lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220920-i350-thermal-up-v5-2-123bc852d199@baylibre.com>
Date:   Tue, 20 Sep 2022 17:03:49 +0200
From:   Amjad Ouled-Ameur <aouledameur@...libre.com>
To:     Amit Kucheria <amitk@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Fabien Parent <fparent@...libre.com>,
        Hsin-Yi Wang <hsinyi@...omium.org>,
        Markus Schneider-Pargmann <msp@...libre.com>,
        linux-pm@...r.kernel.org,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Michael Kao <michael.kao@...iatek.com>,
        Amjad Ouled-Ameur <aouledameur@...libre.com>,
        Rob Herring <robh@...nel.org>, linux-kernel@...r.kernel.org,
        linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v5 2/4] thermal: mediatek: control buffer enablement tweaks

From: Markus Schneider-Pargmann <msp@...libre.com>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
Signed-off-by: Fabien Parent <fparent@...libre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@...libre.com>

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 8440692e3890..d8ddceb75372 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -271,6 +271,9 @@ struct mtk_thermal_data {
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
 	enum mtk_thermal_version version;
+	u32 apmixed_buffer_ctl_reg;
+	u32 apmixed_buffer_ctl_mask;
+	u32 apmixed_buffer_ctl_set;
 };
 
 struct mtk_thermal {
@@ -514,6 +517,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
 	.version = MTK_THERMAL_V2,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
+	.apmixed_buffer_ctl_set = BIT(0),
 };
 
 /*
@@ -963,14 +969,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+				       void __iomem *apmixed_base)
 {
-	int tmp;
+	u32 tmp;
+
+	if (!mt->conf->apmixed_buffer_ctl_reg)
+		return;
 
-	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-	tmp &= ~(0x37);
-	tmp |= 0x1;
-	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+	tmp &= mt->conf->apmixed_buffer_ctl_mask;
+	tmp |= mt->conf->apmixed_buffer_ctl_set;
+	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
 	udelay(200);
 }
 
@@ -1070,8 +1080,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
 	if (mt->conf->version == MTK_THERMAL_V2) {
-		mtk_thermal_turn_on_buffer(apmixed_base);
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
 	}
 

-- 
b4 0.10.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ