lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220916102340.11520-12-johan+linaro@kernel.org>
Date:   Fri, 16 Sep 2022 12:23:40 +0200
From:   Johan Hovold <johan+linaro@...nel.org>
To:     Vinod Koul <vkoul@...nel.org>
Cc:     Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 11/11] phy: qcom-qmp-usb: drop legacy DT workaround

Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT
registers") added a workaround for legacy devicetrees which did not
specify register regions for the second lane of some dual-lane PHYs.

At the time, the only two dual-lane PHYs supported by mainline were
"qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy" and they had
been added to the binding less than six months before the binding was
fixed.

Presumably no one is using four-year old SDM845 dtbs with mainline
anymore so drop the workaround for malformed devicetrees. In the
unlikely event that anyone complains, we can consider reverting.

Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 27 ++++++-------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 41513cef3d99..93994f1a46e2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -66,9 +66,6 @@
 #define POWER_DOWN_DELAY_US_MIN			10
 #define POWER_DOWN_DELAY_US_MAX			11
 
-/* Define the assumed distance between lanes for underspecified device trees. */
-#define QMP_PHY_LEGACY_LANE_STRIDE		0x400
-
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
@@ -2667,28 +2664,16 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 	if (cfg->pcs_usb_offset)
 		qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
 
-	/*
-	 * If this is a dual-lane PHY, then there should be registers for the
-	 * second lane. Some old device trees did not specify this, so fall
-	 * back to old legacy behavior of assuming they can be reached at an
-	 * offset from the first lane.
-	 */
 	if (cfg->is_dual_lane_phy) {
 		qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
-		qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
-		if (IS_ERR(qphy->tx2) || IS_ERR(qphy->rx2)) {
-			dev_warn(dev,
-				 "Underspecified device tree, falling back to legacy register regions\n");
+		if (IS_ERR(qphy->tx2))
+			return PTR_ERR(qphy->tx2);
 
-			/* In the old version, pcs_misc is at index 3. */
-			qphy->pcs_misc = qphy->tx2;
-			qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
-			qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
-
-		} else {
-			qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
-		}
+		qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
+		if (IS_ERR(qphy->rx2))
+			return PTR_ERR(qphy->rx2);
 
+		qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
 	} else {
 		qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
 	}
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ