linux-kernel - Re: [PATCH v2 2/3] clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220916194129.nhkghyalyfoapabj@builder.lan>
Date:   Fri, 16 Sep 2022 14:41:29 -0500
From:   Bjorn Andersson <andersson@...nel.org>
To:     Rajendra Nayak <quic_rjendra@...cinc.com>
Cc:     agross@...nel.org, konrad.dybcio@...ainline.org,
        mturquette@...libre.com, sboyd@...nel.org, mka@...omium.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        johan+linaro@...nel.org, quic_kriskura@...cinc.com,
        dianders@...omium.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH v2 2/3] clk: qcom: gcc-sc7180: Update the .pwrsts for usb
 gdsc

On Fri, Sep 16, 2022 at 02:06:58PM -0500, Bjorn Andersson wrote:
> On Fri, Sep 16, 2022 at 03:54:16PM +0530, Rajendra Nayak wrote:
> > The USB controller on sc7180 does not retain the state when
> > the system goes into low power state and the GDSC is
> > turned off. This results in the controller reinitializing and
> > re-enumerating all the connected devices (resulting in additional
> > delay while coming out of suspend)
> > Fix this by updating the .pwrsts for the USB GDSC so it only
> > transitions to retention state in low power.
> > 
> > Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
> > Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
> > Tested-by: Matthias Kaehlcke <mka@...omium.org>
> > ---
> > v2:
> > Updated the changelog
> > 
> >  drivers/clk/qcom/gcc-sc7180.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> > index c2ea09945c47..2d3980251e78 100644
> > --- a/drivers/clk/qcom/gcc-sc7180.c
> > +++ b/drivers/clk/qcom/gcc-sc7180.c
> > @@ -2224,7 +2224,7 @@ static struct gdsc usb30_prim_gdsc = {
> >  	.pd = {
> >  		.name = "usb30_prim_gdsc",
> >  	},
> > -	.pwrsts = PWRSTS_OFF_ON,
> > +	.pwrsts = PWRSTS_RET_ON,
> 
> I presume the same should be applied to gcc_usb30_sec_gdsc?
> 

Please ignore that, missed the '1' in the filename.

Reviewed-by: Bjorn Andersson <andersson@...nel.org>

Regards,
Bjorn