[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220919143627.13803-1-vidyas@nvidia.com>
Date: Mon, 19 Sep 2022 20:06:18 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: <lpieralisi@...nel.org>, <robh@...nel.org>, <kw@...ux.com>,
<bhelgaas@...gle.com>, <thierry.reding@...il.com>,
<jonathanh@...dia.com>, <kishon@...com>, <vkoul@...nel.org>,
<mani@...nel.org>, <Sergey.Semin@...kalelectronics.ru>,
<ffclaire1224@...il.com>
CC: <linux-pci@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<kthota@...dia.com>, <mmaddireddy@...dia.com>, <vidyas@...dia.com>,
<sagar.tv@...il.com>
Subject: [PATCH V1 0/9] Enhancements to pcie-tegra194 driver
This patch series contains enhancements to the pcie-tegra194.c driver
that works for both Tegra194 and Tegra234 SoCs and for both RootPort
and Endpoint modes.
Vidya Sagar (9):
PCI: tegra194: Use devm_gpiod_get_optional() to parse
"nvidia,refclk-select"
PCI: tegra194: Drive CLKREQ signal low explicitly
PCI: tegra194: Fix polling delay for L2 state
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
PCI: tegra194: Refactor LTSSM state polling on surprise down
PCI: tegra194: Disable direct speed change for EP
phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration
PCI: tegra194: Calibrate P2U for endpoint mode
drivers/pci/controller/dwc/pcie-tegra194.c | 126 +++++++++++++++------
drivers/phy/tegra/phy-tegra194-p2u.c | 14 +++
2 files changed, 104 insertions(+), 36 deletions(-)
--
2.17.1
Powered by blists - more mailing lists