| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YyRxp7pDCyikNLGc@lab.hqhome163.com>
Date: Fri, 16 Sep 2022 12:52:55 +0000
From: Alessandro Carminati <alessandro.carminati@...il.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] dt-bindings: rockchip: k3566-quartz64-a: fix names
entries, refactor
Fix esisting "No underscores in node names" general rule, and prepare for
new board versions.
Signed-off-by: Alessandro Carminati <alessandro.carminati@...il.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 2 +-
...-quartz64-a.dts => rk3566-quartz64-a.dtsi} | 27 ++++++++-----------
.../dts/rockchip/rk3566-quartz64-a.usb3.dts | 9 +++++++
3 files changed, 21 insertions(+), 17 deletions(-)
rename arch/arm64/boot/dts/rockchip/{rk3566-quartz64-a.dts => rk3566-quartz64-a.dtsi} (97%)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ef79a672804a..97ec6c156346 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -59,7 +59,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.usb3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
similarity index 97%
rename from arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
rename to arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
index d943559b157c..ac3da5b2c1b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
@@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
#clock-cells = <0>;
};
- fan: gpio_fan {
+ fan: fan {
compatible = "gpio-fan";
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
@@ -38,7 +38,7 @@ fan: gpio_fan {
#cooling-cells = <2>;
};
- hdmi-con {
+ hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -116,7 +116,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v_dcin {
+ vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -139,7 +139,7 @@ vbus: vbus {
vin-supply = <&vcc12v_dcin>;
};
- vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+ vcc3v3_pcie_p: vcc3v3-p {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -151,7 +151,7 @@ vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
vin-supply = <&vcc_3v3>;
};
- vcc5v0_usb: vcc5v0_usb {
+ vcc5v0_usb: vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -165,7 +165,7 @@ vcc5v0_usb: vcc5v0_usb {
* the host ports are sourced from vcc5v0_usb
* the otg port is sourced from vcc5v0_midu
*/
- vcc5v0_usb20_host: vcc5v0_usb20_host {
+ vcc5v0_usb20_host: vcc5v0-usb20-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -177,7 +177,7 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
vin-supply = <&vcc5v0_usb>;
};
- vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+ vcc5v0_usb20_otg: vcc5v0-usb20-otg {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -187,7 +187,7 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
vin-supply = <&dcdc_boost>;
};
- vcc3v3_sd: vcc3v3_sd {
+ vcc3v3_sd: vcc3v3-sd {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -201,7 +201,7 @@ vcc3v3_sd: vcc3v3_sd {
};
/* sourced from vbus and vcc_bat+ via rk817 sw5 */
- vcc_sys: vcc_sys {
+ vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
@@ -212,7 +212,7 @@ vcc_sys: vcc_sys {
};
/* sourced from vcc_sys, sdio module operates internally at 3.3v */
- vcc_wl: vcc_wl {
+ vcc_wl: vcc-wl {
compatible = "regulator-fixed";
regulator-name = "vcc_wl";
regulator-always-on;
@@ -249,7 +249,7 @@ &cpu3 {
&cpu_thermal {
trips {
- cpu_hot: cpu_hot {
+ cpu_hot: cpu-hot {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
@@ -788,11 +788,6 @@ &usb_host0_xhci {
status = "okay";
};
-/* usb3 controller is muxed with sata1 */
-&usb_host1_xhci {
- status = "okay";
-};
-
&usb2phy0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
new file mode 100644
index 000000000000..1739c00ea9e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-quartz64-a.dtsi"
+
+&usb_host1_xhci {
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists