lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <YyizYqHFG3vKrKFU@spud>
Date:   Mon, 19 Sep 2022 19:22:26 +0100
From:   Conor Dooley <conor@...nel.org>
To:     Conor Dooley <conor.dooley@...rochip.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Daire McNamara <daire.mcnamara@...rochip.com>,
        Shravan Chippa <shravan.chippa@...rochip.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Cyril Jean <Cyril.Jean@...rochip.com>,
        Lewis Hanly <lewis.hanly@...rochip.com>,
        Vattipalli Praveen <praveen.kumar@...rochip.com>,
        Wolfgang Grandegger <wg@...es-embedded.de>,
        Hugh Breslin <hugh.breslin@...rochip.com>,
        devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 00/10] New PolarFire SoC devkit devicetrees & 22.09
 reference design updates

On Fri, Sep 16, 2022 at 12:26:36PM +0100, Conor Dooley wrote:
> Hey all,
> 
> Some 6.1 targeted changes here.
> Firstly, two new dev kits (one first-party & one from Aries Embedded).
> They've been sitting in our vendor tree, so are being sent where they
> belong.
> 
> Secondly, another release of our reference design for the Icicle kit
> is due in September. Usually these do not really change much for the
> devicetree, but this time around a pair of changes impact the memory
> map.
> 
> The first of these is adding dma-ranges to the pcie controller. The
> controller had some issues to begin with & with the current reference
> design (v2022.05) would not work with mainline Linux nor has it since
> reference design v2021.08. A combination of the property, a change
> to the FPGA design & a small fix to the driver will get it working
> with mainline again. The other non-backwards compatible change to the
> reference design is moves of the peripherals instantiated in the
> fabric. Currently they are fairly spread out & a common complaint has
> been that this leaves little room in the fic3 section of the memory map
> for custom peripherals without removing the existing ones.
> 
> This series depends on [0] so as not to add dtbs_check warnings. The
> fabric clock support is added by [1].

I've pushed this series to dt-for-next:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/log/?h=dt-for-next

There's a minor conflict with dt-fixes as that branch deletes a property
from the pcie dt node which is moved in this series. I deleted the
property as I moved it in this series so the fix will be to take the
version in dt-for-next instead.

> 
> Thanks,
> Conor.
> 
> Changes since v4:
> - fix the incompatible interrupts on m100pfsevp
> 
> Changes since v3:
> - add an extra patch reducing the fic3 clock rate
> 
> Changes since v2:
> - drop the sd & emmc versions of the aries devicetree
> - remove a extra newline
> 
> Changes since v1:
> - made the polarberry part of an enum in patch 1
> 
> 0 - https://lore.kernel.org/linux-gpio/20220825143522.3102546-1-conor.dooley@microchip.com/
> 1 - https://lore.kernel.org/linux-clk/20220824093342.187844-1-conor.dooley@microchip.com/
> 
> Conor Dooley (8):
>   dt-bindings: riscv: microchip: document icicle reference design
>   dt-bindings: riscv: microchip: document the aries m100pfsevp
>   riscv: dts: microchip: add pci dma ranges for the icicle kit
>   riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi
>   riscv: dts: microchip: icicle: update pci address properties
>   riscv: dts: microchip: icicle: re-jig fabric peripheral addresses
>   riscv: dts: microchip: reduce the fic3 clock rate
>   riscv: dts: microchip: add a devicetree for aries' m100pfsevp
> 
> Shravan Chippa (1):
>   dt-bindings: riscv: microchip: document the sev kit
> 
> Vattipalli Praveen (1):
>   riscv: dts: microchip: add sevkit device tree
> 
>  .../devicetree/bindings/riscv/microchip.yaml  |  20 +-
>  arch/riscv/boot/dts/microchip/Makefile        |   2 +
>  .../dts/microchip/mpfs-icicle-kit-fabric.dtsi |  44 ++++-
>  .../boot/dts/microchip/mpfs-icicle-kit.dts    |   3 +-
>  .../dts/microchip/mpfs-m100pfs-fabric.dtsi    |  45 +++++
>  .../boot/dts/microchip/mpfs-m100pfsevp.dts    | 179 ++++++++++++++++++
>  .../dts/microchip/mpfs-polarberry-fabric.dtsi |  29 +++
>  .../dts/microchip/mpfs-sev-kit-fabric.dtsi    |  45 +++++
>  .../riscv/boot/dts/microchip/mpfs-sev-kit.dts | 145 ++++++++++++++
>  arch/riscv/boot/dts/microchip/mpfs.dtsi       |  29 ---
>  10 files changed, 499 insertions(+), 42 deletions(-)
>  create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi
>  create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts
>  create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
>  create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
> 
> -- 
> 2.36.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ