";
- gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
- linux,code = <ASPEED_GPIO(J, 1)>;
- };
-
- event-s0-scp-auth-fail {
- label = "S0_SCP_AUTH_FAIL";
- gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 2)>;
- };
-
- event-s1-scp-auth-fail {
- label = "S1_SCP_AUTH_FAIL";
- gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Z, 5)>;
- };
-
- event-s1-overtemp {
- label = "S1_OVERTEMP";
- gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Z, 6)>;
- };
-
- event-s1-hightemp {
- label = "S1_HIGHTEMP";
- gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(AB, 0)>;
- };
-
- event-s1-cpu-fault {
- label = "S1_CPU_FAULT";
- gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
- linux,code = <ASPEED_GPIO(Z, 1)>;
- };
-
- event-id {
- label = "ID_BUTTON";
- gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Q, 5)>;
- };
-
- event-psu1-vin-good {
- label = "PSU1_VIN_GOOD";
- gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(H, 4)>;
- };
-
- event-psu2-vin-good {
- label = "PSU2_VIN_GOOD";
- gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(H, 5)>;
- };
-
- event-psu1-present {
- label = "PSU1_PRESENT";
- gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(I, 0)>;
- };
-
- event-psu2-present {
- label = "PSU2_PRESENT";
- gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(I, 1)>;
- };
-
- };
-
gpioA0mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
--
2.35.1
Powered by blists - more mailing lists