linux-kernel - Re: x15: kernel crash: LR is at sysc_enable_opt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+G9fYsUEmhHT_YsZSvLBiUStuTPJ_DW4Gp0=p7umvfpngSABA@mail.gmail.com>
Date:   Thu, 15 Sep 2022 17:25:12 +0530
From:   Naresh Kamboju <naresh.kamboju@...aro.org>
To:     Arnd Bergmann <arnd@...db.de>
Cc:     Tony Lindgren <tony@...mide.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Linux-OMAP <linux-omap@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        lkft-triage@...ts.linaro.org
Subject: Re: x15: kernel crash: LR is at sysc_enable_opt_clocks

Hi Arnd,

On Wed, 14 Sept 2022 at 19:19, Arnd Bergmann <arnd@...db.de> wrote:
>
> On Wed, Sep 14, 2022, at 2:46 PM, Naresh Kamboju wrote:
> > Following kernel crash noticed on arm TI x15 device while booting the
> > mainline kernel 6.0.0-rc4.
> >
> > Reported-by: Linux Kernel Functional Testing <lkft@...aro.org>
> > [    3.059600] random: crng init done
> > [    3.059631] 8<--- cut here ---
> > [    3.066101] Unable to handle kernel paging request at virtual
> > address adacafae
> > [    3.073394] [adacafae] *pgd=00000000
> > [    3.076995] Internal error: Oops: 5 [#1] SMP ARM
>
>
> > [    3.781494]  clk_enable from sysc_enable_opt_clocks+0x4c/0xa0
> > [    3.787261]  sysc_enable_opt_clocks from sysc_probe+0xda0/0x1598
> > [    3.793304]  sysc_probe from platform_probe+0x64/0xc0
>
> So it's getting an invalid clk pointer in sysc_enable_opt_clocks.
>
> > [    3.798400]  platform_probe from really_probe+0xe8/0x41c
> > [    3.803741]  really_probe from __driver_probe_device+0xa8/0x20c
> > [    3.809692]  __driver_probe_device from driver_probe_device+0x38/0xc8
> > [    3.816192]  driver_probe_device from __device_attach_driver+0xb4/0x130
> > [    3.822845]  __device_attach_driver from bus_for_each_drv+0x84/0xc8
> > [    3.829162]  bus_for_each_drv from __device_attach+0xb0/0x210
> > [    3.834930]  __device_attach from bus_probe_device+0x8c/0x94
> > [    3.840637]  bus_probe_device from device_add+0x3ec/0x924
> > [    3.846069]  device_add from of_platform_device_create_pdata+0x98/0xc8
> > [    3.852630]  of_platform_device_create_pdata from
> > of_platform_bus_create+0x200/0x4d8
> > [    3.860412]  of_platform_bus_create from of_platform_populate+0x9c/0x138
> > [    3.867156]  of_platform_populate from simple_pm_bus_probe+0xac/0xd0
> > [    3.873565]  simple_pm_bus_probe from platform_probe+0x64/0xc0
> > [    3.879425]  platform_probe from really_probe+0xe8/0x41c
>
> It looks strange to recursively go through simple_pm_bus_probe()
> here four times before getting to the ti,sysc driver.
>
> >
> > Full test log link,
> >   - https://lkft.validation.linaro.org/scheduler/job/5508159
> >
>
> What is the easiest way to find out how long this job
> has been failing, and what the last successful build
> was?

It is not reproducible easily and I have checked when it got
started but failed to find it. Because on v6.0-rc3 kernel the x15
did not boot pass.

- Naresh