| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 17 Sep 2022 18:38:37 +0800
From: Haoyue Xu <xuhaoyue1@...ilicon.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <michal.simek@...inx.com>
CC: <huangdaode@...wei.com>, <liyangyang20@...wei.com>,
<xuhaoyue1@...ilicon.com>, <huangjunxian6@...ilicon.com>,
<linuxarm@...wei.com>, <liangwenpeng@...wei.com>
Subject: [PATCH net-next 1/7] net: ll_temac: fix the format of block comments
From: huangjunxian <huangjunxian6@...ilicon.com>
Cleaning some static warnings of block comments.
Signed-off-by: huangjunxian <huangjunxian6@...ilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@...ilicon.com>
---
drivers/net/ethernet/xilinx/ll_temac.h | 181 ++++++++++----------
drivers/net/ethernet/xilinx/ll_temac_main.c | 6 +-
drivers/net/ethernet/xilinx/ll_temac_mdio.c | 6 +-
3 files changed, 103 insertions(+), 90 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index c6395c406418..6668d1b760d8 100644
--- a/drivers/net/ethernet/xilinx/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -21,36 +21,45 @@
/* Configuration options */
/* Accept all incoming packets.
- * This option defaults to disabled (cleared) */
+ * This option defaults to disabled (cleared)
+ */
#define XTE_OPTION_PROMISC (1 << 0)
/* Jumbo frame support for Tx & Rx.
- * This option defaults to disabled (cleared) */
+ * This option defaults to disabled (cleared)
+ */
#define XTE_OPTION_JUMBO (1 << 1)
/* VLAN Rx & Tx frame support.
- * This option defaults to disabled (cleared) */
+ * This option defaults to disabled (cleared)
+ */
#define XTE_OPTION_VLAN (1 << 2)
/* Enable recognition of flow control frames on Rx
- * This option defaults to enabled (set) */
+ * This option defaults to enabled (set)
+ */
#define XTE_OPTION_FLOW_CONTROL (1 << 4)
/* Strip FCS and PAD from incoming frames.
* Note: PAD from VLAN frames is not stripped.
- * This option defaults to disabled (set) */
+ * This option defaults to disabled (set)
+ */
#define XTE_OPTION_FCS_STRIP (1 << 5)
/* Generate FCS field and add PAD automatically for outgoing frames.
- * This option defaults to enabled (set) */
+ * This option defaults to enabled (set)
+ */
#define XTE_OPTION_FCS_INSERT (1 << 6)
/* Enable Length/Type error checking for incoming frames. When this option is
-set, the MAC will filter frames that have a mismatched type/length field
-and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
-types of frames are encountered. When this option is cleared, the MAC will
-allow these types of frames to be received.
-This option defaults to enabled (set) */
+ * set, the MAC will filter frames that have a mismatched type/length field
+ * and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+ * types of frames are encountered. When this option is cleared, the MAC will
+ * allow these types of frames to be received.
+ * This option defaults to enabled (set)
+ */
#define XTE_OPTION_LENTYPE_ERR (1 << 7)
/* Enable the transmitter.
- * This option defaults to enabled (set) */
+ * This option defaults to enabled (set)
+ */
#define XTE_OPTION_TXEN (1 << 11)
/* Enable the receiver
-* This option defaults to enabled (set) */
+ * This option defaults to enabled (set)
+ */
#define XTE_OPTION_RXEN (1 << 12)
/* Default options set when device is initialized or reset */
@@ -68,18 +77,18 @@ This option defaults to enabled (set) */
#define TX_TAILDESC_PTR 0x04 /* rw */
#define TX_CHNL_CTRL 0x05 /* rw */
/*
- 0:7 24:31 IRQTimeout
- 8:15 16:23 IRQCount
- 16:20 11:15 Reserved
- 21 10 0
- 22 9 UseIntOnEnd
- 23 8 LdIRQCnt
- 24 7 IRQEn
- 25:28 3:6 Reserved
- 29 2 IrqErrEn
- 30 1 IrqDlyEn
- 31 0 IrqCoalEn
-*/
+ * 0:7 24:31 IRQTimeout
+ * 8:15 16:23 IRQCount
+ * 16:20 11:15 Reserved
+ * 21 10 0
+ * 22 9 UseIntOnEnd
+ * 23 8 LdIRQCnt
+ * 24 7 IRQEn
+ * 25:28 3:6 Reserved
+ * 29 2 IrqErrEn
+ * 30 1 IrqDlyEn
+ * 31 0 IrqCoalEn
+ */
#define CHNL_CTRL_IRQ_IOE (1 << 9)
#define CHNL_CTRL_IRQ_EN (1 << 7)
#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
@@ -87,35 +96,35 @@ This option defaults to enabled (set) */
#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
#define TX_IRQ_REG 0x06 /* rw */
/*
- 0:7 24:31 DltTmrValue
- 8:15 16:23 ClscCntrValue
- 16:17 14:15 Reserved
- 18:21 10:13 ClscCnt
- 22:23 8:9 DlyCnt
- 24:28 3::7 Reserved
- 29 2 ErrIrq
- 30 1 DlyIrq
- 31 0 CoalIrq
+ * 0:7 24:31 DltTmrValue
+ * 8:15 16:23 ClscCntrValue
+ * 16:17 14:15 Reserved
+ * 18:21 10:13 ClscCnt
+ * 22:23 8:9 DlyCnt
+ * 24:28 3::7 Reserved
+ * 29 2 ErrIrq
+ * 30 1 DlyIrq
+ * 31 0 CoalIrq
*/
#define TX_CHNL_STS 0x07 /* r */
/*
- 0:9 22:31 Reserved
- 10 21 TailPErr
- 11 20 CmpErr
- 12 19 AddrErr
- 13 18 NxtPErr
- 14 17 CurPErr
- 15 16 BsyWr
- 16:23 8:15 Reserved
- 24 7 Error
- 25 6 IOE
- 26 5 SOE
- 27 4 Cmplt
- 28 3 SOP
- 29 2 EOP
- 30 1 EngBusy
- 31 0 Reserved
-*/
+ * 0:9 22:31 Reserved
+ * 10 21 TailPErr
+ * 11 20 CmpErr
+ * 12 19 AddrErr
+ * 13 18 NxtPErr
+ * 14 17 CurPErr
+ * 15 16 BsyWr
+ * 16:23 8:15 Reserved
+ * 24 7 Error
+ * 25 6 IOE
+ * 26 5 SOE
+ * 27 4 Cmplt
+ * 28 3 SOP
+ * 29 2 EOP
+ * 30 1 EngBusy
+ * 31 0 Reserved
+ */
#define RX_NXTDESC_PTR 0x08 /* r */
#define RX_CURBUF_ADDR 0x09 /* r */
@@ -124,17 +133,17 @@ This option defaults to enabled (set) */
#define RX_TAILDESC_PTR 0x0c /* rw */
#define RX_CHNL_CTRL 0x0d /* rw */
/*
- 0:7 24:31 IRQTimeout
- 8:15 16:23 IRQCount
- 16:20 11:15 Reserved
- 21 10 0
- 22 9 UseIntOnEnd
- 23 8 LdIRQCnt
- 24 7 IRQEn
- 25:28 3:6 Reserved
- 29 2 IrqErrEn
- 30 1 IrqDlyEn
- 31 0 IrqCoalEn
+ * 0:7 24:31 IRQTimeout
+ * 8:15 16:23 IRQCount
+ * 16:20 11:15 Reserved
+ * 21 10 0
+ * 22 9 UseIntOnEnd
+ * 23 8 LdIRQCnt
+ * 24 7 IRQEn
+ * 25:28 3:6 Reserved
+ * 29 2 IrqErrEn
+ * 30 1 IrqDlyEn
+ * 31 0 IrqCoalEn
*/
#define RX_IRQ_REG 0x0e /* rw */
#define IRQ_COAL (1 << 0)
@@ -142,13 +151,13 @@ This option defaults to enabled (set) */
#define IRQ_ERR (1 << 2)
#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
/*
- 0:7 24:31 DltTmrValue
- 8:15 16:23 ClscCntrValue
- 16:17 14:15 Reserved
- 18:21 10:13 ClscCnt
- 22:23 8:9 DlyCnt
- 24:28 3::7 Reserved
-*/
+ * 0:7 24:31 DltTmrValue
+ * 8:15 16:23 ClscCntrValue
+ * 16:17 14:15 Reserved
+ * 18:21 10:13 ClscCnt
+ * 22:23 8:9 DlyCnt
+ * 24:28 3::7 Reserved
+ */
#define RX_CHNL_STS 0x0f /* r */
#define CHNL_STS_ENGBUSY (1 << 1)
#define CHNL_STS_EOP (1 << 2)
@@ -165,23 +174,23 @@ This option defaults to enabled (set) */
#define CHNL_STS_CMPERR (1 << 20)
#define CHNL_STS_TAILERR (1 << 21)
/*
- 0:9 22:31 Reserved
- 10 21 TailPErr
- 11 20 CmpErr
- 12 19 AddrErr
- 13 18 NxtPErr
- 14 17 CurPErr
- 15 16 BsyWr
- 16:23 8:15 Reserved
- 24 7 Error
- 25 6 IOE
- 26 5 SOE
- 27 4 Cmplt
- 28 3 SOP
- 29 2 EOP
- 30 1 EngBusy
- 31 0 Reserved
-*/
+ * 0:9 22:31 Reserved
+ * 10 21 TailPErr
+ * 11 20 CmpErr
+ * 12 19 AddrErr
+ * 13 18 NxtPErr
+ * 14 17 CurPErr
+ * 15 16 BsyWr
+ * 16:23 8:15 Reserved
+ * 24 7 Error
+ * 25 6 IOE
+ * 26 5 SOE
+ * 27 4 Cmplt
+ * 28 3 SOP
+ * 29 2 EOP
+ * 30 1 EngBusy
+ * 31 0 Reserved
+ */
#define DMA_CONTROL_REG 0x10 /* rw */
#define DMA_CONTROL_RST (1 << 0)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 3f6b9dfca095..1dfbd85b848d 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -430,7 +430,8 @@ static void temac_do_set_mac_address(struct net_device *ndev)
(ndev->dev_addr[2] << 16) |
(ndev->dev_addr[3] << 24));
/* There are reserved bits in EUAW1
- * so don't affect them Set MAC bits [47:32] in EUAW1 */
+ * so don't affect them Set MAC bits [47:32] in EUAW1
+ */
temac_indirect_out32_locked(lp, XTE_UAW1_OFFSET,
(ndev->dev_addr[4] & 0x000000ff) |
(ndev->dev_addr[5] << 8));
@@ -691,7 +692,8 @@ static void temac_device_reset(struct net_device *ndev)
spin_unlock_irqrestore(lp->indirect_lock, flags);
/* Sync default options with HW
- * but leave receiver and transmitter disabled. */
+ * but leave receiver and transmitter disabled.
+ */
temac_setoptions(ndev,
lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
diff --git a/drivers/net/ethernet/xilinx/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
index 6fd2dea4e60f..2371c072b53f 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_mdio.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
@@ -29,7 +29,8 @@ static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
/* Write the PHY address to the MIIM Access Initiator register.
* When the transfer completes, the PHY register value will appear
- * in the LSW0 register */
+ * in the LSW0 register
+ */
spin_lock_irqsave(lp->indirect_lock, flags);
temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET);
@@ -88,7 +89,8 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
}
/* Enable the MDIO bus by asserting the enable bit and writing
- * in the clock config */
+ * in the clock config
+ */
temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
bus = devm_mdiobus_alloc(&pdev->dev);
--
2.30.0
Powered by blists - more mailing lists