lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220916091348.8570-3-arun.ramadoss@microchip.com>
Date:   Fri, 16 Sep 2022 14:43:44 +0530
From:   Arun Ramadoss <arun.ramadoss@...rochip.com>
To:     <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC:     <woojung.huh@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
        <andrew@...n.ch>, <vivien.didelot@...il.com>,
        <f.fainelli@...il.com>, <olteanv@...il.com>, <davem@...emloft.net>,
        <edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
        <linux@...linux.org.uk>, <Tristram.Ha@...rochip.com>,
        <arun.ramadoss@...rochip.com>,
        <prasanna.vengateshan@...rochip.com>, <hkallweit1@...il.com>
Subject: [Patch net-next v3 2/6] net: dsa: microchip: enable phy interrupts only if interrupt enabled in dts

In the lan937x_mdio_register function, phy interrupts are enabled
irrespective of irq is enabled in the switch. Now, the check is added to
enable the phy interrupt only if the irq is enabled in the switch.

Signed-off-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/dsa/microchip/lan937x_main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 7136d9c55315..1f4472c90a1f 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -235,15 +235,18 @@ static int lan937x_mdio_register(struct ksz_device *dev)
 
 	ds->slave_mii_bus = bus;
 
-	ret = lan937x_irq_phy_setup(dev);
-	if (ret)
-		return ret;
+	if (dev->irq > 0) {
+		ret = lan937x_irq_phy_setup(dev);
+		if (ret)
+			return ret;
+	}
 
 	ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
 	if (ret) {
 		dev_err(ds->dev, "unable to register MDIO bus %s\n",
 			bus->id);
-		lan937x_irq_phy_free(dev);
+		if (dev->irq > 0)
+			lan937x_irq_phy_free(dev);
 	}
 
 	of_node_put(mdio_np);
-- 
2.36.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ